LEVANTAMENTO DAS CARACTERÍSTICAS MICROBIOLÓGICAS DA ÁGUA POTÁVEL CONSUMIDA NA CIDADE DE POTIRENDABA - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização dos finos de areia de uma fundição e sua incorporação em argamassa de cimento

Pós-graduação em Engenharia Civil e Ambiental - FEB

Utilização da mínima quantidade de lubrificante (MQL) com água no processo de retificação cilíndrica em cerâmica avançada com rebolo de ligante resino cerâmico/metálico

Pós-graduação em Engenharia Mecânica - FEB

Desenvolvimento de imunossensor impedimétrico para detecção do corante disperso Red 1

Pós-graduação em Química - IQ

Estudo da qualidade da água distribuída pelo poço artesiano da FEG em relação à água servida pelo abastecimento público de Guaratinguetá

We conducted a study of the quality of water distributed by Artesian Well in relation to water supply served by the public for purposes of human consumption of UNESP Campus Guaratinguetá. Two sections of the network were randomly chosen and monitored for 105 days: the stretch of the pipeline started off the Water Treatment Station of the Autonomous Service of Water, Sewage and waste in the Municipality of Guaratinguetá and ended in a point consumption of the Child Family Center, while the section B began at the output of an artesian well and finished in a point of consumption of the Department of Civil Engineering. It is the deterioration of water quality in parts A and B, through comparative analysis of Bicarbonates, Total Hardness, Total Iron, free residual chlorine, pH, Total Residual, Turbidity, Conductivity, Color, Fecal Coliforms and Total Coliforms. Among the observations that can be highlighted: the Total Hardness was found in highest concentration in the extract; for Total Iron significant variations were obtained for both parts, and reduction of this parameter in two points of consumption analyzed, not the expected increase concentration, because the contact of water along the pipe, the CRL showed significant depletion to section A, which can be related to impurities in the water, the presence of biofilm on the walls of pipes, or because this is the stretch of greater extent to be covered by water for pH, this indicated that the water is alkaline and slightly acidic stretch in section B; Turbidity was found for the higher concentration to the passage, and a considerable reduction of this parameter at point consumption due to deposition of particulate matter along the stretch, the conductivity also showed a higher concentration in the extract, as well as an increase in this parameter at the point of consumption. Upon leaving ... (Complete abstract click electronic access below)

Levantamento bibliográfico sobre o método SODIS de desinformação solar da água

Frente ao desafio de prover água de melhor qualidade para o uso humano a um custo acessível e de simples execução, muitos métodos tem sido desenvolvidos e estudados. Uma metodologia que tem se destacado atualmente, é o método SODIS, sigla em inglês que significa, desinfecção da água por meio da luz solar. Essa metodologia tem como princípio a inativação de uma variada gama de microrganismos patogênicos a partir da ação dos raios solares. Essa metodologia consiste em submeter garrafas de água a um banho de luz solar por algumas horas. Para a realização do método SODIS pode-se utilizar garrafas PET (politereftalato de etileno), sendo que sua execução é simples e rápida além de possuir mínimos riscos envolvidos. A fim de comprovar a eficácia desse método, muitos estudos tem investigado os mecanismos e fatores importantes envolvidos no processo de inativação. Da compreensão desses mecanismos e fatores críticos, preconizou-se ações que visam garantir e maximizar a eficiência do método em variadas situações e condições climáticas sem que o método se torne complexo ou oneroso. O método SODIS se mostrou eficaz na inativação de várias espécies de fungos, vírus, bactérias e até protozoários. Estudos de campo revelaram a sua eficácia prática, ocasionando uma diminuição expressiva nas ocorrências referentes a quadros de diarréia e diarréia severa nas populações estudadas

Eficiência energética em uma indústria madeireira

In wood processing industries, which use electrical equipment in the production process, in most cases these are badly scaled or operate under inadequate conditions, resulting directly in industrial energy efficiency, which proves important because besides having technological innovation, also with practices and policies, aims to decrease power consumption. So in a wiring project should take into account the variables that influence energy efficiency. Thus this work has been reviewed and subsequently calculated some of these variables, such as active power, power factor and demand for the entire industry (global) and also for specific equipment, the chipper. The network analysis was performed in a wood processing industry in the city of Taquarivaí - SP, and evaluated these variables with a network analyzer and also by analysis on energy bills, which were found in both analysis levels below those found in literature. These factors are due to poor design, improper use, storage of equipment or even by characteristic of the production process, ie, the equipment running on empty because of the volatility of production

Uso de sistemas construídos de áreas alagadas (Constructed Wetland System - CWS) tipo ascendente/descendente, para tratamento de efluentes avícolas

Human development and population growth during the twentieth century increased the water demand, tripling its consumption between 1950 and 1990. As the water streams were polluted; and as water is the source of minerals and also regulates vital functions, it becomes the vehicle of transmission and consequently spreads many diseases. Probably, the industries are the major responsible for this pollution when they dump untreated effluents to water streams, saturating the already insufficient net of sanitation facilities polluting water and soil. An effective treatment has been established with low cost in Europe and the United States, through constructed systems on wetlands Constructed Wetland Systems - CWSs, gradually used in other countries in the last three decades. Lately, we observe a continuous growth in Brazilian poultry business, and poultry industry showed greatest dynamism in the country, following the global market. Pondering this information and the efficiency of such treatment, this work aimed to study prototypes, in a laboratory scale, simulating ascending and descending types of CWSs, vegetated with aquatic macrophytes Eichhornia crassipes and the uses of aggregates and soil, to treat industrial wastewater from slaughterhouses and aviary. We conducted the initial characterization of the effluent to have an idea of its constituents and to scale the system and the continuous flow. Furthermore, we characterized the soil to be used in this system. The collects are periodically made in the refrigeration industry FRICOCK FRIGORIFICAÇÃO AVICULTURA INDÚSTRIA E COMÉRCIO LTDA. for local treatment simulation. The effluent that was treated with 12 prototypes of CWSs are analyzed with some frequency. The results of these reviews were compared to the effluent coming from the industry... (Complete abstract click electronic access below)

Água, preservação, uso e conservação: subsídios teórico-práticos para o ensino fundamental

O presente trabalho aborda os problemas relacionados com a escassez de água, os desafios para preservação, as perspectivas futuras e a conscientização da população. Mostra que grande parcela da população mundial já sofre com a falta de água potável, levando a conflitos pelos usos múltiplos da água. As diversas formas de poluição causam degradação dos rios, lagos e aquíferos prejudicando todas as formas de vida, desequilibrando todo o ecossistema. Novas tecnologias para agricultura, estratégias para aumentar as reservas de água potável tanto superficiais quanto subterrâneas e estratégias para o reaproveitamento de água são medidas encontradas para um consumo sustentável

Avaliação da auto-suficiência energética em reatores anaeróbios aplicados ao tratamento de resíduos da indústria de produção do etanol

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e água cinza

The anaerobic treatment of sewage is widely employed in Brazil and it is an appreciated way for the treatment of effluents, helping to reduce the environmental impact in rivers. The methane gas obtained from the process can be applied to improve the energetic efficiency of the system, reducing the amount of waste and the cost of the treatment process. This work presents the net energy balance of anaerobic reactors applied to the treatment of sewage. The analysis was performed considering full-scale and laboratory-scale treatment systems. In laboratory scale, the results from three kinds of systems were compared regarding the biological treatment of greywater. Two of them (UASB7 and UASB12) were anaerobic and the other one was a combined anaerobic-aerobic system (UASB7/SBR6). Greywater methanization (compared to theoretical maximum) was calculated considering 100% removal (g BOD/day), the literature percentage removal and the anionic surfactant presence in the effluentt. For each of these three cases, the efficiencies were, respectively, 16.9%, 43.6% and 51.3% in UASB7 reactor, 25.6%, 50.3% and 59.2% in UASB12 reactor and 30.6%, 61.2% and 71.9% in UASB7/SBR6 reactor. The energetic potential was found to be 4.66x10-4, 7.77x10-4 and 5.12x10-4 kWh/L for the UASB7, UASB12 and UASB7/SBR6 reactors, respectively. The pumping system, the aeration (in the anaerobic-aerobic system) and the temperature controlled heating system were considered to calculate the energetic consumption. However, the third one was not employed since tropical regions like Brazil do not need heating systems and also because of its high energetic consumption. The calculated net energy balance in the reactors was negative in the case of greywater, respectively -0.16, -0.28 and -0.18 kWh/L for the reactors UASB7, UASB12 and UASB7/SRB6. In full scale (ETE Jardim das Flores - Rio Claro, SP), the average energy... (Complete abstract click electronic access below)

Avaliação da viabilidade econômica do uso de um aquecedor solar de água de garrafas pet para aquecer o ar de uma cabine de pintura e uma estufa de secagem

Nowadays, the biggest part of the world's energy supply comes from fossil fuels and nuclear. However, the current need of the society for the preservation of the environment and wise use of natural resources, has favored the search for alternative energy sources and improvement of energy efficiency. In this new scenario, companies are beginning to mobilize in order to adapt its facilities to renewable energy. Solar, with its immense potential, not really exploited yet, can be very useful for companies that want to beat their sustainability goals. Given these facts, the aim is to evaluate the economic viability of introducing a solar water heater which uses a colorless PET bottle as one of its components in a plant. The hot water generated will heat the air of a paint booth and a warm house, reducing energy consumption, since they are heated by electric heaters

Gestão de recursos hídricos: uma abordagem da economia institucional sobre a reutilização da água

Neste trabalho priorizou-se a visão da água enquanto bem público. No seu tratamento, dado que a economia neoclássica tradicional não nos oferece uma resposta desejável, pisamos o campo da Economia Institucional: da importância das instituições para o desenvolvimento até os diferentes arranjos institucionais, com o aparecimento de múltiplos agentes. Com isso procuramos atacar o problema do “carona”, e mostrar como pode haver cooperação entre os agentes para a produção de um bem público, no caso a água. Em posse desses argumentos, mostramos como é feita a atual gestão dos recursos hídricos no Brasil, descentralizada e participativa, através dos Comitês de Bacias Hidrográficas. Em seguida mostramos como a articulação regional, diante de um cenário de escassez hídrica para abastecimento antrópico, e seus consequentes conflitos, anterior à formação dos CBHs, contribuiu para pressionar um tradicional segmento da indústria na Região Metropolitana de São Paulo (RMSP), o Pólo Petroquímico, e como a opção pela reutilização da água tornou-se uma alternativa não só viável, como economicamente interessante, a ponto da Sabesp e da construtora Odebrecht iniciarem o projeto Aquapolo Ambiental

Redução de consumo de energia eletrica a partir de reaproveitamento de energia termica com uso de ciclo rankine orgânico

This paper is proposed the usage of an Organic Rankine Cycle (ORC) along with waste heat recovery from an inconstant heat source. This method of waste heat recovery with intermittent heat source is part of a technical viability study. This paper also brings up the usage of thermal energy storage as heat source for the ORC. This paper is based on a heat treatment company study in which a natural gas furnace is explored. Data such as mass flow, temperature and specific waste gas heat from this furnace are used through calculations. Calculations are made also based on furnace cycles. This viability study considers a series of working fluids such as ammonia, benzene, R113 and R134a. Results point out that ORC with out thermal storage and using refrigerant fluid ammonia is the best alternative

Implementação da metodologia TPM em uma indústria do setor de higiene pessoal, saúde e beleza

This work presents a project of Action Search in a consumption industry of the sector of personal care, health and beauty. Following the implementation steps of Autonomous Maintenance Pillar of TPM methodology, stands for Total Productive Maintenance, this work aims to ensure the advancement of some machines in a production line of the company to the next steps of the methodology implementation, demonstrating the results achieved by the TPM. In the company in question, the TPM has been implemented in the past but lost strength over the years and some of its concepts were abandoned, producing then a drop in the equipments efficiency, increased wastes and breaks in the processes, as well as loss in product quality. Then, the need arose to restart the implementation process from the beginning, to strictly follow all the steps of the methodology, ensuring increased efficiency of equipment and processes. Through training and a changing in the company culture, it was possible a joint effort between Operation and Maintenance in order to enhance the knowledge of the operators on their machines. Initially, it was developed a general cleanliness program of equipments so that it could be possible to find the anomalies in the process. Subsequently, operators and maintainers were trained to detect anomalies, enabling equipments to work under their basic conditions of operation and subsequently building provisional standards of equipment cleaning, lubrication and inspection. Through the improvement presented by some indicators such as OEE, wastes, bankruptcies and unavailability, it was proved the importance and the positive effects of TPM implementation in manufacturing