Estudo de métodos para anotação linguística e extração de conceitos na aquisição de ontologias a partir de textos

Não disponível

Classificação hidroquímica das águas subterrâneas do Aquífero Serra Geral na porção centro norte do estado de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Extração de isosuperfícies a partir de dados meteorológicos

This work aims viewing weather information, by building isosurfaces enabling enjoy the advantages of three-dimensional geometric models, to communicate the meaning of the data used in a clear and efficient way. The evolving technology of data processing makes possible the interpretation of masses of data increasing, through robust algorithms. In meteorology, in particular, we can benefit from this fact, due to the large amount of data required for analysis and statistics. The manipulation of data, by users from other areas, is facilitated by the choice of algorithm and the tools involved in this work. The project was further developed into distinct modules, increasing their flexibility and reusability for future studies

Desenvolvimento de métodos analíticos para determinação de fósforo e selênio em amostras biológicas

A determinação de fósforo em amostras de rações e fezes de peixes por espectrometria no visível e de selênio em amostras vegetais de cultura orgânica por espectrometria de absorção atômica em forno de grafite (GFAAS) representa o foco principal do trabalho desenvolvido. O fósforo e o selênio são macro e micronutrientes importantes para a nutrição vegetal e animal, no entanto, se utilizados sem um controle adequado podem poluir o solo e os recursos hídricos, atingindo todo o meio ambiente. Dessa forma, foram desenvolvidos métodos para extração dos analitos que diminuíram significativamente os resíduos químicos produzidos nas determinações de rotina feitas na área de nutrição de plantas e de piscicultura. No caso do fósforo foram otimizados parâmetros físico-químicos para extração desse elemento por ultra-som e posterior quantificação por espectrofotometria no visível. No caso do selênio foram otimizados parâmetros físico-químicos para amostragem em suspensão (slurry) e determinação direta por GFAAS. Os principais parâmetros físico-químicos avaliados e otimizados foram: granulometria da amostra sólida, tempo e potência de sonificação, soluções extratoras, agentes surfactantes para estabilização do slurry; temperatura de pirólise e atomização, tipos de modificadores químicos e volume de amostragem nas determinações de selênio por GFAAS e tempo de reação e relação ao agente cromogênico/volume de amostra nas determinações espectrofotométricas de fósforo. O método de extração por ultra-som foi aplicado na determinação de fósforo biodisponível em amostras de rações de peixes e o método de amostragem em suspensão para a determinação de selênio em amostras de vegetais orgânicos

Otimização de um método cromatográfico de análise de pesticidas organoclorados em amostras de peixes

Considering that persistent organic pollutants (POPs) including synthetic substances belonging to differents organic functions, including organochlorine pesticides (OCPs), which are the most persistent and bioaccumulative, with high toxicity to humans and animals. Accordingly environmental and biological monitoring is necessary, in order to have greater control regarding the irresponsible use of these products. Though there are several analytical methodology reported in the literature to make determinations of this pesticide, they present some difficulties, requiring several steps to make the clean up of the sample. The proposed project aims to optimize a new analytical method that allows to perform the extraction of organochlorine pesticides in fish tissues, employing acetone as solvent assisted by ultrasound bath, making the method more quickly and not requiringfurther steps to purify the sample. Were analyzed the recoveries of pesticides in study in samples of tilapia average values: Heptachlor=84,7±9,8%; Aldrin=87,3±3,5%; Endosulfan=101,4±18,6%; DDE= 90,5± 3,3%, Endrin=102,2±13,8%., DDD=92,1±19,9%; DDT=90,8±6,8%. The real samples showed values granted for our legislation and low values of error

Estudo da tecnologia e processos de extração em poços de petróleo

The analysis of the extraction process in oil wells is presented exploring the challenges to the effectiveness of the procedure is shown step by step in the process. There is an analysis of the major tools and equipment needed in the drilling process, promoting the understanding of the challenges in the pre-salt layers, compared to conventional processes. The work is reinforced through studies of the influence of the corrosive compared not corrosive environment in drill strings

Eficiência das resinas XAD4 e C18 na extração de compostos mutagênicos presentes em efluente de refinaria de petróleo para a realização do Teste de Ames

Não disponível

Microalgas na Produção de Biodiesel: Extração e Composição Lipídica

The uninterrupted rise in emission of greenhouse gases open way to the use of biofuels, due to politics that focus on fuel safe, clean and renewable. The use of microalgae for biodiesel production has been described as one of the most promising sources of biomass for biofuels. The aim of this study was to evaluate the extraction and lipid profile of the microalgae Dunaliella tertiolecta, Isochrysis galbana and Tetraselsim gracilis. The extractions were performed with solvents chloroform /methanol and petroleum ether. The lipid profile was analyzed by gas chromatography after transesterification.The petroleum ether showed more efficiency in the extraction, the best result obtained was in the microalgae D. tertiolecta with 19.52% of lipid. The lipid profile analysis indicated a biodiesel stable to oxidation and elevated viscosity

Influência do porta-enxerto, da configuração de extração e do período de maturação no teor de limonina e na aceitação sensorial do suco de laranja Pêra-Rio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Inserção e extração de marca d'água em imagens digitais usando a transformada wavelet

Pós-graduação em Engenharia Elétrica - FEIS

Aplicação da membrana de látex natural (NRL) como suporte para cultura das células osteogênicas MC3T3-E1 para regeneração óssea guiada (GBR)

Pós-graduação em Biotecnologia - IQ

Análise química de elementos potencialmente tóxicos em baterias e pilhas por FAAS e ICP OES

Pós-graduação em Ciência dos Materiais - FEIS

Pré-tratamento do bagaço de cana-de-açúcar, hidrólise e sua caracterização química e estrutural, visando a produção de etanol de segunda geração

Pós-graduação em Biotecnologia - IQ