Painéis aglomerados fabricados com mistura de partículas de madeiras tropicais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimizing row spacing and plant population arrangement for a new short-height castor genotype in fall-winter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Outbreaks of Chrysodeixis includens (Walker) (Lepidoptera: Noctuidae) in common bean and castor bean in São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficiência de detergentes e EDTA na remoção da smear layer de superfícies radiculares submetidas a raspagem e aplainamento: análise através da microscopia eletrônica de varredura

A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.

Adsorção do corante luganil azul por espuma de poliuretano

The industrial development has created many environmental problems that can be observed through the changes in air, soil and water. The pollution of water bodies with compounds present in textile effluents cause beyond the visual pollution, changes in biological cycles, mainly by changing the process of photosynthesis. Due to these environmental implications it is necessary a treatment of livestock manure. The process of adsorption of the dye is a technique that has been successfully employed for effective removal of the color of the effluent. The purpose of this study was to investigate the application of a polyurethane foam plant of castor oil as an alternative adsorbent for removal of dyes in textile effluents. The study was conducted with the dye “luganil azul”, as adsorbent and the foam in a flexible manner and sprayed. It also investigated the influence of pH on the adsorption dye. The kinetic data were obtained, noting that the pH influence on adsorption. Adsorption isotherms of the dye in aqueous solution using the foam in a flexible manner also were determined experimentally.

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Biodegradação de óleos derivados do petróleo e de origem vegetal estimulada por biossurfactantes em meio aquoso e monitoramento de sua toxicidade

Não disponível

Caracterização física e mecânica de compensado produzido com dois diferentes adesivos em duas variações de pressão de prensagem

The adhesives used in the production of engineered boards have been object of study over the years in order to improve the properties of the boards with less energy consumption, lower production costs and reduced environmental impact. In addition to that, process variables may affect the properties of the board. The present study aimed to characterize sheets of plywood, manufactured with two types of adhesives, under two different pressing conditions. The adhesives used for the study were Phenol-formaldehyde and Polyurethane castor oil based. The pressure of pressing was varied in a range from 75 to 160 Bar, in order to verify how they influence the physical and mechanical properties of the board. The tests performed resulted in a conclusion that shows that the moister content of the veneers interferes on the physical and mechanical tests. In general, boards produced with polyurethane resin showed superior physical and mechanical results; although the ones produced with phenol formaldehyde at a pressure of 75 Bar had always equal or higher values, compared to what is found in literature

Desenvolvimento e controle de qualidade físico e microbiológico de emulsão O/A contendo óleo essencial de Melaleuca alternifolia

Sabe-se que na atualidade, é grande a preocupação da comunidade científica mundial, em relação à resistência microbiana frente às substâncias convencionais, utilizadas indiscriminadamente, por isso, é crescente a motivação da pesquisa básica na bioprospecção de novas substâncias, que apresentem atividade antimicrobiana e antifúngica e que possam ser uma alternativa segura e eficaz contra esses microorganismos no tratamento das doenças causadas por eles. As dermatofitoses, por exemplo, são processos infecciosos de pele, pêlo e unhas que acometem muitas pessoas, de todas as faixas etárias, no mundo todo, provocando as chamadas tinhas ou tineas, denominadas corporis, pedis, cruris, capitis, unguium(onicomicose) e outras (dependendo o local do corpo onde estão), causadas pelo dermatófito filamentoso, Trichophyton rubrum. Estudos envolvendo este patógeno são cada vez mais importantes, devido ao aparecimento de linhagens resistentes aos medicamentos antifúngicos disponíveis no mercado, e ao comportamento invasivo deste agente em pacientes com o sistema imune comprometido. Porém, somente a descoberta de novas drogas não é suficiente, é preciso desenvolver produtos eficazes e seguros, que possam veicular essas substâncias sem causar prejuízo ao paciente. Sendo assim, a proposta desse trabalho é desenvolver uma emulsão A/O, contendo óleo essencial de Melaleuca alternifolia (TTO), verificar sua estabilidade preliminar e caracterizá-la realizando o estudo reológico da formulação, determinar a concentração inibitória mínima (CIM) e a concentração fungicida mínima (CFM) do TTO e averiguar a atividade antifúngica in vitro da emulsão frente ao T. rubrum, agente patogênico ao qual se destina o uso do produto

Atualizações sobre o uso de óleo de peixe no tratamento de cardiopatia canina

There are cardiopathies that acometem the dogs, being able this being congenital or acquired and lately have grown the number of cases due to the increase of the life expectancy of these animals becoming each time more necessary prevention methods. In recent years innumerable research is being carried through to understand the influence of the fish oil in the cardiopathies. The fish oil ingestion, Omega 3, has shown beneficial effect in the prevention of cardiovascular illnesses in such a way in the men as in the animals. Such effect this related to the presence of acid greasy polyunsaturateds n-3, mainly acid the eicosapentaenóico (EPA) and acid the docosahexaenóico (DHA). These substances can be found in foods as marine cold water fish (salmon, tuna, sardine and Trout), hemp seeds and soy. The present study, therefore, it has as objective to carry through an update on the use of the fish oil in the treatment of cardiopathies in dogs

Avaliação reológica do óleo de abacate (Persea americana mill) e estudo da estabilidade sob condições de aquecimento e armazenamento à temperatura ambiente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Revisão: propriedades físico-químicas do biodiesel

The present literature review aimed to describe biodisel’s physicochemical properties obtained from different raw materials. Were studied data concerning viscosity, density, cetane number, fl ash point, pour point and calorifi c power of biodiesel produced from soybean oil, coconut, rice bran, cotton, pequi, babassu, mamona, palm, castor, sunfl ower, corn, canola, jatropha and karanja. Considering the diversity of vegetal and animal sources that can be used on the biodiesel production, it is noteworthy the lack of data concerning physicochemical properties of unexplored raw materials. This work may contribute for the creation of database about physicochemical properties of oil and biodiesel from different sources which will allow design and scale-up, both the necessary equipment to the production line and reciprocating engines.

Antioxidant effect of thyme ( -L.) and oregano ( -L.) extracts in soybean oil under thermoxidation

The rancidity of vegetable oils is considered one problem in the food industry,thus, are added antioxidants in food. The objective of this study was to investigatethe antioxidant effect of oregano and thyme extracts in soybean oil underthermoxidation. Soybean oil containing 3,000 mg/kg of oregano and thyme oleo-resins and the mixture of both, as well as soybean oil containing tert-butylhydroquinone (TBHQ; 50 mg/kg) and soybean oil free of were subjected tothermoxidation. Then, the physicochemical properties and fatty acid profile wereevaluated. Oregano and thyme oleoresins applied separately presented a higherprotective effect, inhibiting a greater formation of polar compounds than the anti-oxidant TBHQ, indicating that the addition of 3,000 mg/kg has ensured a betteroxidative protection than the synthetic antioxidant. The increase in the concentra-tion of oleoresins by mixing thyme and oregano extracts has given a higher pro-tective effect.

Confecção e avaliação de chapas de madeira aglomerada com aproveitamento de resíduos de marcenaria industrial

Pós-graduação em Engenharia Civil - FEIS

Híbridos de mamoneira (Ricinus communis L.) obtidos por meio da hibridação convencional e do método de híbridos crípticos

Pós-graduação em Agronomia (Agricultura) - FCA