Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Impacto humano afeta negativamente a dispersão de sementes de frutos ornitocóricos: Uma perspectiva global

Ornithochorous fruits make up an important part of the diet of birds and many studies have related the different morphological types of fruits with the choice by birds. We analyzed the intrinsic characteristics of plants and how human impact can affect this choice. Through analyses of covariance we related the degree of human pressure in each study site (high or low) and the morphological characteristics of 57 ornithochorous species with visiting rates and consumption of fruits by birds. We did not find any intrinsic plant characteristic (life form, size and type of diaspore) that explains the rates of consumption and visit by birds. On the other hand, the degree of human impact affected directly the mutualism between plants and birds. Plant species located in areas that suffer high human pressure had number of visits and consumption rates 3,3 and 3,5 lower than plants located in pristine areas, respectively. The negative consequences of the reduction of consumption of fruits in areas with high human pressures may directly affects the interactions between birds and plants and the regeneration of the ornithochorous species.

Smoking enhances bone loss in anterior teeth in a Brazilian population: A retrospective cross-sectional study

The aim of the present study was to radiographically evaluate the effect of smoking on bone loss resulting from chronic periodontitis. Periapical radiographs were analyzed of 80 patients with chronic periodontitis (40 current or former smokers and 40 never-smokers) that attended a private periodontal practice. The smokers or former-smokers with a minimum consumption of 10 cigarettes/day for a period of over 10 years were selected. Interproximal radiographic bone loss was considered as the distance between the cementum-enamel junction and the alveolar bone crest. Bone loss for smokers was higher than that observed in never-smokers (p < 0.05) (3.33 ± 1.09 mm and 2.24 ± 0.76 mm; mean ± standard deviation for smokers and non-smokers, respectively). When each region of the mouth was comparatively evaluated, it was observed that the smokers' incisors presented the highest bone loss when compared with the other groups of teeth (p < 0.01). Within the limits of the present investigation it can be concluded that smoking enhances the bone loss resulting from periodontitis and that the incisors are the teeth most affected.

Hydrothermal synthesis and crystal structure of a copper(ii) coordination polymer with bridging dicarboxylate and diamine ligands

This work reports on the synthesis of a copper(II) coordination compound with 4,4-oxibis(benzoate) (obb) and trans-1,2- bis(4-pyridyl)ethene (bpe) ligands. The complex was characterized by single-crystal X-ray diffraction, which showed a 3D polymeric structure. Each copper center is surrounded by four oxygen atoms at the basal plane and one nitrogen atom and one copper atom at the axial positions, revealing a distorted octahedral geometry. Four carboxylic groups bridge two copper atoms, forming a cage-like structure, with the distance between the metallic centers being 2.656(1)Å. 2008 © The Japan Society for Analytical Chemistry.

Estimación de parámetros genéticos para la producción de leche en el día del control empleando un modelo de regresión aleatoria para primeras lactancias en búfalos de la costa norte de Colombia

A total of 5575 monthly test-day yield records from 796 lactations buffaloes first in the north coast of Colombia. The model included random direct additive genetic and permanent environment effects. As fixed effects were included, contemporary groups, and age of cow at calving as covaraible, linear and quadratic effects. Test-day (PLDC) yield was 3.89 ± 1.14 kg. The PLDC ranged from 2.86 kg to 4.26 kg while the highest values towards the middle of lactation. The heritability estimates obtained for PLDC ranged from 0.23 to 0.47. Genetic correlations between PLDC, declining steadily increased the distance between PLDC. Phenotypic variances were higher in the initial PLDC and decreasing towards the end of lactation. The results found in this study indicate that there is a high genetic variability for the PLDC in the population studied using a random regression model.

Low caloric value of ethanol itself increases alveolar bone loss in ligature-induced periodontitis in male rats

This study aimed at morphometrically evaluating the influence of variable caloric values of ethanol consumption on alveolar bone loss in periodontitis in male rats. Thirty-six male rats were randomized into four groups of nine rats each, as follows: Test group A (low) - rats were fed an ethanol-containing liquid diet (ethanol representing 22% of total caloric value); Control group A - rats were fed a pair-fed control diet (ethanol replaced by isocaloric amounts of carbohydrate); Test group B (high) - rats were fed an ethanol-containing liquid diet (ethanol representing 36% of total caloric value); Control group B - rats were fed a pair-fed control diet for Test B. Following anesthesia, cotton ligatures were placed around the cervix of the right upper second molar. At eight weeks, the maxillary bones were removed and alveolar bone loss was analyzed by measuring the distance between the cementoenamel junction and the alveolar bone crest at buccal and palatal sites of the upper second molar. The unligated groups showed no significant differences between the bone loss values observed for the low and high caloric values of ethanol (p > 0.05). In the ligated groups, the rats receiving low caloric values of ethanol showed significantly greater bone loss compared to the isocaloric rats (p < 0.05); however, the rats receiving high caloric values of ethanol showed no significant differences compared to the controls. Analysis of the results demonstrated that, in male rats, ethanol itself affected ligature-induced bone loss when representing a low value in the total caloric value.

Cone-beam computed tomography analysis of the apical third of curved roots after mechanical preparation with different automated systems

The present study evaluated by cone-beam computed tomography (CBCT) the apical canal transportation and centralizing ability of different automated systems after root canal preparation. The mesiobuccal canals of maxillary first molars (n=10 per group) were prepared with: GI - reciprocating system with K-Flexofile; GII - reciprocating system with NiTiFlex files; GIII - rotary system with K3 instruments; GIV - rotary system with RaCe instruments. CBCT scans were taken before and after biomechanical preparation up to a #40.02 diameter. Canal transportation was determined by measuring the smallest distance between the inner canal walls and the mesial and distal sides of the root. The centralization ability corresponded to the difference between the measurements from transportation evaluation, using the linear voxel to voxel method of analysis. The mean transportation was 0.06 ± 0.14 mm, with a tendency to deviate to the mesial side of the root (n=22), with no statistically significant difference among the groups (p=0.4153). The mean centralization index was 0.15 ± 0.65 also without statistically significant difference among the groups (p=0.0881). It may be concluded that apical canal transportation and centralization ability were not influenced by the type of mechanical movement and instruments used.

Infraorbital foramen location in dry human skulls

The objective of this study was to determine the mean distance between the infraorbital foramen and the infraorbital margin, as well as the mean distance between the infraorbital foramen and the piriform aperture on both sides of dry human skulls, with the aim of improving the efficiency in clinical situations, such as surgery and anesthetic procedures. Two hundred ninety-five skulls were used (590 sides), located in the Frankfurt Plane through a craniostat. The measurements were collected by two distinct operators, with a dry tip compass and carried to a caliper. The general mean obtained between the infraorbital foramen and the infraorbital margin was 6.37 mm (±1.69 mm), with a mean of 6,28 mm (±1.79 mm) on the right side and 6.45 mm (±1.76 mm) on the left side. The general mean obtained between the infraorbital foramen and the piriform aperture was 17.67 mm (±1.95 mm), being 17.75 mm (±2.10 mm) on the right side and 17.60 mm (±2.04 mm) on the left side. There were statistically significant differences between the right and left distances of the infraorbital foramen and the infraorbital margin, verified by the Student's-t test. The results of this study allow a more precise location of the infraorbital foramen, particularly as regards the infraorbital margin, since this distance is of relevant importance as a repair point during surgical procedures involving this anatomical structure.

Influence of alcohol consumption on alveolar bone level associated with ligature-induced periodontitis in rats

Alcohol consumption is a risk indicator for periodontal disease. The purpose of this study was to morphometrically evaluate the influence of alcohol consumption on alveolar bone level associated with ligature-induced periodontitis in rats. Thirty-six female rats (Wistar, 120 days-old) were randomly divided into three groups that received a daily administration of a water diet (control, n = 12), a 10% alcohol diet (10% ethanol, n = 12) or a 20% alcohol diet (20% ethanol, n = 12). Four weeks after the onset of the experiment, cotton ligatures were placed around the cervix of the upper right second molar in six rats. The other 6 rats in each group remained unligated. The rats were sacrificed four weeks after ligature placement. The maxillary bones were removed and alveolar bone loss was analyzed by measuring the distance between the cementoenamel junction and the alveolar bone crest at 2 buccal and 2 palatal sites on the upper right second molar. Analyses between the ligated and unligated groups showed that the presence of ligature induced alveolar bone loss (p < 0.05). Unligated groups showed no significant differences between each other (p > 0.05). In the ligated groups, rats receiving 20% ethanol showed significantly greater bone loss compared to control rats or rats receiving 10% ethanol. These results demonstrate that alcohol consumption may increase alveolar bone loss in female rats in a dosedependent manner.

Effectiveness of intraoral suction systems and aspirating tips for evacuation of aluminum oxide particles during use of air-abrasion

Aim: The purpose of this study was to compare the effectiveness of a high-volume evacuation and a conventional intraoral suction system and aspirating tips for capturing aluminum oxide particles during use of an air-abrasion device. Methods: A phantom head was fixed at the dental chair head with secured a metallic device with 5 horizontal shafts, corresponding to operator's clockrelated working positions, and one vertical shaft to simulate the operator's nasal cavity. Petri plates were fixed to the shafts at distances of 20, 40 and 60 cm from the center of the oral cavity of the phantom head to collect the aluminum oxide particles spread over during air abrasion. The dust was aspirated with two types of suction tips used with both suction systems: a conventional saliva ejector and a saliva ejector customized by the adaptation of a 55-mm-diameter funnel. Results: The amount of particles showed that the greatest abrasive particle deposition occurred at a distance of 20 cm from the center of the oral cavity of the phantom head at 9 o'clock operatory position with the conventional saliva ejector attached to high-volume evacuation system. Conclusions: The greatest deposition of aluminum oxide particles occurred at the shortest distance between the operator and the center of the oral cavity, while using the high-volume evacuation system associated to the conventional suction tip.

Classificação de áreas de favelas a partir de imagens IKONOS: Viabilidade de uso de uma abordagem orientada a objeto

The growth of large cities is usually accelerated and disorganized, which causes social, economical and infrastructural conflicts and frequently, occupation in illegal areas. For a better administration of these areas, the public manager needs information about their location. This information can be obtained through land utilization and land cover maps, where orbital images of remote sensing are used as one of the most traditional sources of data. In this context, the present work tested the applicability of the object-based classification to categorize two slum areas, taking into account the structure of the streets, size of the huts, distance between the houses, among other parameters. These area combinations of physical aspects were analyzed using the image IKONOS II and the software eCognition. Slum areas tend to be, to the contrary of the planned areas, disarranged, with narrow streets, small houses built with a variety of materials and without definition of blocks. The results of land cover classification for slum areas are encouraging because they are accurate and little ambiguous in the classification process. Thus, it would allow its utilization by urban managers.

Flexibility and torsional resistance of three nickel-titanium retreatment instrument systems

Aim To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. Methodology Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n=12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n=12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α=0.05). Results The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. Conclusions The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application. © 2011 International Endodontic Journal.

A First approach on the new transmission system in northern Brazil

This article shows an analysis of the electrical parameters of a three-phase transmission line section using a relatively new design for steel towers characterized by 280 meters high. These main features, the height of the line conductors and distance between them, are intrinsically related to the longitudinal and transversal parameters of the line. By this means, an analysis was carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 440-kV line through a wide range of frequencies and a variable soil resistivity. © 2012 The Institution of Engineering and Technology.

Introduction of a non-conventional solution for Amazon transmission system: Analysis of the electric aspects

This article shows an analysis of the longitudinal electric parameters of a three-phase transmission line/section using a 280-meter high steel tower. This characteristic, the height of the line conductors and distance between them, are intrinsic related to the longitudinal and transversal parameters of the line. By this means, an accurate study was carried out in order to show the electric variations between a transmission line using the new technology and a three-phase conventional 440 kV line for a wide range of frequencies and a variable soil resistivity. In addition, by using a digital line model, simulations are carried out in time domain to analyze critical overvoltage transients on the studied line. © 2011 IEEE.

Florescimento da lavoura cafeeira sob diferentes manejos de irrigaçâo

The objective of this work was to evaluate the effect of different irrigation managements on flower induction and bloom of coffee trees. The study was carried out at the experimental area of the Engineering Department at Universidade Federal de Lavras, on Acaia Cerrado MG-1474 coffee cultivar, planted 3.0 meters between rows and 0.6 meters between plants and drip irrigated since planting in 1997. The experimental design was randomized blocks with 4 replicates and 5 irrigation treatment: A= non irrigated; B= irrigated throughout the whole year every time the water available was at most 25% of total available water (TAW); C= irrigated during the whole year every time the water available was at most 75% of TAW; D = treatment C during January, February, March, July, October, November and December and treatment B during April, May, June, August and September; E= treatment C during April, May, June, August and September. Each plot was composed of 10 plants and used 2 plants for the evaluation of secondary branches, number of flowers per flowering, number of fruit and fruit set between September and May during the growing seasons of 2006/2007 and 2007/2008. The different irrigation managements did not significantly influence the total number of flowers, number of branches and percentage of flowers that resulted in fruits. Comparing data from two harvests verified the biennial effect in the total number of flowers, percentage of fruit set and branch gain.