Caracterização in vitro de técnica biomagnética empregando magnetômetros 3D para avaliar tempo de trânsito esofagiano

The biomagnetic techniques use different magnetic field detectors to measure parameters of the human physiology. Those techniques present the advantage of being noninvasive and radiation free. Among them we can show up the Superconducting Quantum Interference Device (SQUID), the Current Alternate Biosusceptometry (ACB) and, more recently, the employment of anisotropic magnetoresistive sensors. Those magnetic sensors have a low cost and good sensitivity to measure different physiological parameters using magnetic markers. The biomagnetic techniques have being used successfully through study on the characteristics of the gastrointestinal tract. Recent research, the magnetoresistors were used to evaluate the transit time and localization of magnetic sources in different parts of the gastrointestinal tract. The objective of this work is the characterization, with in vitro tests, of a biomagnetic instrumentation using two 3-axis magnetoresistors arranged in a gradiometric coplanar setup to evaluate esophageal transit time, analyze and compare the results of experimental signals and the magnetic theory, as well as evaluate the instrumentation gain with use of tri-axial sensor front to the mono-axial sensor. The instrumentation is composed by two three-axis sensing magnetometers, precision power supply and amplifier electronic circuits. The sensors fixed in a coplanar setup were separate by distance of 18 cm. The sensitivity tests had been carried through using a cylindrical magnet (ø = 4 mm and h = 4 mm) of neodymium-iron-boron (grid 35). The tests were done moving the permanent magnet on the sensors parallel axis, simulating the food transit in... (Complete abstract click electronic access below)

Confecção e caracterização de filmes finos de boro para a medida da taxa de reação 10B(N, a)7LI na terapia por captura de nêutrons pelo boro

The Boron Neutron Capture Therapy (BNCT), based on the 10B(n,α)7Li reaction, represents a promising modality for the treatment of cancers that are resistents to conventional treatments. So, it is necessary to find drugs (boron compounds) with high selectivity for each type of cancer, the neutrons source should be well characterized and the rate of 10B(n,α)7Li reaction should be measured with great accuracy as possible. This study aimed to develop a method for manufacturing thin films of boron, for measure the 10B(n,α)7Li reaction, and analyze the uniformity of the films. Five thin films of boron were manufactured with three different concentrations of boric acid, heated to transform the acid in boron, irradiated with thermic neutrons coupled to CR-39 detectors, in BNCT line at the reactor IEA-R1 IPEN/CNEN, São Paulo. After the irradiation, the detectors were chemically attacked with NaOH to reveal the tracks. The methodology presented is effective because it resulted in deposition of boron as thin film enabling the quantitative analysis of 10B(n,α)7Li reaction. The analysis of the uniformity of density of the induced tracks in CR-39 shows that, in most of the films, there is no uniformity in surface distribution of boron, but when the film is divided, we obtain some uniform sectors

Estudo de cerâmicas avançadas para fins de blindagem balística

The research involving new materials has always been considered as a differential in the development of a technology company. This occurred naturally since ancient times, often motivated by reasons of a certain age, where the most common material used was also the name of your time and may be cited as an example the Bronze Age, and later was the Iron. Currently, the use of firearms are they used in resolving conflicts between countries, or a more equivocal, as an instrument of social banditry make innovations in the area of shielding welcome, whether for personal use, in the form of vests or vehicle such as cars, tanks and even aircraft. In this context, is a Silicon Carbide Ceramic, with low density and high hardness. Thus, the aim of this study is the evaluation and comparison of these materials, seeking to improve their properties by means of additives such as boron and silicon metal and amorphous YAG. For this work, the specimens were pre-shaped by means of uniaxial later to be referred for isostatic pressing and sintering. The maximum percentage for each additive was 5%, except for the YAG whose percentage was 8.2% (mass percentage). All compositions were subjected to the same tests (x-ray diffraction, apparent density, optical microscopy, Vickers hardness, scanning electron Microscopita), so that one could draw a comparison between the materials under study, samples that showed better mechanical properties and micro structural, related here by hardness testing and microscopy (optical and SEM) were the silicon carbide doped with YAG and alumina samples, demonstrating the potential of these materials for ballistic protection. Other compositions have high porosity, which is highly undesirable, since in order to harmful influences on the mechanical properties discussed below

Influência do boro no crescimento e acúnulo de nutrientes em porta-enxertos de caramboleira

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Nanoelectrocatalytic oxidation of lactic acid using nickel nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Redistribution of B-10 absorbed by leaves and roots of cashew seedlings

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da suplementação com boro no metabolismo ósseo de camundongos diabéticos não obesos

Pós-graduação em Alimentos e Nutrição - FCFAR

Atributos químicos no solo e produção de Cynodon dactylon cv. Tierra Verde sob doses de biofertilizante orgânico

The concentration of nutrients in plant is related to the soil, fertilization, climate, season, cultivar and cultural practices. Aiming to evaluate the soil chemical properties, the dry matter production of shoots and roots, nutrient content in the plant and the chemical composition of the grass Tierra Verde subjected to levels of organic biofertilizer as nitrogen source, an experiment was conducted in a greenhouse at the Faculty of Veterinary Medicine , UNESP, Araçatuba-SP, January-September 2010. Treatments were arranged in a completely randomized design with six fertilized biofertilizer doses (0, 33, 66, 132, 264, 528 m3 ha-1) and five repetitions for three cuts. We used the model split plot, with doses of biofertilizer considered as main treatments and cuts as sub-plots. We obtained a linear response in the production of dry mass of shoots and roots to the dose of 528 m3 ha-1 of organic biofertilizer. Nitrogen fertilization influenced the soil chemical properties and levels of organic matter, sulfur, boron and manganese, and in foliar levels of phosphorus, potassium and copper. The chemical composition was not altered by the influence of organic biofertilizer doses applied to the soil.

Desenvolvimento de detector eletroquímico para cromatografia líquida de alta eficiência baseado em um eletrodo modificado com nanopartículas metálicas para determinação de ácidos carboxílicos em vinhaça de cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Boro em cana-de-açúcar cultivada em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do estado nutricional de mudas de Gonçalo Alves (Astronium Fraxinifolium)

The planting of seedlings, the establishment and maintenance of the natural regeneration process, or the combination thereof, are methods used in the recovery of degraded or disturbed environments, however, often require the addition of soil conditioners. This study aimed to evaluate the influence of conditioners, introduced in degraded soil on growth and nutritional status of Astronium fraxinifolium seedlings. To conduct the experimentation were used as degraded soil conditioner, ash from sugarcane bagasse (CZ) and macrophytes (MC), at the doses of 0, 15, 30 and 45 t ha-1 and 0, 16 and 32 t ha-1 respectively, which combined produced 12 treatments, with three replications, and for field installation, was used the experimental randomized block design. Astronium fraxinifolium (Gonçalo Alves) seedlings, native tree species in cerrado, were introduced in the experimental area and, after 12 months, were evaluated for leaf concentration of nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc (N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn, respectively). Seedlings and adult plants of A. fraxinifolium were collected in preserved cerrado reserve were also analyzed for nutrients foliar concentration to perform a comparative analysis. The leaves collection in the preserved cerrado and experimental area, was accompanied by soil sampling (0.0 - 0,20 m deep), which was analyzed for phosphorus, OM (organic matter), pH, K, Ca, Mg, Al+H (potential acidity), Al (aluminum), Cu, Fe, Mn and Zn. The results show that the applied residues contributed to raise the foliar concentration of Cu and Fe. The foliar concentration of nutrients was higher in A. fraxinifolium seedlings from preserved cerrado, except for B, which was similar between areas, besides Cu and Fe with higher levels in the seedlings from experimental area. The combined addition of residues (MC and CZ), led to increase the plants height and diameter. This...

Reguladores vegetais e nutrientes minerais no metabolismo de plantas de tomateiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Doses e modos de aplicação de boro na produção de mudas de nespereira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Acúmulo de nutrientes e resposta da alface à adubação fosfatada

Nutrient absorption and response of lettuce to phosphorus fertilization. The objective of this study was to evaluate the response of lettuce (cultivar Verônica) to different levels of phosphorus fertilization. The experiment was conducted from 25/09/2003 (sowing) to 03/12/2003 (harvesting) at the Fazenda Experimental São Manuel, UNESP/FCA, Botucatu/SP, under protective structures. The experiment was conducted in a randomized block design, with five treatments (0, 200, 400, 600 and 800kg.ha-1 of P2 O5, in the form of triple superphosphate) and five replications. Plants were grown in 13L plastic pots containing Latossolo Vermelho Distrófico Típico. A quadratic response was observed for the fresh mass of the plant shoots and leaf area, with maximum equivalent levels of 733 and 756kg.ha-1 of P2 O5 , respectively, as well as for potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc accumulation. Linear increases were observed with the treatments of P2 O5 for dry mass of the shoots, leaf number, plant height and nitrogen and phosphorus accumulation.

Soil fertility, nutrition and early growth of physic nut as affected by nitrogen fertilization

The initial growth and mineral nutrition of the physic nut (Jatropha curcas L.) as a function of nitrogen (N) fertilization was investigated. The transplanting of seedlings was carried out in plastic pots filled with 50 dm3 of a Rhodic Hapludox, under a plastic greenhouse. In addition to a control treatment, the dosages of 0, 40, 80, 120, and 160 mg dm−3 N were tested. The results demonstrated that N fertilization for the cultivation of physic nut could be added as top dressing from 60 days after planting with a dosage of 65 mg dm−3. A SPAD index of 46 can be used as a nutritional reference to its initial development. Furthermore, the results suggested that the order of nutrient accumulation by the physic nut plants is as follows: potassium (K) > N > magnesium (Mg) > calcium (Ca) > phosphorus (P) > sulfur (S) > iron (Fe) > manganese (Mn) > boron (B) > zinc (Zn) > copper (Cu).