Effect of Qualea multiflora on Macrophages and Tumour Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alpha and beta diversity of lepidoptera in eucalyptus plantations in the amazonian region of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of follicle age on conception rate in beef heifers

The objective of this study was to determine the effect of age of the ovulatory follicle on fertility in beef heifers. Ovulation was synchronized with the 5 d CO-Synch + controlled intravaginal drug release (CIDR) program in heifers in Montana (MT; n = 162, Hereford and Angus Crossbred) and Ohio (OH; n = 170, Angus Crossbred). All heifers received estradiol benzoate (EB; 1 mg/500 kg BW, [i.m.]) 6 d after the final GnRH of the synchronization program to induce follicular atresia and emergence of a new follicular wave (NFW) followed by prostaglandin F2 alpha (PGF(2 alpha); 25 mg, i.m.) administration either 5 d (young follicle [YF]; n = 158) or 9 d (mature follicle [MF]; n = 174) after EB. Estrous detection was performed for 5 d after PGF(2 alpha) with AI approximately 12 h after onset of estrus. Ovarian ultrasonography (MT location only) was performed in YF and MF at EB, 5 d after EB, PGF(2 alpha), and AI. Heifers in MT (n = 20) and OH (n = 18) that were not presynchronized or did not initiate a NFW were excluded from further analyses, resulting in 142 and 152 heifers in MT and OH, respectively. Heifers from the MF treatment in MT that initiated a second NFW after EB but before PGF(2 alpha) (MF2; n = 14) were excluded from the primary analysis. In the secondary analysis, the MF2 group was compared to MF and YF treatments in MT. Estrous response was similar (90%; 252/280) between treatments and locations. Proestrus interval (from PGF(2 alpha) to estrus) and age of the ovulatory follicle at AI were similar for MF heifers between locations (54.6 +/- 1.7 h and 8.3 +/- 0.07 h) but were greater (P < 0.01) for YF heifers in OH (78.5 +/- 1.4 h and 5.3 +/- 0.06 h) than MT (67.4 +/- 1.6 h and 4.8 +/- 0.06 h; treatment x location, P < 0.01). However, conception rate did not differ for MF (63.8%; 74/116) and YF (67.0%; 91/136) treatments. In the MT heifers, follicle size and follicle age atAI in the YF treatment (10.4 +/- 0.15 mm and 4.8 +/- 0.06 d, respectively) was less (P < 0.01) than in the MF treatment (11.0 +/- 0.18 mm and 8.3 +/- 0.11 d, respectively), but conception rate to AI did not differ between treatments in MT. In the MF2 group proestrus interval was greater (P < 0.01); hence, diameter of the ovulatory follicle and age were similar to that for the YF treatment. Conception rate to AI did not differ between MF2, MF, and YF (61.5, 63.3, and 64.7%, respectively) in MT. In conclusion, manipulation of age of the nonpersistent ovulatory follicle at spontaneous ovulation did not influence conception rate.

Effect of progesterone concentrations, follicle diameter, timing of artificial insemination, and ovulatory stimulus on pregnancy rate to synchronized artificial insemination in postpubertal Nellore heifers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of follicle age on pregnancy rate in beef cows

The effect of the age of the ovulatory follicle on fertility in beef cows was investigated. Multiparous (n = 171) and primiparous (n = 129) postpartum beef cows in 2 groups (G1 and G2) received estradiol benzoate (EB; 1 mg/500 kg BW, intramuscular [i.m.]) 5.5 d (G1; n = 162) and 6.5 d (G2; n = 138) after the final GnRH of a synchronization program (5d CO-Synch + CIDR) to induce emergence of a new follicular wave (NFW), followed by prostaglandin F2 alpha (PGF2 alpha; 25 mg, i.m.) administration either 5.5 d (young follicle, YF; n = 155) or 9.5 d (mature follicle, MF; n = 145) after EB. Estrous detection coupled with AI 12 h later (estrus-AI) was performed for 60 h (MF) and 84 h (YF) after PGF(2 alpha); cows not detected in estrus within this period received timed AI (TAI) coupled with GnRH at 72 and 96 h, respectively. Within the first 72 h after PGF(2 alpha), more (P < 0.01) cows in the MF (76.3%) than YF treatment (47.7%) exhibited estrus, but through 96 h, the proportion detected in estrus (P < 0.05) and interval from PGF(2 alpha) to estrus (P < 0.01) were greater in the YF than MF treatment (88.6% vs. 76.3%, 78.9 +/- 0.8 vs. 57.5 +/- 1.6 h, respectively). Age of the ovulatory follicle at AI was greater (P < 0.01) in the MF (9.32 +/- 0.04 d) than YF (6.26 +/- 0.02 d) treatment, but follicle diameter at AI and pregnancy rates did not differ between MF (13.1 +/- 0.2 mm; 72.0%) and YF (12.9 +/- 0.1 mm; 67.1%) treatments. Regardless of treatment, the diameter of the ovulatory follicle at AI and pregnancy rate were greater (P < 0.01) with estrus-AI (13.1 +/- 0.1 mm; 75.0%) than TAI (12.6 +/- 0.2 mm; 55.4%). Cows in the MF treatment that initiated a second NFW after EB but before PGF(2 alpha) (MF2; n = 47) were induced to ovulate with GnRH and TAI at 72h, when ovulatory follicles were 4 d old and 10.2 +/- 0.2 mm in diameter. Pregnancy rate for TAI (51.1%) in MF2 did not differ from TAI pregnancy rate (55.4%) across the MF and YF treatments. In summary, the age of the ovulatory follicle affected interval to estrus and AI but did not influence pregnancy rate in suckled beef cows.

Values of 13,14-Dihydro-15-Keto-PGF(2 alpha), Progesterone and Oestradiol After Injection of Prostaglandin at Different Periods of Buffalo Puerperium

Knowledge of the effectiveness of prostaglandins in uterine involution process led to the development of protocols with its analogues in postpartum period. However, this hormone mechanism of action is not yet fully elucidated. Thus, the objective of this study was to verify if chloprostenol administration, at early or intermediary puerperium, can induce changes on progesterone, PGFM and oestradiol plasma concentrations. 30 Murrah postpartum buffaloes were randomly divided into three groups: CONT (saline, n = 10); CLO2 (chloprostenol at days 2 and 5 postpartum, n = 10) and; CLO15 (chloprostenol at days 15 and 20 postpartum, n = 10). Blood samples were collected from jugular vein to measure progesterone, PGFM and oestradiol plasma concentrations at days 2, 7, 14, 21 and 28 postpartum. CLO2 group presented lower progesterone and PGFM plasma concentrations in relation to CONT and CLO15 groups (0.23 +/- 0.00 and 0.32 +/- 0.11, 0.19 +/- 0.00 and 0.23 +/- 0.11, 0.23 +/- 0.00 and 0.30 +/- 0.19, for groups CONT, CLO2 and CLO15, respectively; P < 0.05). There was no significant difference in oestradiol plasma concentration between experimental groups (P > 0.05). Prostaglandin synthetic analogue administration induced hormonal changes in postpartum buffaloes, which can partially explain its positive effect under reproductive function of this specie.

Effect of intrinsic nanoparticle pigmentation on the color stability of denture base acrylic resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of simulated intraoral erosion and/or abrasion effects on etch-and-rinse bonding to enamel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bond strength of composite to dentin: effect of acid etching and laser irradiation through an uncured self-etch adhesive system

This study evaluated the effect on micro-tensile bond strength (mu-TBS) of laser irradiation of etched/unetched dentin through an uncured self-etching adhesive. Dentinal surfaces were treated with Clearfil SE Bond Adhesive (CSE) either according to the manufacturer's instructions (CSE) or without applying the primer (CSE/NP). The dentin was irradiated through the uncured adhesive, using an Nd: YAG laser at 0.75 or 1 W power settings. The adhesive was cured, composite crowns were built up, and the teeth were sectioned into beams (0.49 mm(2)) to be stressed under tension. Data were analyzed using one-way ANOVA and Tukey statistics (alpha = 5%). Dentin of the fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). The results showed that non-etched irradiated surfaces presented higher mu-TBS than etched and irradiated surfaces (p < 0.05). Laser irradiation alone did not lead to differences in mu-TBS (p > 0.05). SEM showed solidification globules on the surfaces of the specimens. The interfaces were similar on irradiated and non-irradiated surfaces. Laser irradiation of dentin through the uncured adhesive did not lead to higher mu-TBS when compared to the suggested manufacturer's technique. However, this treatment brought benefits when performed on unetched dentin, since bond strengths were higher when compared to etched dentin.

The Gastroprotective Effect of Menthol: Involvement of Anti-Apoptotic, Antioxidant and Anti-Inflammatory Activities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MALDI Imaging Analysis of Neuropeptides in the Africanized Honeybee (Apis mellifera) Brain: Effect of Ontogeny

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pancreatic Alpha-Cell Dysfunction Contributes to the Disruption of Glucose Homeostasis and Compensatory Insulin Hypersecretion in Glucocorticoid-Treated Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adhesion of substrate-adherent combinations for early composite repairs: Effect of intermediate adhesive resin application

This study evaluated the effect of intermediate adhesive resin application (IAR) on tensile bond strength (TBS) for early composite repairs in situations where substrate and repair composite bonded together were once of the same kind with the substrate (similar) and once other than the substrate material (dissimilar). Specimens from three types of composites (TPH Spectrum (TPH), Charisma (CHA) and Filtek Z250 (Z250)) were fabricated. The specimens in each composite group (n=72) were randomly divided into six subgroups (n=12). In each composite group, the similar and two dissimilar composites were bonded onto the substrates once using an IAR (Adper Single Bond Plus) and once without. After water storage for I week at 37 degrees C, substrate-adherent combinations were submitted to tensile test. Data were analyzed with three-way ANOVA and Tukey's tests (alpha=0.05). The substrate-adherent combination (p=0.0001), adherent (repair) composite (p=0.0001), and application of IAR (p=0.0001) significantly affected the results. Utilization of IAR improved the repair bond strength for all composite combinations. (C) 2013 Elsevier Ltd. All rights reserved.

Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex

Purpose: This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon.Materials and Methods: Forty disk-shaped zirconia core (Lava Zirconia, 3M ESPE) (diameter: 3 mm) specimens were veneered circumferentially with a feldspathic veneering ceramic (VM7, Vita Zahnfabrik) (thickness: 2 mm) using a split metal mold. They were then embedded in autopolymerizing acrylic with the bonding surfaces exposed. Specimens were randomly assigned to one of the following surface conditioning protocols (n = 10 per group): group 1, veneer: 4% hydrofluoric acid (HF) (Porcelain Etch) + core: aluminum trioxide (50-mu m Al2O3) + core + veneer: silane (ESPE-Sil); group 2: core: Al2O3 (50 mu m) + veneer: HF + core + veneer: silane; group 3: veneer: HF + core: 30 mu m aluminum trioxide particles coated with silica (30 mu m SiO2) + core + veneer: silane; group 4: core: 30 mu m SiO2 + veneer: HF + core + veneer: silane. Core and veneer ceramic were conditioned individually but no attempt was made to avoid cross contamination of conditioning, simulating the clinical intraoral repair situation. Adhesive resin (VisioBond) was applied to both the core and the veneer ceramic, and resin composite (Quadrant Posterior) was bonded onto both substrates using polyethylene molds and photopolymerized. After thermocycling (6000 cycles, 5 degrees C-55 degrees C), the specimens were subjected to shear bond testing using a universal testing machine (1 mm/min). Failure modes were identified using an optical microscope, and scanning electron microscope images were obtained. Bond strength data (MPa) were analyzed statistically using the non-parametric Kruskal-Wallis test followed by the Wilcoxon rank-sum test and the Bonferroni Holm correction (alpha = 0.05).Results: Group 3 demonstrated significantly higher values (MPa) (8.6 +/- 2.7) than those of the other groups (3.2 +/- 3.1, 3.2 +/- 3, and 3.1 +/- 3.5 for groups 1, 2, and 4, respectively) (p < 0.001). All groups showed exclusively adhesive failure between the repair resin and the core zirconia. The incidence of cohesive failure in the ceramic was highest in group 3 (8 out of 10) compared to the other groups (0/10, 2/10, and 2/10, in groups 1, 2, and 4, respectively). SEM images showed that air abrasion on the zirconia core only also impinged on the veneering ceramic where the etching pattern was affected.Conclusion: Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of the zirconia core / veneering ceramic complex.

Effect of the interfacial area measurement parameters on the push-out strength between fiber post and dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)