Projeto e análise de um sistema de ancoragem para um motor foguete a combustível líquido

This work aims the design and analysis of a thrust frame system for a liquid fuel rocket engine. The project was developed following the design requirements established by the Division of Space Propulsion of the Institute of Aeronautics and Space. The layout of the structure was developed with the aid of a software of 3D modeling and static and dynamic analysis were performed by using a finite element package. The results of the analyzes helped in defining the layout of the structure which met all design requirements. The safety factor and the mass achieved were comfortably low, which may be useful in the future because the liquid fuel rocket engine is still in development

Otimizando vibrações sísmicas em estruturas através de controles híbridos

Pós-graduação em Engenharia Mecânica - FEIS

A frente nacional contra a privatização da sáude: direito garantido, não se compra, não se vende

Pós-graduação em Serviço Social - FCHS

Considerações sobre o uso do piercing lingual

Objective: Investigated the consequences of tongue piercing in individuals from the city of Araraquara, São Paulo, Brazil. Methods: In Araraquara there are five piercing shops, but only two agreed to help the research by providing the contact information of customers who had had their tongues pierced. These customers were contacted by telephone. By the end of the research, the sample consisted of 100 individuals from both genders aged 18 years or more. Not all of them still had their tongue piercing. A form with six objective questions was used to collect information. The information was then analyzed by descriptive statistics. Results: From the 100 participants, 77 had been using tongue piercing for more than 6 months. It took less than 4 months for the tongue to heal. Sixty–eight individuals used oral rinses and of these, 19 also used painkillers. Only 11 individuals did not present symptoms after the first weeks using the piercing. On the other hand, 56 individuals reported complications such as increased salivation, speaking difficulties, gingival or mucosal traumas, dental fractures and eating difficulties. Conclusion: All these tongue-piercing complications justify efforts to inform the youth about the use of piercing in the oral cavity.

Uso de redes neurais com adaptação de pesos por modos deslizantes para controle de sistemas e aplicações em máquinas elétricas

Pós-graduação em Engenharia Elétrica - FEIS

Dinâmica e controle de um sistema Maglev simplificado

Pós-graduação em Engenharia Mecânica - FEIS

Métodos de identificação e redução de modelos para atenuação de vibrações em estruturas inteligentes

Pós-graduação em Engenharia Mecânica - FEIS

Controle ativo de estruturas reticuladas utilizando atuadores de pilha de pzt

Pós-graduação em Engenharia Mecânica - FEIS

Tendência de crescimento facial em ortodontia e ortopedia funcional dos maxilares

The knowledge of the facial growth trend is very important in orthodontic treatment. A lateral headfilm is recommended in all young patients undergoing a preorthodontic guidance program to anticipate the best time to begin any mechanical procedures and the possibilities to determine the type of facial growth trend. In type A it will be observed that the middle and lower face are growing forward and downward in unison, with no change in ANB angle. Type B growth trends reveals that growth is downward and forward, with the middle face growing forward more rapidly than the lower and in type C the lower face is growing downward and forward more rapidly than the middle face revealing a decrease in the size of the ANB angle.

Non-nutritive sucking associated with self-mutilating behavior

Although sucking activity has been considered an essential behavior of early childhood to satisfy nutritive and non-nutritive needs, digit and pacifier sucking are deleterious oral habits that may interfere with child development. Furthermore, this clinical picture may be compounded by other concerning habits, such as self-mutilating behavior. This article reports 4-year follow-up of a child in whom non-nutritive sucking was associated with an unusual self-mutilating behavior; namely, the child would pull out her own hair after wrapping it around her finger every time she sucked on the pacifier. This occurred specially at bedtime, while she was watching TV, or when she was somewhat anxious, and remitted and recurred throughout the follow-up period. In an attempt to address this behavior, pacifier use was discontinued and the child’s head was shaved. Ultimately, the case was only solved through combined efforts involving the child, her family, and health professionals. Based on the parents’ reports and clinical examination and follow-up findings, we emphasize the importance of investigating the origin of the problem and considering emotional aspects and its association with other habits in such cases.

Redução do medo durante o tratamento odontológico utilizando pontas ultrassônicas

Over the last few years, new technologies have been developed to making cavity preparations, among which the diamond burs CVDentus® (CVDentus, São José dos Campos, Brazil) are outstanding. These points are produced by chemical deposition from the vapor phase, forming a single diamond stone, with greater durability than the conventional diamond burs. Coupled to the ultrasound appliance, they have several clinical applications in Dentistry with advantages over conventional rotary instruments, such as lower pressure, noise, vibration and heat, as well as reducing the need to use local anesthesia, contributing to minimize patient’s fear and anxiety. The aim of this study was to present the complete restorative dental treatment performed with this system in a child patient with a prior history of non-cooperative behavior. The use of this new technology offered the patient greater comfort, making it possible recondition the patient’s attitude to dental treatment, in addition to favoring conservative cavity preparations to be made.

Educação em saúde em comunidades quilombolas

To appraise the oral health knowledge of parents and children from the quilombola communities located in the Ribeira Valley, Sao Paulo. Methods Preventive and educational activities in oral health were developed with children in the communities (Andre Lopes, Ivaporunduva, Pedro Cubas and Sapatu) including lectures, guidance on tooth brushing techniques, supervised mass brushing, detection of tooth biofilm and topical application of fluoride. Parents also participated in the activities. They were evaluated on the oral health of their children by means of a standard questionnaire. The water supply of the communities was also analyzed. Results The children participated enthusiastically and responsively in the preventive and educational activities. As to the questionnaires, 56% of parents stated that their children’s oral health was poor and 47.2% of them usually follow up on their children’s oral hygiene until they are approximately six years old, but this follow-up is not frequent. Conclusion We conclude that quilombola parents and children have very little knowledge about oral health. Therefore increased attention to oral health is required in these communities by means of frequent oral health education and promotion.

Comparação entre soluções irrigadoras na endodontia: clorexidina x hipoclorito de sodio

The objective of this review was reporting an overview about the properties of two irrigating solutions, solution of sodium hypochlorite and chlorhexidine, used in the treatment of root canals. A solution must submit irrigating antimicrobial action, dissolve waste tissue, promote wetting to facilitate the instrumentation, and present biocompatibility with the adjacent tissues. The sodium hypochlorite used in different concentrations has been the solution of choice among professionals by presenting antimicrobial action and act as a solvent tissue. However, today, chlorhexidine has been widely used as an irrigating solution due to specific properties that enable its use, such as substantivity, antimicrobial effectiveness, and low toxicity. Thus the solution of chlorhexidine with different concentrations is presented as an alternative to irrigating solution for the treatment of root canals.

Análise histomorfométrica do reparo ósseo em tíbias de ratos castrados submetidos ao efeito do alendronato sódico

This study used histomorphometric analysis to investigate the effect of sodium alendronate, used for the treatment of osteoporosis, on the repair of surgically-induced bone defects in the tibia of castrated rats. Methods: The castrated animals were given subcutaneous injections of sodium alendronate (0.7mg/Kg) diluted in saline once a week; the control animals were given the same dose of saline. At 16, 30 and 44 days after the first injection of sodium alendronate, the animals were sacrificed and the right tibias were removed and processed for histomorphometric analysis. The volumetric bone mineral density was estimated by a reticular grid (25 points) attached to a light microscope. The number of points on the bone tissue was counted in the histological sections, totaling 100 points/animal. Results: The results revealed that sodium alendronate stimulated bone formation in castrated rats in all occasions, mainly at 16 and 30 days. Conclusion: Sodium alendronate affects mineral homeostasis, promoting bone repair.

Efeito de fontes de luz na microdureza de resinas compostas

This study assessed the surface microhardness of compound resins cured by different light sources. Methods Three micro hybrid (Vit-l-escence, Amelogen Plus, Opallis) and one nanoparticle (Filtek Z350, 3M ESPETM Dental Products, St. Paul, USA) compound resins were selected. The resins were polymerized by a halogen light unit (Ultralux, Dabi Atlante, Ribeirão Preto, Brasil) with two tips, one semi-guided made of glass and another of painted acrylic and a LED-based source (UltraLume 2, Ultradent®, South Jordan, USA). Specimens constructed from a circular aluminum matrix were photopolymerized for 40 second after they received the compound resin and stored dry for 24 hours. After this period, a Vickers surface microhardness assay was performed, measuring the top (hardness 1) and base (hardness 2) surfaces four times each. Variance analyses were complemented by Newman-Keuls method, with significance set at 5%. Results The Opallis (FGM, Santa Catarina, Brasil) resin subjected to UltraLume 2 (Ultradent®, South Jordan, USA) obtained the lowest mean hardness values for the top surface. The Vit-l-escence (Ultradent®, South Jordan, USA) compound cured by Led UltraLume 2 (Ultradent®, South Jordan, USA) and by Ultralux PCP (Dabi Atlante, Ribeirão Preto, Brasil) halogen light obtained the highest mean hardness, followed by the Filtek Z350 (3M ESPETM Dental Products, St. Paul, USA) resin subjected to UltraLume 2 (Ultradent® South Jordan, USA). The Opallis (FGM, Santa Catarina, Brasil) resin cured by LED UltraLume 2 (Ultradent®, South Jordan, USA) also obtained the lowest mean hardness for the base surface and the Vit-L-Escence (Ultradent®, South Jordan, USA) resin obtained the highest value, followed by Amelogen Plus, when cured by Ultralux (Dabi Atlante, Ribeirão Preto, Brasil) using the semi-guided tip. Conclusion The polymerization and, consequently, the microhardness achieved by the LED unit was equivalent to those achieved by conventional halogen units for three of the four composites tested.