Efeitos do estresse hídrico sobre o desempenho germinativo da semente de faveira (Clitoria fairchildiana R.A. Howard. - Fabaceae) de diferentes tamanhos

Clitoria fairchildiana R. Howard, vulgamente conhecida como faveira, é uma espécie arbórea utilizada na arborização e recomendada para recuperação de áreas degradada, pois é capaz de atuar como adubo verde. No entanto, há poucos estudos básicos para compreender seus atributos ecológicos e fisiológicos. Desse modo, o presente trabalho teve por objetivo estudar as influências do tamanho da semente e de estresse hídrico sobre a germinação das sementes e vigor de plântulas de faveira. Foram usadas sementes pequenas, médias e grandes, postas para germinar em bandejas, com areia, sob condições de umedecimento de 25%, 50%, 75% e 100% da capacidade de retenção de água. A germinação não é afetada pelo tamanho da semente, mas sim pelo vigor, pois as sementes grandes e médias originam plântulas mais vigorosas. Água em excesso reduziu a porcentagem e a velocidade de germinação ao passo que, falta de água, reduziu o crescimento das plântulas.

Temperaturas para germinação de sementes de Poecilanthe parviflora Bentham (Fabaceae - Faboideae)

Poecilanthe parviflora (coração-de-negro) é uma planta arbórea com potencial para uso em áreas degradadas e no paisagismo. Este trabalho teve por objetivo avaliar condições de temperatura para condução do teste de germinação para as sementes de P. parviflora. Foram realizados dois experimentos paralelos. No experimento 1 foi utilizado o lote denominado de JABOTICABAL que foi submetido à germinação em diferentes temperaturas constantes (10, 15, 20, 25, 30, 35 e 40 ºC) e alternadas (20-30, 25-35 e 20-35 ºC), totalizando 10 tratamentos. No experimento 2 foram utilizados os lotes denominados de USM, SEMEX e JABOTICABAL que foram submetidos à germinação a 25ºC e a 20-30ºC com fotoperíodo de 12 horas, totalizando seis tratamentos. em cada experimento, foram utilizadas quatro repetições de 25 sementes por tratamento. A protrusão da raiz primária (> 0,5 cm) foi adotada como critério para considerar a semente germinada. Foram analisados os seguintes parâmetros: porcentagem de germinação e de plântulas normais, índice de velocidade de germinação, comprimento de plântulas, matéria fresca e seca de plântulas. O delineamento estatístico utilizado foi o inteiramente casualizado e as médias foram comparadas pelo teste de Scott-Knott a 5% de probabilidade. Concluiu-se que o teste de germinação pode ser conduzido a 25 e a 25-35 ºC, com fotoperíodo de 12 horas, por 21 dias.

Potencial fisiológico de sementes de milho hidratadas pelo método do substrato de papel toalha

Na avaliação da qualidade de sementes pode ser necessária a hidratação das mesmas, como ocorre no teste de deterioração controlada que requer a uniformização do teor de água na amostra de sementes antes do processo de deterioração. Objetivou-se com o presente trabalho avaliar o potencial fisiológico de sementes de milho após a hidratação pelo método do substrato de papel toalha, sob diferentes temperaturas e quantidades de água no substrato, para elevar o teor de água para 15%, 20% e 25%. Foram avaliadas três quantidades de água no substrato (2,0; 2,5 e 3,0 vezes a massa do papel), sob temperaturas de 20 e 30°C. A qualidade inicial das sementes e após a hidratação foi determinada pelos seguintes testes: teor de água, massa de mil sementes, germinação, massa seca de plântulas, teste de frio, envelhecimento acelerado, condutividade elétrica, tetrazólio, porcentagem e velocidade de emergência das plântulas em campo. Os dados obtidos foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey, a 5%, seguindo o delineamento inteiramente casualizado em esquema fatorial (3x2), independentemente para cada teor de água. A hidratação pelo método do substrato de papel toalha não afetou a germinação de sementes de milho, independentemente da temperatura e das proporções de água no substrato. As proporções de 2,0 e 2,5 vezes a massa do substrato papel toalha em água para a temperatura de 30°C e de 3,0 vezes a massa do substrato para a temperatura de 20°C não alteraram o potencial fisiológico das sementes, mostrando-se adequadas para hidratação de sementes de milho para teores de água de 15, 20 e 25%.

Germinação de sementes de Stryphnodendron Mart. osmocondicionadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade sanitária e germinação de sementes de pinhão-manso

O pinhão-manso é uma espécie arbustiva que está se destacando pelo interesse para produção de biocombustível, porém, os estudos sobre controle de qualidade das sementes estão se iniciando. Neste trabalho objetivou-se estudar o efeito da temperatura e do tempo de contagem na germinação de sementes de pinhão-manso, conduzido em papel toalha bem como avaliar a qualidade sanitária das sementes, desinfestadas ou não com hipoclorito de sódio, a 2%. O estudo foi conduzido, com sementes de pinhão-manso extraídas de frutos maduros, coletados na planta. O teste de germinação foi conduzido nas temperaturas de 25 ºC e alternadas de 20-30 ºC, com contagens aos 6, 9 e 12 dias. O teste de sanidade foi conduzido a 20 ºC com fotoperíodo de 12 h por 7 dias. Foi utilizado o delineamento experimental inteiramente casualizado com quatro repetições e empregado o teste F na análise de variância dos dados de germinação e do índice de velocidade de germinação. As médias foram comparadas pelo teste de Tukey a 5% de probabilidade. O potencial máximo de germinação das sementes de pinhão-manso foi obtido na temperatura de 25 ºC, com contagens aos seis, nove e 12 dias, entretanto não apresentou diferença significativa com as temperaturas de 20-30 ºC, nas contagens aos 9 e 12 dias. As sementes de pinhão-manso analisadas apresentaram alta frequência de espécies fúngicas, independente da desinfestação superficial. A incidência de fungos em ordem decrescente foi dos gêneros: Alternaria, Macrophomina, Cladosporium, Colletotrichum, Fusarium, Pestalotiopsis, Phoma, Helminthosporium, Epicocum e Nigrospora a maioria destes fungos apresenta potencial patogênico.

Germinação de sementes in vitro e desenvolvimento de plantas ex vitro de algodãozinho-do-campo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Escarificação ácida, temperatura e luz no processo germinativo de sementes de Senna alata (L.) Roxb

O objetivo deste trabalho foi determinar o tempo ótimo de escarificação das sementes de Senna alata em ácido sulfúrico e verificar o efeito da temperatura, em condição de luz e escuro, na germinação de sementes dessa espécie. As sementes foram imersas em ácido sulfúrico concentrado por períodos de 0, 15, 30 e 60 minutos, e o teste de germinação realizado em BOD a 25ºC, utilizando quatro repetições de 50 sementes em cada período de tempo, sendo o delineamento estatístico inteiramente casualizado com 4 tratamentos. No segundo experimento, para verificar o efeito da temperatura e da condição de luz mais adequada a germinação, utilizou-se temperaturas de 10 a 45ºC, com intervalos de 5ºC, em condição de luz fluorescente branca ou escuro contínuo (gerbox preto). Utilizou-se o delineamento experimental inteiramente casualizado, disposto em esquema fatorial 8x2, com 4 repetições, de 50 sementes cada. em todos os testes as avaliações da porcentagem e índice de velocidade de germinação foram feitas diariamente, durante 10 dias, onde as sementes foram consideradas germinadas quando apresentaram 2 mm de raiz. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey a 5% de probabilidade. A escarificação do tegumento com ácido sulfúrico durante 60 minutos, foi ideal para as sementes de Senna alata, por proporcionar maiores valores na porcentagem e velocidade de germinação. A germinação ocorre entre 15 e 40ºC, sendo consideradas fotoblásticas neutras entre 20 e 40ºC e fotoblásticas negativas preferenciais a 15ºC. O melhor desempenho germinativo foi obtido nas temperaturas de 25, 30 e 35ºC, onde ocorreram maior porcentagem e velocidade de germinação.

Effects of the seed predator Acanthoscelides schrankiae on viability of its host plant Mimosa bimucronata

Seeds of Mimosa bimucronata are heavily infested (pre-dispersal predation) by the bruchid beetle Acanthoscelides schrankiae in Brazil. In this study, firstly we set up experiments to assess seed germination under seven and six different light and temperature regimes, respectively, and then we evaluated the ability of seeds to germinate after predation. We tested the hypothesis that the non-predated seeds from infested fruits may respond differently when set for germination than those seeds of non-infested fruits. We also hypothesized that predation may increase the production of unviable seeds. Seeds under 18 hours of light presented the highest percentage of germination, and the alternating temperature 20-30 degrees C was considered as optimum for germination (abnormal seedlings were not considered as a successful germination). Germination of seeds from non-infested fruits was significantly higher than germination of non-predated seeds from infested fruits, and predation also caused a significant increase in the proportion of dead seeds. Our results also show a positive correlation between proportions of unviable seeds and predated seeds. These results demonstrated that seeds of M. bimucronata are strongly affected by predation because predated seeds did not germinate and non-predated seeds had their viability reduced when located in infested fruits, supporting our hypothesis.

Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners

Statement of problem. Two problems found in prostheses with resilient liners are bond failure to the acrylic resin base and increased permanent deformation due to material aging.Purpose. This in vitro study evaluated the effect of varying amounts of thermal cycling on bond strength and permanent deformation of 2 resilient denture liners bonded to an acrylic resin base.Material and methods. Plasticized acrylic resin (PermaSoft) or silicone (Softliner) resilient lining materials were processed to a heat-polymerized acrylic resin (QC-20). One hundred rectangular specimens (10 X 10-mm(2) cross-sectional area) and 100 cylindrically-shaped specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Specimens were divided into 9 test groups (n=10) and were thermal cycled for 200, 500, 1000, 1500, 2000, 2500, 3000, 3500, and 4000 cycles. Control specimens (n=10) were stored for 24 hours in water at 37degreesC. Mean bond strength, expressed as stress at failure (MPa), was determined with a tensile test using a universal testing machine at a crosshead speed of 5 mm/min. Analysis of failure mode, expressed as a percent (%), was recorded as either cohesive, adhesive, or both, after observation. Permanent deformation, expressed as a percent (%), was determined using ADA specification no. 18. Data from both tests were examined with a 2-way analysis of variance and a Tukey test (alpha=.05).Results. For the tensile test, Softliner specimens submitted to different thermal cycling regimens demonstrated no significantly different bond strength values from the control; however, there was a significant difference between the PermaSoft control group (0.47 +/- 0.09 MPa [mean +/- SD]) and the 500 cycle group (0.46 +/- 0.07 MPa) compared to the 4000 cycle group (0.70 +/- 0.20 MPa) (P<.05). With regard to failure type, the Softliner groups presented adhesive failure (100%) regardless of specimen treatment. PermaSoft groups presented adhesive (53%), cohesive (12%), or a combined mode of failure (35%). For the deformation test, there was no significant difference among the Softliner specimens. However, a significant difference was observed between control and PermaSoft specimens after 1500 or more cycles (1.88% +/- 0.24%) (P<.05).Conclusions. This in vitro study indicated that bond strength and permanent deformation of the 2 resilient denture liners tested varied according to their chemical composition.

Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners

Statement of problem. Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging.Purpose. This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases.Material and methods. Four soft lining materials (Molloplast-B, Flexor, Permasoft, and Pro Tech) and 2 acrylic resins (Classico, and Lucitone 199) were processed for testing according to manufacturers' instructions. Twenty rectangular specimens (10 X 10-mm(2) cross-sectional area) and twenty cylinder specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Samples were divided into a test group that was thermocycled 3000 times and a control group that was stored for 24 hours in water at 37degreesC. Mean bond strength, expressed in megapascals (Wa), was determined in the tensile test with the use of a universal testing machine at a crosshead speed of 5 mm/min. Elasticity, expressed as percent of permanent deformation, was calculated with an instrument for measuring permanent deformation described in ADA/ANSI specification 18. Data from both tests were examined with 1-way analysis of variance and a Tukey test, with calculation of a Scheffe interval at a 95% confidence level.Results. In the tensile test under control conditions, Molloplast-B (1.51 +/- 0.28 MPa [mean SD]) and Pro Tech (1.44 +/- 0.27 MPa) liners had higher bond strength values than the others (P < .05). With regard to the permanent deformation test, the lowest values were observed for Molloplast-B (0.48% +/- 0.19%) and Flexor (0.44% +/- 0.14%) (P < .05). Under thermocycling conditions, the highest bond strength occurred with Molloplast-B (1.37 +/- 0.24 MPa) (P < .05) With regard to the deformation test, Flexor (0.46% +/- 0.13%) and Molloplast-B (0.44% +/- 0.17%) liners had lower deformation values than the others (P < .05).Conclusion. The results of this in vitro study indicated that bond strength and permanent deformity values of the 4 soft denture liners tested varied according to their chemical composition. These tests are not completely valid for application to dental restorations because the forces they encounter are more closely related to shear and tear. However, the above protocol serves as a good method of investigation to evaluate differences between thermocycled and control groups.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

FIBER TYPES DISTRIBUTION IN THE DIGASTRIC MUSCLE OF TUFTED CAPUCHIN MONKEY (CEBUS-APELLA)

Fiber types distribution in the diagastric muscle of tufted capuchin monkey was studied by means of NADH-TR, myosin-ATPase, after alkaline and acid preincubations and SDH histochemical reactions. Three different types of fibers were found presenting an equal distribution. The percentage and types of fibers were as follow: 18.2 % SO (Slow Oxydative), 38.4 % FOG (Fast Oxydative Glycolytic) and 43.4 % FG (Fast Glycolytic). FG fibers revealed the largest area. The relatively high concentration of fast twitch (81.2 %) seems to indicate this muscle is involved with the acceleration and fast speed of jaw movements. Aerobic metabolism represented by SO + FOG fibers (56.6 %) suggests that this muscle possesses an additional role than that related to the lowering of the jaw.

Fracture strength of bovine incisors after intra-radicular treatment with MTA in an experimental immature tooth model

Aim To evaluate, using an experimental immature tooth model, the fracture resistance of bovine incisors submitted to different reinforcement treatments with mineral trioxide aggregate (MTA).Methodology An immature tooth model was created by sectioning the coronal and apical portions of 40 bovine incisors 8 mm above and 12 mm below the cementoenamel junction. The root canals were irrigated with 1.0% sodium hypochlorite. They were enlarged both coronally and apically using number 703 carbide burs (ISO: 500-104-168-007-021) and their internal diameter was standardized to 2.1 mm. The specimens were assigned to four groups (n = 10): GI-control (without filling); GII-apical MTA plug + filling with gutta-percha and endodontic sealer; GIII-filling with MTA; GIV-apical MTA plug + filling with MTA + metallic post (Reforpost I). A polyether impression material was used to simulate the periodontal ligament. The specimens were submitted to a compressive load at a crosshead speed of 0.5 mm min(-1) in a servo-hydraulic universal testing machine (MTS 810) applied at 45 degrees to the long axis of the tooth until failure. Data were submitted to statistical analysis by the Kruskal-Wallis test at 5% significance level.Results GIV presented the highest fracture resistance (32.7N) and differed significantly from the other groups (P < 0.05). No statistically difference was found between GII (16.6N) and GIII (23.4N) (P > 0.05). GIII had a significantly higher fracture resistance than GI (P < 0.05).Conclusions the use of MTA + metallic post as an intra-radicular reinforcement treatment increased the resistance to fracture of weakened bovine teeth in an experimental immature tooth model.

Hardness and compressive strength of indirect composite resins: effects of immersion in distilled water

The aim of this study was to evaluate the effect of ageing in distilled water on the hardness and compressive strength of a direct composite resin Z100, a feldspatic porcelain (Noritake) and three indirect composites (Artglass, Solidex and Targis). For the Vickers hardness tests, five disk-shaped specimens (2 x 4 mm) of each material were prepared according to the manufacturers' instructions. The hardness tests were conducted using a Vickers diamond indentor. Compressive strength measurements were recorded on cylindrical specimens with a diameter of 6 mm and a length of 12 mm. The compression tests were carried out with a constant cross-head speed of 0.5 mm min(-1) on a mechanical test machine. For each material, 10 specimens were tested after 7 days of dry storage at 37 +/- 1 degreesC and 10 specimens were tested after water storage at 37 +/- 1 degreesC for 180 days. Noritake porcelain specimens showed higher hardness values than the composites. Among the composite materials, Z100 promoted the highest VHN values, regardless of the ageing periods. The results showed that Solidex and Z100 had the highest compressive strength values. Ageing in water reduced the hardness for all composites, but had no long-term effect on the compressive strength.

Flexural strength of autopolymerizing denture reline resins with microwave postpolymerization treatment

Statement of problem. Microwave postpolymerization has been Suggested as a method to improve the mechanical strength of repaired denture base materials. However, the effect of microwave heating oil the flexural strength of the autopolymerizing denture reline resins has not been investigated.Purpose. This study analyzed the effect of microwave postpolymerization on the flexural strength of 4 autopolymerizing reline resins (Duraliner II, Kooliner, Ufi Gel Hard, and Tokuso Rebase Fast) and 1 heat-polymerized resin (Lucitone 550).Material and methods. For each material, 80 specimens (64 X 10 X 3.3 mm) were polymerized according to the manufacturer's instructions and divided into 10 groups (n = 8). Control group specimens remained as processed. Before testing, the specimens were Subjected to postpolymerization in a microwave oven using different power (500, 5,50, or 650 W) and time (3, 4, or 5 Minutes) settings. Load measurements (newtons) were made at a crosshead speed of 5 mm/min using a 3-point bending device with a span of 50 mill. The flexural strength values were calculated in MPa. Data analyses included 3-way and 2-way analysis of variance and the Tukey Honestly Significant Difference test (alpha=.05).Results. The flexural strengths of resins Duraliner 11 and Kooliner were significantly increased (P=.0015 and P=.0046, respectively) with the application of microwave irradiation using different time/power combinations. The materials Lucitone 550, Tokuso Rebase Fast, and Ufi Gel Hard demonstrated no significant strength improvement compared to the corresponding control. Only after microwave postpolymerization irradiation for 3 minutes at 550 W did Lucitione 550 show significantly higher flexural strength than Tokuso Rebase Fast and Ufi Gel Hard relining resins.Conclusion. Microwave postpolymerization irradiation can be an effective method for increasing the flexural strength of Duraliner II (at 650 W) and Kooliner (at 550 W and 650 W for 5 minutes).