Verificação da dureza de gessos em função da compatibilidade com materiais de moldagem à base de borracha

Currently the most widespread material used in dies is gypsum that together with its simple technique has very satisfactory mechanical, chemical and physical properties. However, its compactibility with the impression materials can compromise the die surface quality. In our work, we studies the hardness of the two gypsum types: Type III (die stone) and type IV (improved die stone), as well as the influence of the contact with three types of impression materials: polymerized silicone for condensation (Xantopren), polysulfide (Permlastic) and polymerized silicone by addition (Provil). As comparison parameter gypsum was used in contact with a glass surface…(Complete abstract click electronic access below)

Desenvolvimento e caracterização de sistemas líquido-cristalinos para aplicação tópica de metotrexato: estudos de liberação, retenção e permeação in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise ergonômica de instrumentos líticos pré-históricos brasileiros: uma contribuição para a história da ergonomia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of Different Surface Treatments on Bond Strength of Resin Composite Using the Intrinsic Characterization Technique

Objective: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM).Materials and Methods: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests.Results: ANOVA presented a value of p<0.05. The mean values (+/- SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (+/- 5.88)a; Group PA, 23.46 MPa (+/- 5.45)b; Group RD, 21.39 MPa (+/- 6.36)b; Group AO, 15.05 MPa (+/- 4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups.Conclusion: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.

A Catuama e o bilobalide na regeneração nervosa periférica de ratos submetidos à secção do nervo isquiático

The Catuama((R)) is composed of four Brazilian plants extracts (Paullinia cupana, Trichilia catigua, Ptychopetalum olacoides e Zingiber officinale). The Catuama((R)) is known as having neuroprotector, anti-inflammatory, antioxidant and antidepressant effects. Bilobalide, extracted from leaves of Ginkgo biloba, is known by its neuroprotective effect in the central and peripheral nervous systems. The present study evaluates the effect of Catuama((R)) and bilobalide on peripheral nerve regeneration in rats following a sciatic nerve section. Sciatic nerve of forty adult rats was transected with a 10-mm gap and the proximal and distal nerve stumps were fixed in a silicone tube filled with liquid collagen. The animals were divided into four groups: the control group (A), two groups treated with Catuama((R)) by gavage along 28 days after the surgery in different doses of 100 (B) and 400mg. kg(-1) (C) and the group using 200 mu M bilobalide (D) associated with the liquid collagen in the silicone tube. Evaluations were done by a walk test on the first, fifth and tenth week after the surgery. Electrophysiological stimulation and quantitative and qualitative histological analyses of the sciatic nerve and gastrocnemius muscle were also performed on the tenth week after the surgery. All groups showed good regeneration but no statistical difference was found between treatments and control groups (P > 0.05).

Implant-retained finger prosthesis with modified retention system

Background: Amputations affect both the physical and the psychological aspects of an individual, causing significant impact on self-esteem. The main causes of finger amputations are work-related accidents with dangerous machinery, road traffic accidents, and animal bites, as well as systemic diseases such as diabetes. This report aims to describe a simple technique for fabrication of implant-retained finger prosthesis with a modified base of the retention system.Case Description and Methods: The O-Ring retention system was used with a modified hexagon-shaped base and a metallic capsule adapted to the acrylic resin to attach the prosthesis to the implant.Findings and Outcomes: The prosthesis was made with silicone, and after osseointegration, it was installed without complications, leading to a patient satisfied with the end result and encouraged to return to social life.

Avaliação da rugosidade superficial de restaurações estéticas e do esmalte adjacente após o uso de diferentes instrumentos rotatórios de acabamento e polimento

Pós-graduação em Odontologia - ICT

Evaluation of tensile tetention of Y-TZP crowns after long-term aging: Effect of the core substrate and crown surface conditioning

This study evaluated the effect of the core substrate type (dentin and composite resin) on the retention of crowns made of yttrium oxide stabilized tetragonal zirconia polycrystal (Y-TZP), submitted to three inner surface conditionings. For this purpose, 72 freshly extracted molars were embedded in acrylic resin, perpendicular to the long axis, and prepared for full crowns: 36 specimens had crown preparations in dentin; the remaining 36 teeth had the crowns removed, and crown preparations were reconstructed with composite resin plus fiber posts with dimensions identical to the prepared dentin. The preparations were impressed using addition silicone, and 72 Y-TZP copings for the tensile test were produced. Cementation was performed with a dual-cured cement containing phosphate monomers. For cementation, the crown preparation (dentin or resin) was conditioned with the adhesive system, and the ceramic was subjected to one of three surface treatments: isopropyl alcohol, tribochemical silica coating, or thin low-fusing glassy porcelain layer application plus silanization. After 24 hours, all specimens were submitted to thermocycling (6000 cycles) and placed in a special tensile testing device in a universal testing machine to determine failure loads. The failure modes of all samples were analyzed under a stereomicroscope. Two-way analysis of variance showed that the surface treatment and substrate type (alpha=0.05) affected the tensile retention results. The dentin substrate presented the highest tensile retention values, regardless of the surface treatment. When the substrate was resin, the tribochemical silica coating and low-fusing glaze application plus silanization groups showed the higher retention values.

Two-stage rumenostomy in buffaloes

Background: Rumenostomy may be performed for therapeutic and digestibility research purposes in bovines, small ruminants and camelids. Several studies requires romenostomy in buffaloes in order to sample ruminal content for laboratorial assays. However, complications and outcome of rumenostomy was poorly studied in buffaloes. Therefore, the aim of the current study was to describe a two-stage rumenostomy technique in buffaloes, focused on intra and post-operative period.Materials, Methods & Results: Nine Murrah buffaloes were submitted to a 36-h and 12-h of food and water fastening. The animals were given acepromazine and maintained in standing position. Flank local anesthesia was carried out. A circular skin incision was carried out in the center of the left flank, followed by divulsion of the external and internal obliques and transversus abdominus muscles, and incision of the peritoneum. Subsequently, a segment of the dorsal aspect of the rumen was grasped and pulled through the flank incision. The rumen was attached to the peritoneum and skin incision margins in four points (dorsal, ventral, cranial and caudal). Additional simple interrupted sutures attaching the rumen serosa to the skin were applied subsequently. Four additional interrupted horizontal mattress sutures were applied equidistantly, taking bites only in the skin and rumen serosa. Following 12 h, the second stage was carried out. The buffaloes were prepared and restrained as performed for the first stage. A circular flap was excised from the exteriorized rumen and the silicone romenostomy cannula was placed. Clinical parameters, postoperative recovery, weight and behavioral pain scale were assessed. Positioning and anesthesia regimen were adequate for the achievement of the procedure. However, two animals fell in the restraint chute during the first surgical stage. Mild ischemia of the exteriorized rumen segment was observed on the second surgical stage, which resulted in less hemorrhage and enhanced cannula positioning. Complete cicatrization and permanent adhesion of the rumen to the skin were achieved. No ruminal leakage to the abdominal cavity occurred. No signs of pain were reported. There were few cases of laxity of the romenostomy opening leading to drop of cannula, myiasis on the margin of the stoma site and few cases of mild ruminal content leakage on the long-term assessment.Discussion: Restraint in standing position was considered adequate, although lateral recumbence constitutes another option. However, higher risk of contamination and technical difficulties in placing the cannulas are expected if lateral recumbence is considered. In other trials using acepromazine, no accidental recumbence occurred. Xylazine was also indicated for chemical restraint of buffaloes. It is known that flexible cannulas provide better anatomic adjustment and adaptation as well as being effective for sampling ruminal content, as seen in the current study. Ruminal leakage is one of the most frequent complications of romenostomy, which may affect animal's welfare. The animals in the current study presented no variations on the body score, even though on those presenting cannula loosening or ruminal content leakage. Moreover, no significant changes of the ruminal content parameters were noticed. Myiasis was also reported following ruminal surgical interventions, which were mainly attributed to extensive breeding. Loss of the cannula, subcutaneous emphysema and suture dehiscence are common complications of romenostomy. Nonetheless, none of those complications were found on the current study. Thus, romenostomy was feasible and efficient for sampling and performing assays of the ruminal content in buffaloes.

Estudo das características térmicas e mecânicas de formulações de adesivos PSA HOT MELT contendo variações de borrachas SBC e resinas taquificantes

The properties of the hot melt adhesive pressure sensitive (HMPSA) using an elastomer as a base polymer a copolymer of styrene and butadiene (SBS) and variation of tackifiers resins such as hydrocarbon resins and hydrogenated hydrocarbon were investigated. The formulations were prepared by mixing process within shear. The adhesives prepared were evaluated in test Brookfield viscosity and softening point Ring and Ball to compare the formulations and the influence of variations in raw materials. Infrared analyzes were performed to detect the reactions between the inputs and investigate the chemical interactions of the same properties of the adhesive. In thermal analysis, the assay was performed thermogravimetry (TG) and diferencial exploratory calorimetry (DSC). Were investigated the parameters of the tensile test on each of the formulations. Finally, were analysed comparatively the basic formulations of adhesives with their respective raw materials

Avaliação do potencial de sistemas nanoestruturados estabilizados com poliéter funcional siloxano para administração tópica de metotrexato

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação de substratos de carbeto de silício para fins aeroespaciais

This conclusion thesis has the objective of produce substrates of Silicon Carbide from the powder of SiC for aerospace use. The powder of SiC was pressed in cylindrical form by the process called “wet way”. For the inicial pressing process was used a uniaxial squeezer and after that was used a isostatic squeezer, after that the samples were synthesized. The next step was the machining and polishing to improve the features of the surface of the sample. Then the roughness was measured, as also the Arquimedes method and optical microscopy and scanning eletron microscopy. Some innovations were done, in one of the lots little vacancys were done with organic material or silicon to reduce the weight of the sample; and the other innovation were the use of a slip film of SiC on the surface of the sample, that were after synthesized with LASER to reduce the roughness, in this samples the roughness were reduce in 50 % if compared with the other samples

Avaliação da permeação cutânea do acetato de dexametasona incorporado em sistemas nanoestruturados

O acetato de dexametasona (DXM) é um glicocorticoide com eficácia antiinflamatória e imunossupressora, sendo utilizado nas doenças autoimunes. Sua ação antiinflamatória advém da inibição do acúmulo de células (macrófagos, linfócitos e neutrófilos) na área da inflamação, inibindo também a liberação de mediadores da inflamação como interferon-γ e TNF-α. Já a atividade imunossupressora é alcançada com a redução do concentrado de linfócitos e inibição da síntese e/ou liberação de interleucinas. Porém o uso contínuo do DXM ocasiona uma série de efeitos colaterais sistêmicos, sendo interessante sua aplicação tópica para viabilizar a promoção do aumento da liberação e a estabilização dos níveis plasmáticos do fármaco. Sistemas nanoestruturados como microemulsões (ME) e os cristais líquidos (CL) vêm sendo estudados como novos sistemas de liberação, pois além de se comportarem como reservatórios de fármacos também possibilitam o aumento da estabilidade e da solubilidade dos princípios ativos. Os objetivos deste trabalho foram desenvolver e caracterizar sistemas micro e nanoestruturados, com intuito de incorporar DXM e avaliar sua permeação cutânea in vitro. Foram desenvolvidos sistemas utilizando água, silicone (DC® 193C fluido) e polioxietileno-20-oleil éter (Brij® 98). Os 36 pontos do diagrama de fases foram avaliados, sendo elaboradas formulações com diferentes proporções de água, óleo e tensoativo, sendo possível delimitar regiões como: sistemas transparentes de alta viscosidade (STAV), sistemas transparentes de baixa viscosidade (STBV), sistemas líquido-transparentes (SLT), emulsão viscosa (EV) e emulsão líquida (EL). Três formulações foram selecionadas para os ensaios de caracterização, fixando-se a concentração de tensoativo (T) em 40% e variando-se as concentrações de água e de silicone, denominadas A, B e C. As análises de microscopia de luz polarizada ...

Desenvolvimento e caracterização de sistemas líquido cristalinos para incorporação de p-metoxicinamato de octila

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incorporação do trans-resveratrol em sistemas nanoestruturados: avaliação das ações antioxidante e despigmentante in vitro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)