Characterization and impact of the sugarcane borer on sugarcane yield and quality

The sugarcane borer, Diatraea saccharalis (F.) (Lepidoptera: Crambidae), is a key pest of sugarcane (Saccharum spp.). While damage caused by this pest has increased in the past 20 yr, studies investigating the insect-plant interactions are still lacking. Moreover, there is no information about the consequences of borer damage on the parameters of sugar quality. Therefore, two field experiments were performed during the 2010 and 2011 growing seasons in Brazil to compare the raw material and sugar quality of SP80-3280 sugarcane plants with and without the sugarcane borer. Plants were protected within screen cages and infested weekly during the 2010 and 2011 seasons, using egg masses starting at the second and third internode stage. At harvest, 25.77 and 19.01% of the internodes were bored by larvae (infestation intensity, II) in the first and second seasons, respectively. There was no correlation between the borer gallery total volume and II. The fiber content significantly increased with increasing II. The stalk biometric parameters, such as length, diameter, and yield, were not correlated with II. The sucrose yield significantly decreased with increasing II. Consequently, sugar yield losses were estimated at 8.83 and 19.80% per 1% bored internode for the first and second seasons, respectively. The concentration of phenolic compounds increased, and unclarified juice color quality decreased, with increasing II. Significant differences were detected in the quality of the sugar. These results should be confirmed for other sugarcane cultivars and incorporated into an economic injury level to enhance decision-making strategies for borer management. © 2013 by the American Society of Agronomy, 5585 Guilford Road, Madison, WI 53711. All rights reserved.

Interaction between Linepithema micans (Hymenoptera: Formicidae) and Eurhizococcus brasiliensis (Hemiptera: Margarodidae) in vineyards

Eurhizococcus brasiliensis (Wille) (Hemiptera: Margarodidae) is a soil scale that is considered the main pest of vineyards in Brazil. The ant Linepithema micans (Forel) (Hymenoptera: Formicidae) is frequently found associated with this species of scale in infested areas. The effect of the presence of L. micans on the infestation and dispersal capacity of E. brasiliensis on vine roots was measured in a greenhouse, using Paulsen 1103 rootstock seedlings planted in simple and double Gallotti Cages. Treatments measured were: infestation of roots with E. brasiliensis or L. micans, and infestation with both species together. In the experiment using simple Gallotti Cages, with E. brasiliensis associated with L. micans, higher mean numbers of cysts and ants per plant were recorded, a result significantly different from that found for infestation with scale only. When double Gallotti Cages were used, first-instar nymphs were transported between the cages. The results showed that L. micans transports and aids in the attachment of E. brasiliensis to vine plants. © 2013 Entomological Society of America.

Predictive formulas for food base excess and urine pH estimations of cats

Food base excess (BE, mEq/kg) can be calculated from the diet macroelements, together with either the sulfur amino acids methionine and cysteine (BEaa) or total sulfur (BEs) concentrations. The present study compared the use of sulfur or methionine and cysteine for calculating the food BE (experiment 1) and investigated the influence of food BE on blood gas analysis and the urine pH of cats, and proposes a prediction equation to estimate the urine pH of cats fed kibble diets based on the calculated food BE (experiments 2 and 3). In experiment 1, nine healthy, adult cats were used in a change-over design and fed with nine commercial dry cat foods. The cats were housed in metabolism cages over seven days for adaptation and three days for total urine collection. All of the urine produced over 24h was pooled by cat and diet. The cats' acid-base status was assessed through blood gas analysis after 10 days of diet consumption. A mean difference of -115mEq/kg between BEs and BEaa was observed, which could be explained by a greater concentration of sulfur in the whole diet than in methionine and cysteine. Urine pH presented a stronger correlation with food BEs (R2=0.95; P<0.001) than with food BEaa (R2=0.86; P<0.001). Experiment 2 included 30 kibble diets, and each diet was tested in six cats. The food BEs varied between -180 and +307mEq/kg, and the urine pH of the cats varied between 5.60 and 7.74. A significant correlation was found between the measured urine pH and the food BEs (urinary pH=6.269+[0.0036×BEs]+[0.000003×BEs2]; R2=0.91; P<0.001). In experiment 3, eight kibble diets were tested (food BEs between -187mEq/kg and +381mEq/kg) to validate the equation proposed in experiment 2 and to compare the obtained results with previously published formulae. The results of the proposed formula presented a high concordance correlation coefficient (0.942) and high accuracy (0.979) with the measured values, and the estimates of urine pH did not differ from the values obtained in cats (P>0.05). The cats' venous blood pH, bicarbonate, and blood BE were correlated with food BEs (P<0.001); the consumption of diets with low food BEs induced a reduction in these parameters. In conclusion, food macroelement composition has a strong influence on cats' acid-base equilibrium and food BEs calculation is a useful tool to formulate and balance kibble diets for felines. © 2013 Elsevier B.V.

Synthesis and characterization of lead zirconate titanate (PZT) obtained by two chemical methods

Lead zirconate titanate (PZT) was synthesized at the ratio of Zr/Ti=52/48 using two synthesis methods: the polymeric precursor method (PPM) and the microwave-assisted hydrothermal method (MAHM). The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size distribution by sedimentation, hysteresis measurements and photoluminescence (PL). The results showed that PZT powders are composed of tetragonal and rhombohedral phases. Different particle sizes and morphologies were obtained depending upon the synthesis method. From the hysteresis loop verified that PZT powders synthesized by the PPM have a typical loop of ferroelectric material and are more influenced by spatial charges while particles synthesized by the MAHM have a hysteresis loop similar to paraelectric material and are less influenced by spatial charges. Both samples showed PL behavior in the green region (525 nm) whereas the sample synthesized by the PPM showed higher intensity in spectra. © 2013 Elsevier Ltd and Techna Group S.r.l.

Ferroelectric and structural instability of (Pb,Ca)TiO3 thin films prepared in an oxygen atmosphere and deposited on LSCO thin films which act as a buffer layer

Structural, microstructural and ferroelectric properties of Pb0.90Ca0.10TiO3 (PCT10) thin films deposited using La0.50Sr0.50CoO3 (LSCO) thin films which serve only as a buffer layer were compared with properties of the thin films grown using a platinum-coated silicon substrate. LSCO and PCT10 thin films were grown using the chemical solution deposition method and heat-treated in an oxygen atmosphere at 700 °C and 650 °C in a tube oven, respectively. X-ray diffraction (XRD) and Raman spectroscopy results showed that PCT10 thin films deposited directly on a platinum-coated silicon substrate exhibit a strong tetragonal character while thin films with the LSCO buffer layer displayed a smaller tetragonal character. Surface morphology observations by atomic force microscopy (AFM) revealed that PCT10 thin films with a LSCO buffer layer had a smoother surface and smaller grain size compared with thin films grown on a platinum-coated silicon substrate. Additionally, the capacitance versus voltage curves and hysteresis loop measurement indicated that the degree of polarization decreased for PCT10 thin films on a LSCO buffer layer compared with PCT10 thin films deposited directly on a platinum-coated silicon substrate. This phenomenon can be described as the smaller shift off-center of Ti atoms along the c-direction 〈001〉 inside the TiO6 octahedron unit due to the reduction of lattice parameters. Remnant polarization (P r ) values are about 30 μC/cm2 and 12 μC/cm2 for PCT10/Pt and PCT10/LSCO thin films, respectively. Results showed that the LSCO buffer layer strongly influenced the structural, microstructural and ferroelectric properties of PCT10 thin films. © 2013 Elsevier Ltd and Techna Group S.r.l.

Rietveld refinement, morphology and optical properties of (Ba 1-xSrx)MoO4 crystals

In this article, the structural refinement, morphology and optical properties of barium strontium molybdate [(Ba1-x Sr x )MoO4 with x = 0, 0.25, 0.50, 0.75 and 1] crystals, synthesized by the co-precipitation (drop-by-drop) method, are reported. The crystals obtained were structurally characterized by X-ray diffraction (XRD), Rietveld refinement, and Fourier transform-Raman (FT-Raman) and Fourier transform-infrared (FT-IR) spectroscopies. The shapes of the crystals were observed by means of field-emission scanning electron microscopy (FE-SEM). The optical properties were investigated using ultraviolet-visible (UV-Vis) absorption spectroscopy and photoluminescence (PL) measurements. XRD patterns, Rietveld refinement, and FT-Raman and FT-IR spectra showed that all of the crystals are monophasic with a scheelite-type tetragonal structure. The refined lattice parameters and atomic positions were employed to model the [BaO8], [SrO8] and [MoO4] clusters in the tetragonal lattices. The FE-SEM images indicate that increased x content produces a decrease in the crystal size and modifications in the crystal shape. UV-Vis spectra indicated a decrease in the optical band gap with an increase in x in the (Ba1-x Sr x )MoO4 crystals. Finally, a decrease in the intensity of PL emission is apparent with an increase in x up to 0.75 in the (Ba1-x Sr x )MoO4 crystal lattice when excited by a wavelength of 350nm, probably associated with the degree of structural order-disorder. © 2013 International Union of Crystallography Printed in Singapore - all rights reserved.

Stocking density of Nile tilapia in cages placed in a hydroelectric reservoir

The Brazilian government has been encouraging fish farming in cages in federal water bodies, including hydroelectric reservoirs. Despite the government support, it is a new activity and the production model still needs some adjustment to reduce the production costs and achieve sustainability. The aims of this study were to determine the appropriate stocking density of Nile tilapia in cages in a hydroelectric reservoir and to evaluate to what extent fish size selection could improve their uniformity. Twelve cages (6m3) were placed at the Fish Farmers' Cooperative of Santa Fé do Sul and Region, Ilha Solteira reservoir, São Paulo, Brazil (20°12'10″S, 50°58'31.15″W). In stage I (initial fish weight, 78g), four stocking densities were tested: D1-800, D2-2000, D3-2500 and D4-3000 fish/cage, with three replicates. At the end of this stage (average fish weight, 255g), the fish were selected into three sizes, except for D1. In stage II, four stocking densities were tested, designed to obtain the following final production: D1-100kg/m3 (800 non-selected fish/cage), D2-80kg/m3 (600 fish/cage), D3-100kg/m3 (800 fish/cage) and D4-120kg/m3 (900 fish/cage). The trial ended when the fish weighed 800g. By reducing the initial stocking density from 2500 to 800 tilapia juveniles per cage, there was no need for selection. The growth performance was higher, the feed conversion rate was better and the time taken to reach harvesting was shorter. Consequently, the production cost reduced and the operating profit increased. Using the lowest initial stocking density, the risk of disease outbreak was also lower, and there was no need to use drugs for disease control since the mortality rate and occurrences of disease and deformity decreased and the dissolved oxygen level inside the cages was higher. © 2013 Elsevier B.V.

Structure, characterization and near-infrared emission of a novel 6-connected uninodal 3D network of Nd(III) containing 2,5-thiophenedicarboxylate anion

The novel coordination polymer with the formula {[Nd2(2,5-tdc)3(dmf)2(H2O)2].dmf.H2O}n (2,5-tdc2-=2,5-thiophedicarboxylate anion and dmf=dimethylformamide) has been synthesized and characterized by thermal analysis (TG/DTA), vibrational spectroscopy (FTIR) and single crystal X-ray diffraction analysis (XRD). Structure analysis reveals that Nd(III) ions show dicapped trigonal prism coordination geometry. The 2,5-tdc2- ligands connect four Nd(III) centers, adopting (κ1 - κ1) - (κ1 - κ1) - μ4 coordination mode, generating an interesting 6-connected uninodal 3D network. Photophysical properties were studied using diffuse reflectance spectroscopy (DR) and excitation/emission spectra. The photoluminescence data show the near infrared emission (NIR) with the characteristic 4F3/2→4IJ (J=9/2, 11/2 and 13/2) transitions of Nd(III) ion, indicating that 2,5-tdc2- is able to act as a sensitizer for emission in NIR region. © 2013 Elsevier B.V.

Caracterização dielétrica de partículas nanométricas e nanoestruturadas de óxido de niobato da família tetragonal tungstênio bronze com estequiometria K'Sr IND. 2' N'b IND. 5' 'O IND. 15'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de diferentes tratamentos de superfície em uma cerâmica policristalina de zircônia tetragonal (ytzp), na resistência de união com cimento resinoso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Filmes de SiOx crescidos em substrato de zircônia tetragonal policristalina estabilizada por ítria: influência na durabilidade da adesão a cimentos resinosos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de diferentes protocolos de jateamento na resistência à flexão e na estabilidade estrutural de uma cerâmica policristalina de zircônia tetragonal parcialmente estabilizada com ítria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do tratamento de superfície na resistência à flexão e na transformação de fase de zircônia tetragonal policristalina estabilizada por óxido de ítrio (y-tzp)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

First-Principles Study of Pressure-Induced Phase Transitions and Electronic Properties of Ag2MoO4

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural refinement, optical and electrical properties of [Ba1-x Sm-2x/3](Zr0.05Ti0.95)O-3 ceramics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)