Comparative wood anatomy of root and stem of Citharexylum myrianthum (Verbenaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação quantitativa do uso dos recursos hídricos em unidade de conservação e entorno: estudo de caso do Parque Estadual da Serra do Mar

Pós-graduação em Engenharia Civil e Ambiental - FEB

A anatomia e o ensino de anatomia no Brasil: a escola boveriana

There is little scholarly research on the history, teaching and research of human anatomy in Brazil. A broader vision of the progress of anatomy under different circumstances in the country is virtually non-existent, leaving researchers keen to study the subject insecure. This is compounded by the fact that the data available are not always reliable. This text retraces the development of the discipline of anatomy and its research and education in Brazil in general and São Paulo state in particular, which can largely be reduced to the action of the self-proclaimed Boverian school of anatomy, founded by Italian physician Alfonso Bovero at the same time as the Medical Faculty of the University of São Paulo.

Desenvolvimento de algoritmos para a avaliação quantitativa de imagens de fantomas mamográficos

There are many advantages when using a phantom for the evaluation of the mammographic images, one of them is to test the visibility of the distribution of objects that constitute it, and then, set the best image in order to obtain a diagnostic medical insurance, trying to reach the best risk - benefit ratio for the patient. Typically, the quality of the mammographic image is performed by subjective and quantitative assessments. This study developed algorithms that can quantitatively evaluate digital images (DICOM), obtained from mammographic phantom consisting of test objects. The results were adjusted by the response of the subjective evaluation performed by experts in radiology. This procedure aims to create an independence of the experts in radiology in daily tests of quality control in routine clinical diagnostic radiology

Anatomia de folhas, brácteas e escapos de Paepalanthus Sect. Diphyomene Ruhland (Eriocaulaceae, Poales)

As Eriocaulaceae brasileiras encontram-se distribuídas principalmente nos campos rupestres que se estendem de Minas Gerais à Bahia, na Cadeia do Espinhaço. Paepalanthus Mart. é o maior gênero da família e apresenta cerca de 450 espécies, sendo que Paepalanthus sect. Diphyomene Ruhl. possui cerca de 20 espécies que já pertenceram a diversas categorias taxonômicas. Com o objetivo de correlacionar a anatomia e a taxonomia desta seção, além de levantar caracteres diagnósticos para suas espécies, foi estudada a anatomia de folhas, brácteas e escapos. Folhas e brácteas de Paepalanthus sect. Diphyomene apresentam diferenças na forma e no espessamento das células epidérmicas; no espessamento do mesofilo; na disposição dos feixes vasculares; presença ou ausência de hipoderme; diferente forma e composição de parede das células da extensão de bainha do feixe vascular; forma e constituição da margem e presença ou ausência de parênquima aqüífero na face adaxial. No escapo, foram observadas diferenças quanto ao número e contorno de costelas e extensão da medula. Assim, a proposta de divisão de P. sect. Diphyomene em duas categorias é corroborada. São caracteres diagnósticos para as espécies: presença de parênquima aquífero na face adaxial e ausência de extensão de bainha do feixe vascular em folhas de Paepalanthus urbanianus; presença de feixes vasculares distribuídos em ordem decrescente de tamanho em direção à margem em folhas e brácteas e contorno triangular do escapo em P. flaccidus, presença de nove costelas em escapos de P. acanthophyllus e dez em P. macer. Foi elaborada uma chave de identificação das espécies de Paepalanthus sect. Diphyomene com base nas características anatômicas levantadas

Fractografia quantitativa: correlação entre dimensão fractal e tenacidade à fratura em compósitos fibra de carbono/epóxi

The fracture surfaces express the sequence of events of energy release due to crack propagation by linking the relief of the fracture to the loading stresses. This study aims to evaluate the heterogeneity of the critical zone for the advancement of the crack along its entire length in a thermoset composite carbon fiber and epoxy matrix, fractured in DCB testing (Double Cantilever Beam) and ENF (End-Notched Flexure). Investigations were made from image stacks obtained by optical reflection of extended depth from focus reconstruction. The program NIH Image J was used to obtain elevation map and fully focused images of the fracture surface, whose topographies were quantitatively analyzed. The monofractal behavior for DCB samples was assessed as being heterogeneous along the crack front and along the crack for all the conditionings. For the samples fractured in ENF test, there was a strong positive correlation to the natural condition, considering the fibers at 0° for the monofractal dimension and structural dimension (Df and Ds). For fibers at 90° to crack propagation, there was a moderate positive correlation for the textural dimension of natural condition. However, for the samples under ultraviolet condition and those subjected to thermal cycles, there was no correlation between the fractal dimension and fracture toughness in mode II

Desenvolvimento e validação de uma técnica quantitativa de análise de imagem para avaliação do teste do cometa corado pela prata

The comet assay is a method of DNA damage analysis widely used to quantify oxidative damage, crosslinks of DNA, apoptosis and genotoxicity of chemicals substances as chemical, pharmaceuticals, agrochemicals products, among others. This technique is suitable to detect DNA strand breaks, alkali-labile sites and incomplete excision repair sites and is based on the migration of DNA fragments by microeletroforesis, DNA migrates for the anode forming a “tail”, and the formed image has the appearance of a comet. The slides can be stained with fluorescence or silver, having differences in the microscopy type used for the analysis and the possibility of storage of the slides, moreover, the first one is a stained-method with more difficulties of accomplishment. The image analysis can be performed by a visual way, however, there is a disadvantage as the subjectivity on the results, that can be minimized by an automated method of digital analysis. This process was studied in this report with the aim to perceive the validation of the digital analysis turning it a quantitative method with larger reproductibility, minimizing the variability and imprecision due to the subjective analysis. For this validation we selected 50 comets photographed in a standardized way and printed, afterwards, pictures were submitted to three experienced appraisers, who quantified them manually. Later, the images were processed by free software ImageJ 1.38x, printed and quantified manually by the same appraisers. The intraclass correlation was higher to comet measures after image processing. Following, an algorithm of automated digital analysis from the measures of the comet was developed; the values obtained were compared with those 12 estimated manually after the processing resulting high correlation among the measures. The use of image analysis systems increases ...(Complete abstract click electronic access below)

Anatomia de folhas e escapos de espécies brasileiras de Rapateeae (Rapateoideae - Rapateaceae)

Estudou-se a anatomia de Spathanthus, Rapatea, Cephalostemon e Duckea pertencentes à tribo Rapateeae (Rapateoideae, Rapateaceae), buscando levantar caracteres úteis para a taxonomia. Todas as espécies estudadas apresentam células epidérmicas com a parede periclinal externa levemente espessada e feixes de fibras subepidérmicos em ambos os órgãos; feixes vasculares na região mediana da folha, com bainha de fibras conspícua no floema; e escapos com idioblastos contendo compostos fenólicos na epiderme e no parênquima, que são características que suportam a tribo. O formato do escapo em secção transversal diferencia os gêneros, enquanto a forma e estrutura da nervura central do limbo foliar tem valor diagnóstico. São características exclusivas de Spathanthus: células epidérmicas com corpos silicosos com distribuição aleatória e parênquima clorofiliano plicado no limbo foliar; e presença de feixes de fibras no mesofilo e no parênquima do escapo. Spathanthus distingue-se também pelo número, tipo e distribuição dos feixes vasculares no escapo. O gênero Rapatea caracteriza-se pela presença de estômatos e células com corpos silicosos apenas na epiderme abaxial das folhas e pela presença de parênquima clorofiliano braciforme no limbo foliar. Rapatea paludosa distingue-se por apresentar folha com extensão da bainha dos feixes vasculares em ambas as faces da epiderme e escapos com alas desiguais, enquanto Rapatea ulei apresenta escapos com alas do mesmo tamanho e tricomas contendo compostos fenólicos. São caracteres com valor diagnóstico para Cephalostemon riedelianus: células epidérmicas com paredes retas em vista frontal e escapo com córtex definido, cordões esclerenquimáticos subepidérmicos voltados aos feixes vasculares maiores e medula fistulosa

Laboratório de anatomia: um espaço para a construção de sentidos sobre o corpo humano pelos escolares?

A busca de compreensão da complexa dinâmica envolvendo os processos interativos entre professores e alunos tem motivado o desenvolvimento de pesquisas relacionadas a padrões de interação em sala de aula e suas consequências para o no contexto do ensino e da aprendizagem. Este trabalho sistematiza e analisa os conteúdos tratados, bem como as questões levantadas por uma monitora de um Projeto de Extensão em Anatomia Humana e alunos de ensino médio durante as atividades realizadas na bancada do sistema excretor-reprodutor em um laboratório de Anatomia Humana, além de identificar as classes de abordagens comunicativas presentes nessas interações. A ênfase em aspectos morfofisiológicos dos sistemas humanos, assim como a opção por um estilo de trabalho baseado na argumentação retórica, adotado pela monitora, renegou a um segundo plano tanto a interatividade quanto a dialogicidade como padrões de interação neste contexto estudado

Anatomia foliar de espécies de Bulbophyllum, seção Micranthae Barb. Rodr. (Orchidaceae) e sua correlação com a taxonomia

Orchidaceae é uma das maiores famílias de Angiospermas, com distribuição cosmopolita, sendo que Bulbophyllum é o maior gênero da família, com mais de 1200 espécies. A seção Micranthae apresenta 12 espécies distribuídas na América do Sul e com grande representatividade no Brasil. A interpretação das Orchidaceae de maneira geral, é dificultada pela grande diversidade de espécies, gerando problemas taxonômicos. Visando levantar caracteres diagnósticos para as espécies e estados de caráter compartilhados entre elas, foram realizados estudos anatômicos das folhas de 11 espécies de Bulbophyllum seção Micranthae e de outras três espécies de Bulbophyllum constituindo o grupo externo. As estruturas anatômicas: epiderme unisseriada com cera epicuticular espessa; estômatos tetracíticos com câmaras supraestomáticas; presença de hipoderme e de feixes vasculares colaterais caracterizam as espécies estudadas. A forma cilíndrica da folha de Bulbophyllum insectiferum Barb. Rodr. é caráter diagnóstico da espécie, assim como a ausência de idioblastos traqueoidais de paredes espessadas em Dendrobium kingianum Bidwill ex Lindl. A morfologia das folhas, forma da lâmina foliar em secção transversal, forma das células epidérmicas em vista frontal, tipo de mesofilo, tipos de cristais e número de feixes vasculares são caracteres que permitem agrupamentos entre as espécies analisadas. Esses caracteres serão utilizados numa futura análise cladística procurando auxiliar a filogenia do grupo

Comportamento de oviposição em Chrysomya megacephala (F.) (Diptera: Calliphoridae): distinção quantitativa frente a posturas prévias?

Chrysomya megacephala (Fabricius), has considerable medical, veterinary and forensic importance. In insects in general, the ability to track the food substrate is due to highly sensitive organs adapted for detecting odors, particularly in the case of blowflies, which is one of carcass main consumers. Eggs of blowflies are usually aggregated in function of the behavior of other pheromone mediated by females laying eggs in place on the same substrate. One of the main reasons for studying oviposition behavior is because it may indirectly affect individual qualification, population dynamics and community structure. It has been suggested that female blowflies can evaluate the number of eggs on a substrate, decreasing the size of oviposition in very saturated substrates with larvae or eggs leading to a lower intraspecific competition. The present study investigated the oviposition behavior of females of C. megacephala, and wished to consider whether they are able to distinguish quantitatively (size of the mass) eggs previously put into a place of posture and hence indicate whether there is a limit beneficial (to avoid competition among larvae) for its oviposition on the same substrate or if that place would already be saturated, requiring find another substrate without eggs or less for futures ovipositions. With 20 females and five males, five treatments were applied, repeated ten times and analyzed using the Mann-Whitney test. Each treatment consists in placing, inside the cage, a flask with 50g of ground beef and another one in the other side, with the same amount of substrate with a certain amount of prior oviposition for a period of 5 hours. The masses prior eggs were used 0.03 g, 0.05 g, 0.1 g, 0.2 g and 0.3 g (respectively, T1, T2, T3, T4 and T5). The other part of the work consisted in the use of a “Y” olfactometer, a device used to determine the choice of an invertebrate against... (Complete abstract click electronic access below)

Ciência da carne: a linguagem gráfica da anatomia humana

This monograph seeks to provide an exposition and theoretical examination of Ciência da Carne (“Science of the Flesh”), a series of artworks in woodcut printing executed after research into the artistic aspects of Human Anatomy, done throughout the Graduate Course in Visual Arts at UNESP’s Art Institute. Traditional procedures of naturalistic representation of the human figure often adopt the scientific basis of Anatomy as a means of interpreting the surface contours of the body from its inside out. The historical connection between Anatomy and Art, however, is not merely accidental, for it is integral to the development of both disciplines, which find themselves deeply related in the human impulse for self-discovery and reinvention of its own likeness. The series of artworks collected in Ciência da Carne explores, through the particular graphical language provided by woodcut printing, abstract arrangements of isolated anatomical elements, at once removed from the context of traditional figurative representation and from the didactic goals of medical illustration.

Avaliação quali-quantitativa das parcelas escoadas, percoladas e armazenadas em instalação experimental piloto de telhado verde extensivo com diferentes inclinações

This study investigated the effect of slope and antecedent soil moisture on the water depth stored and percolated on extensive green roofs built in pilot scale. For this purpose, slopes of 10, 20 and 30% were investigated. Moisture was measured before and after each test to determine the differential moisture (ΔU). A rainfall simulator was designed and tested; the best arrangement presents a Christiansen Uniformity Coefficient of 56%. The results yielded that the slopes of 10% presented the highest values of water depth stored (59,88%), water depth percolated (77,15%), the slope of 30% presented the highest water depth drained (48,22%.) and there was no correlation between slope, water depth stored, water depth percolated and ΔU. It was verified the effect of dilution on the modules i10% between water depth percolated and apparent color (0.71%) in i20% between water depth drained and apparent color (-0.748%) and in the module i30% between water depth drained and turbidity (-0.76%) and water depth drained and apparent color (-0.93%). In i10% there was high correlation between pH and water depth percolated (0.94%) and between water depth drained and pH (0.71%). The data indicate that the module i10% had a greater reduction of runoff

Fractografia quantitativa e o conceito de tenacidade à fratura para a análise do efeitodo choque térmicos em TiO2

The present study evaluated the use of semicircular bending test (SCB) as an alternative to conventional bending test to examine the effect of thermal shock. Still, studies the behavior of fracture surfaces generated by monofractal behavior analysis, which allows us to evaluate the contributions of the microstructure and the mechanical context in forming reliefs during the crack propagation. The fractal analysis is made from elevation maps obtained by reconstruction method by extension of the focus stacks of digital images acquired in microscope. The specimens used were samples semicircular pressed TiO2 (rutile) with and without heat shock, prepared for testing mode I loading. Were also produced, specimens in the form of bars for Weibull statistical analysis. From the three-point bending test, we found the variation of fracture toughness between the samples after the heat shock and natural condition. The SCB test was feasible for the analysis of thermal shock resistance. The results showed that the value of the fracture toughness decreases as the heat shock treatment

Estudo in vitro da anatomia das projeções de esmalte cervical em dentes molares

The cervical enamel projection (CEP) is an anatomic variation that can be found in the cement enamel junction, it´s recognition and early diagnosis improves outcome the tooth involved, allowing greater efficiency in treatment. The knowledge of the location, grade and incidence of CEP is decisive on prevention and treatment of periodontal disease. It were studied 1200 molars (600 mandibular molars and 600 maxillary molars) separated from the collection of teeth on the Discipline of Anatomy in FOSJCampos - UNESP. Each group of 600 teeth was separated from the second side (300 teeth) and the second type (first, second or third molar). Each tooth had thoroughly inspected the cervical region, in all their faces, in order to verify the incidence and the grade of CEP in each surface. It was found that the CEP covered in 278 (23,17%) teeth was 146 (52,52%) mandibular molars and 132 (47,48%) maxillary molars. The CEPs were concentrated on a tooth surface in 222 (79,86%) teeth, in two surfaces 53 (19,06%) teeth, and in three surfaces in three (1,08%) teeth. From the total of 4.800 surfaces examined the CEPs were found in 337 surfaces, and 228 (67,66%) surfaces of the grade I, 60 (17,8%) grade II and 49 (14,54%) grade III. The buccal surface presented 207 (61,42%) CEP, the lingual surface in 57 (16,91%), the mesial surface in 35 (10,39%) and the distal surface in 38 (11,28%) CEP. The results of this study demonstrated that the CEPs have focused more on the mandibular teeth on only one surface of the tooth, the grade I was the most found and the buccal surface the most involved