207 resultados para Estimativa de parâmetro


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Lianas play a key role in many tropical forests ecosystems, contributing to community abundance, diversity and structure. Techniques to census lianas and estimate biomass have been used mainly in tropical forests. The aim of this study was to verify if different measurement location on the stem and inclusion criteria influence the estimations of liana abundance and biomass in Cerrado. The study was carried out at Itirapina fragment (ca 260 ha) located in Sao Paulo, Southeast Brazil. We measured all apparent ramets of rooted lianas by using different inclusion criteria: >= 0.5 cm in diameter at 30 cm basal area (D_30), and at 130 cm diameter breast height (DBH), in 36 transects (10 x 25 m). We compared the biomass using the allometric equation based on data from tropical florest take at 130 cm (DBH) and other The allometric biomass equation development to estimate the aboveground biomass of live lianas in tropical forests (DAP = 130 cm) was used. We tested the liana biomass, based on measurements taken at (D_30) using two different conversion equations. The results did not show significant differences in liana abundance and above ground biomass estimated applying the different criteria of inclusion However the biomass estimated from data collected at D_30 and converted into DAP showed a tendency to increase in biomass. Our findings suggest that the protocol used to the census of liana and the allometric biomass equation proposed to forests can be applied in the Cerrado.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Currently new techniques for data processing, such as neural networks, fuzzy logic and hybrid systems are used to develop predictive models of complex systems and to estimate the desired parameters. In this article the use of an adaptive neuro fuzzy inference system was investigated to estimate the productivity of wheat, using a database of combination of the following treatments: five N doses (0, 50, 100, 150 and 200 kg ha(-1)), three sources (Entec, ammonium sulfate and urea), two application times of N (at sowing or at side-dressing) and two wheat cultivars (IAC 370 and E21), that were evaluated during two years in Selviria, Mato Grosso do Sul, Brazil. Through the input and output data, the system of adaptive neuro fuzzy inference learns, and then can estimate a new value of wheat yield with different N doses. The productivity prediciton error of wheat in function of five N doses, using a neuro fuzzy system, was smaller than that one obtained with a quadratic approximation. The results show that the neuro fuzzy system is a viable prediction model for estimating the wheat yield in function of N doses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aims of this study was evaluated the efficiency of nitrogen sufficiency index (NSI) calculated with base on the measures relative chlorophyll index (RCI) leaves, measured with portable chlorophyll meter, as an indicator of time of sidedressing N fertilization and verify which value of NSI (90% and 95%) is the most appropriate to indicate the moment of N fertilization on common bean cultivar IAC Alvorada. An experiment with five N managements (M1: 200 kg ha(-1) N (40 kg at sowing + 80 kg at 15 days after emergency (DAE) + 80 kg 30 DAE); M2: 100 kg ha(-1) N (20 kg at sowing + 40 kg at 15 DAE + 40 kg at 30 DAE); M3: 20 kg ha(-1) N at sowing + 30 kg ha(-1) when chlorophyll meter readings indicated NSI < 95%; M4: 20 kg ha(-1) N at sowing + 30 kg N ha(-1) N when chlorophyll meter readings indicated NSI <90% and, M5: control (without N application)) and four replications was carried out in the rainy and dry growing seasons of the agricultural year 2009/10, in Botucatu, Sao Paulo State, Brazil. The variables RCI, aboveground dry matter, leaf N concentration, yield components, grain yield, and N use efficiency were evaluated. The NSI of 90%, calculated based on monitoring of RCI in common bean leaves with chlorophyll meter, was more effective than 95% to define need for N sidedressing in common bean cultivar IAC Alvorada, reducing the N application and improving the use efficiency of applied N.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The platelet blood count in laboratorial routine provides to the clinician important information about the hemostasis of the patient. There are many techniques described, however the gold standard techniques realized in hemocytometer spent a lot of time, making this technique impracticable in great routines. This research had the intent to evaluate if the automatic veterinary blood counter QBC Vet Autoread (R), whose results get five minutes to be ready, is capable to offer a trustworthy platelet count number. To this end, were evaluated the correlations among three different forms of platelets count in dogs: count in automatic blood counter QBC Vet Autoread (R), estimative in blood smear and the gold standard method by manual count in hemocytometer. The viability and confidence use of automatic blood counters of the medicine veterinary routine. Seventeen dogs were chosen randomly way, in the medical and surgical routine of HOVET-USP. The analysis revel high correlation between the hemocytometer and the estimative in blood smear (r=0,875) and between the hemocytometer and automatic blood count by QBC Vet Autoread (R) (r=0,939). Conclude that the platelet blood cont by QBC Vet Autoread (R), in addition to be fast, it's more truthful when compared with estimative in blood smear, although the latter one also had elevated correlation. However, morphological analysis through the smears cannot be dismissed because none of the other two techniques evaluated have the ability to assess platelet morphological changes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Increased demand for energy and the search for alternative energy sources are remarkable and current facts. The management of domestic solid waste is also part of the issue in view of the possibility of power generation in existing landfills, which could provide financial autonomy to the system of waste management and improve the environmental balance of landfills in Brazil, currently only used for final solids disposal. Landfill gas is a viable alternative energy source has been tested in landfills in the World and in Brazil. Thus, the research aimed to evaluate the percentage of methane (CH4) present in three sinks of gases from a landfill in the municipality of Rio Claro – SP (Brazil), and to estimate the potential methane generation over its life through the application of a mathematical model. As a result it was found that in general the percentage of methane present in the gases is significant, between 50 and 62%. It was also noted that waste with disposal time between 8 and 12 months already are in the methanogenic stage. Finally, there was a tendency to increase the generation of methane in the transition periods of rain and drought

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The genus Brachycephalus is endemic to the Atlantic rainforest and is distributed mainly in the southeastern and southern Brazil. Currently, it has 17 recognized species, most of them, associated with mountainous habitats along the Serra do Mar and Serra da Mantiqueira ridges. Here we use an ecological niche modelling approach based on climatic variables, to assess the potential niche of the mountainous species of this genus. The model generated was then projected to future scenarios considering the last IPCC report, in order to estimate the impacts of climate changes on these species distribution. Results show a decrease in the total suitable area for the mountainous Brachycephalus species, as well as tendencies already observed for other organisms, such as, pole and upward migrations. A southern area on Planalto de Paranapiacaba increases in suitability for these species. We suggest special efforts on new surveys and conservation on the northern part of their distribution, once this seems to be the region more affected by climate changes on the projected scenarios

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The wide territorial extension of Brazil derails the installation and maintenance of instruments for measuring solar radiation, which makes necessary the development and application of models that are able to estimate reliable and sufficient data for many different activities that use such data. And these, in most cases, are estimated from the Ångström equation. Based on this model, this project aimed to estimate the global solar radiation at Presidente Prudente-SP, Brazil, using daily data from 1999 to 2007. The solar radiation data have been extracted from the paper tapes of actinograph bi-metallic (Robitsch) daily records at the meteorological station in the Faculty of Science and Technology, UNESP. These tapes were scanned, resulting in digital images with x and y coordinates pairs (x = time; y = solar radiation, cal/min.cm²). The daily global solar radiation is the area under the curve of the image. This value has been calculated by computer algorithms. After the acquisition and calculation of the values needed to develop the Ångström equation have been determined the constants a and b, using linear regression between the values of Rg/R0 (solar radiation/solar radiation on a horizontal surface at the top of atmosphere), as ordered, and n/N (number of hours of sunshine/day length in hours) as abscissa. The slope of the line will be the constant b and the linear coefficient, the constant a. The estimated results were compared to the observed using the Kolmogorov-Smirnov test, realizing that the models can be accepted. So, the equation to aim the solar global radiation is: Rg = R0 (0,2662+0,3592 n/N)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work analyzed the loss of sensible heat from one fluid to be considered homogeneous heat distribution on a thermal reservoir with cylindrical geometries composite insulating layers. We studied two thermal reservoirs with a volume of 20 liters, and the first has a layer thickness of 75 mm of expanding polyurethane foam wrapped in the polycarbonate container and the second container has only layer thickness of 5 mm of polycarbonate, as insulation of fluid of the external environment. The experimental results are compared with theoretical results obtained through a calculation script, displayed and detailed during the work development, from the theory of energy balance. The maximum error introduced between the theoretical and experimental results were 3.5% and 1.4% respectively for the Boilers with or without a polyurethane coating

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Brazil faces a complex problem in respect to municipal solid waste, having been in recent years an increase of its generation without the country there be adequate for proper disposal thereof. In many states , the percentage of waste destined improperly , ie , in dumps , landfills, send- outs , among others , is greater than that disposed in landfills , which would be the most correct way to be made. It can be argued that this discrepancy is due to the high cost of implementation and operation of the landfill, and the same need large areas with physical characteristics that suit their operations . When there is a provision in properly constructed landfills , municipal solid waste grounded generate gases with high potential energy through biochemical reactions during the anaerobic decomposition of organic material stored . Such gases can be used for power generation within the landfill or other economic means . To estimate the gas generation will be sufficient for such economic compensation , there are mathematical models that make estimating the amount of gas produced . These models calculate the energy capacity and generation , using parameters obtained based on the characteristics of solid waste , climate of the region where they are grounded and grounding time . Such models have been raised and studied so that it was possible to perform simulations that demonstrate the behavior of biogas generation related to the external conditions of the landfill that interfere with biological reactions within. The results show differences between the values obtained , it shows that the preparation of the models found and used in the simulations were allocated amounts for different parameters that determine this difference in the estimate . Therefore, to rule, the models have difficulty understanding this because there is no clarity in the formulation of the equations , and the definition of variables and parameters would require a detailed study to...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The study of mathematical modeling assists in evaluation of the capacity of production and measurement of generation time of biogas in landfills, enabling the implantation of projects of energy generation from methane. Thus, the work aims, by simulating scenarios of potential methane generation in the landfill in Rio Claro, the use of field data from methane flow and waste grounded parameters as references for selecting values of k e L0 used to estimate methane generation model in LandGEM. As a result it was found that compared the characteristics adopted in the four scenarios recommended by the USEPA literature with those found in the landfill of Rio Claro (high amount of organic matter in the waste landed and daily practice of leachate recirculation), the scenario that apparently better represent the rate of methane generation is the scenario 01, with k = 0.7 and L0 = 96. Now, the adjustment of parameters in relation to the data field of methane flow, the value of L0 which best fits the methane generation from the landfill in Rio Claro is 150, while for k the line behavior that best represents the reality are values between 0.7 and 0.3. Regarding the parameters of the waste grounded, between the suggested values of k, 0,3 is most consistent with the intermediate level of biological degradation of the residue grounded, while L0 due to the biodegradability of the waste, a new value between 120 and 150 may be more appropriate for the study

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters