Estudo das características fluidodinâmicas do bagaço de cana de açúcar para aplicações da gaseificação no setor sucroalcooleiro

In this work is studied the fluid dynamic characteristics of sugarcane bagasse for gasification applications and use of syngas in the sugarcane sector. This is an experimental work, which is initially performed the particle size separation of sugarcane bagasse particles, using appropriate equipment. Through the experiment is possible to determine the average diameter of particles pomace typical sugarcane mill. The equipment used for the grading sieve separation assembly consists of several dimensions, arranged vertically and which shows adequate for good separation from the pulp. Later, it makes immediate analysis for the determination of moisture, ash, volatile materials and fixed carbon. The study also determines the gross calorific value and allows analysis of densities of particles of sugar cane bagasse. Also studied the bagasse morphology using electron microscopes, where it was possible to visualize the geometry of the particles of bagasse. The use of Electronic Scanning Microscopy (SEM) provided better understand the morphology and particle size measured by using photography methods. Two methods for determining the sphericity of the particles were also used. The experiments carried out using appropriate standards and specific equations, allowing compare the present results with the values found by several researchers. Subsequently, fluid dynamic simulations were performed for the determination of porosity and minimum fluidization velocity theoretical. It follows that the sphericity and porosity of the bagasse particles influence the minimum fluidization velocity of biomass

Imobilização de fosfatos em microesferas poliméricas contendo biochar: preparação, caracterização e liberação lenta em sistemas aquosos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo sobre desruptores endócrinos em sistemas aquáticos: detecção e perspectivas de tratamento das águas do Rio Aporé-MS/GO, utilizando-se adsorventes sólidos

Pós-graduação em Ciência dos Materiais - FEIS

Caracterização da cinza de bagaço de cana-de-açúcar e aplicação no solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Qualidade de filés de tilápia alimentadas com pigmentante de origem bacteriana: Thiago Luís Magnani Grassi. -

Pós-graduação em Ciência Animal - FMVA

Memória e identidade nos romances de Milton Hatoum

This article deals with how Milton Hatoum explores aspects of the memory, through the convergence of voices in his four Lusophone novels Tale of a Certain Orient, The Brothers, Ashes of the Amazon and Orphans of Eldorado. A profile of complex characters is constructed through a synthesis of accounts, letters and depositions, as different faces of individuals and society at large are interspersed through memory.

Aceitabilidade e qualidade nutricional de beterrabas in natura e pré-processadas submetidas a diferentes métodos de cocção

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Caracterização físico-química da biomassa produzida em sistemas florestais de curta rotação para geração de energia

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Caracterização de genótipos de soja-hortaliça por análise de componentes principais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processing yield and chemical composition of rainbow trout (Oncorhynchus mykiss) with regard to body weight

The influence of weight (W) category of the rainbow trout on processing yield and chemical composition of the entire eviscerated fish and fish fillet was analyzed. A completely randomized design was employed for processing variables (W1 = 300 to 370 g and W2 = 371 to 440) coupled to a 2 x 2 factorial scheme for the chemical composition (W1 and W2 and forms of presentation: fillet and whole eviscerated fish). W1 showed higher yield for entire eviscerated fish (83.00%) and head (13.27%), but a lower yield for the viscera (17.00%), when compared to W2. We did not affect abdominal muscle yield, fillet with or without skin, skin percentage and residues. There were significant differences between W for moisture (W1 = 72.30% and W2 = 71.15%) and lipids (CP1 = 7.96% and CP2 = 9.04%) rates. Fillet moisture contents (73.74%) and crude protein (19.05%) were higher (p < 0.01) than for entire eviscerated fish (69.71% and 17.81%, respectively). Ash (2.15%) and lipid (10.48%) rates were higher (p < 0.01) for entire fish when compared to those of fillets (1.16% and 6.52%, respectively). The slaughter of fish weighing between 300 and 370 g and their fillets are more adequate for the market.

Chemical and Fatty acid composition of different cuts cooked or uncooked from yearling bulls fed oil sources

This study evaluated the chemical and lipid composition of uncooked or cooked loin (Longissimus thoracis) and rump (Biceps femoris) in samples of 2.54 cm thick from 35 carcasses of Nellore young bulls finished in feedlot for 96 days and slaughtered at an average weight of 532.17 ± 30.25 kg and 24 months of age. The rump had the lowest level of protein and ash (18.57 and 0.90%, respectively) and the highest level of ether extract compared to loin (3.37 and 1.90%, respectively). Higher levels of cholesterol were found in rump compared to loin (40.91 e 30.93 mg 100 g-1, respectively). The uncooked loin showed lower content of saturated fatty acids and higher content of polyunsaturated fatty acids. The best values for the omega-6: omega-3 ratio was observed in the uncooked beef. In the present study, the loin was healthier due to the higher amount of polyunsaturated fatty acids compared to rump. Cooking the meat decreases the levels of polyunsaturated fatty acids, omega-3, omega-6 and the omega-6: omega-3 ratio.

Rubrivivax gelatinosus na alimentação de tilápias para incrementar a qualidade dos filés

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reflexos da clarificação do caldo de cana com moringa sobre compostos inorgânicos do açúcar VHP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Production of ginger vinegar

Vinegar is a food of condiments group that have great use in the food industry. This study aimed to evaluate the effects of parameters of the acetic fermentation process in the production of ginger vinegar. A suspension of ginger rhizomes with 12% of starch was subjected to enzymatic hydrolysis process to obtain hydrolyzed with 85.6% of glucose. After the alcoholic fermentation the wine was obtained with 40.3% ethanol. The acetic fermentation process of ginger alcoholic solution followed a completely randomized design in a factorial for three factors at two levels. The independent variables were: temperature, nutrients and proportion of "strong vinegar" and alcoholic solution (initial acidity). Results showed variation from 2.74 to 3.70% for dry extract and 2.13 to 2.83% for ash in vinegars. The profile of organic acids of ginger vinegars showed the presence of acetic, citric, malic and succinic acids in all treatments. The condition of 20 degrees C, initial acidity 1:1, with addition of nutrients allow obtaining good quality vinegars and higher GK yields.

Deposition of bodily chemical components in the carcass of tilapia (oreochromis sp.) strains

The knowledge of how animals deposited chemical components as water, protein, fat and ash in the carcass is importance for the formulation of a balanced diet, allowing maximum performance with a low environmental impact. So, the study was carried out to evaluate the influence of different tilapia strains (Chitralada, Commercial, Red and Universidade Federal de Lavras [UFLA]) on the deposition of bodily chemical components in the carcass. The bodily components analyzed were water, protein, fat and ash. For the determination of the bodily chemical deposition curves by age, the exponential, Brody, logistic, Gompertz and von Bertalanffy models were adjusted. The Commercial and UFLA strains deposited water at a faster speed (P<0.05) compared with the remaining strains. As for protein, the Red strain had a lower estimated maturity weight (49.37 g), and was more precocious (202 days) with regard to maximum deposition in comparison to the other strains (Chitralada, UFLA and Commercial) in which there was an estimated maturity weight of 231.5 g and maximum depositionfor 337 days. There were no differences (P>0.05) for the logistic model parameter between Red, UFLA and Commercial strains for fat, which presented a maximum fat deposition (0.23 g) at 310 days of age. Regarding ash deposition, the Commercial strain presented a higher maximum deposition (0.10 g) at 337 days, occurring later than the other strains that presented maximum deposition (0.033g) at 254 days of age. Thus, it was concluded that the genetic strains evaluated differ in chemical deposition curves of water, protein, fat and ash.