Criteria for peanut seed pre-conditioning for the tetrazolium test

The staining pattern of peanut (Arachis hypogaea L.) seeds with a tetrazolium solution was evaluated to determine the adequate conditions of seed quality evaluations. Three seed lots with different vigour levels and similar moisture content were pre-conditioned using the combination of five periods of time (4, 8, 12, 16 and 20 hours) and four temperatures (20, 25, 30 and 35 degrees C) and then exposed to a 1.0% tetrazolium solution for three hours. The moisture content levels of seeds conditioned for 8 hours at the temperatures of 25, 30 or 35 degrees C, for 12 hours at 20 or 25 degrees C and for 16 hours at 20 degrees C, were above 30%. In this range of moisture level, the staining in tetrazolium was clear and uniform, reflecting an appropriate conditioning of the seeds. However, under a practical point of view, the period of 16 hours at 20 degrees C showed to be the best option, since it allows to start the pre-conditioning an late afternoon of one day and submit the seeds for staining in the following morning.

Evidence of hetero-epitaxial growth of Pb(Mg1/3Nb2/3)O-3 on the BaTiO3 seed particles of a citrate solution

Citrate solution was employed in preparing Pb(Mg1/3Nb1/3)O-3 (PMN) powder from polymeric precursors. BaTiO3 particles of 600 nm average size were used as seed for growing PMN. X-ray diffraction (XRD) indicated the presence of both, pyrochlore Pb6Nb6MgO22 (P6N) and perovskite phases. Transmission electron microscopy (TEM) observations indicated that only the PMN phase has hetero-epitaxially grown on the BaTiO3 seed particles. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Removal of radionuclides from acid mine waters by retention on adsorbing materials

This study proposes a method for decontamination of acid drainage water from a uranium mine, as an alternative process to lime treatment. The research embodied the recovery of uranium with an ion-exchange resin, treatment of effluent resin with lime, or with inorganic adsorbents and biosorbents. The uranium decontamination level using the resin process was 94% and allowed the recovery of this element as a commercial product. Among the inorganic adsorbents studied, phosphogypsum was effective for Ra-226, Ra-228, and Pb-210 removal. Among the biosorbents, Sargassum sp.was superior in relation to its specific capacity to accumulate and remove Ra-226.

The acid-base impact of free water removal from, and addition to, plasma

Water, compared with plasma at a pH of 7.4, is a weak acid. The addition of free water to a patient should have an acidifying effect (dilutional acidosis) and the removal of it, an alkalinizing effect (concentrational alkalosis). The specific effects of free water loss or gain in a relatively complex fluid such as plasma has, to the authors' knowledge, not been reported. This information would be useful in the interpretation of the effect of changes in free water in patients. Plasma samples from goats were either evaporated in a tonometer to 80% of baseline volume or hydrated by the addition of distilled water to 120% of baseline volume. The pH and partial pressure of carbon dioxide, sodium, potassium, ionized calcium, chloride, lactate, phosphorous, albumin, and total protein concentrations were measured. Actual base excess (ABE), standard bicarbonate, anion gap, strong ion difference, strong ion gap, unmeasured anions, and the effects of sodium, chloride, phosphate, and albumin changes on ABE were calculated. Most parameters changed 20% in proportion to the magnitude of dehydration or hydration. Bicarbonate concentration, however, increased only 11% in the evaporation trial and decreased only -2% in the dehydration trial. The evaporation trial was associated with a mild, but significant, metabolic alkalotic effect (ABE increased 3.2 mM/L), whereas the hydration trial was associated with a slight, insignificant metabolic acidotic effect (ABE decreased only 0.6 mM/L). The calculated free water ABE effect (change in sodium concentration) was offset by opposite changes in calculated chloride, lactate, phosphate, and albumin ABE effects.

Study of seed-germination and etiolation of seedlings in Emilia-sonchifolia (l) dc and Emilia-fosgerbii nicolson (Asteraceae)

The germination of seeds of Emilia sonchifolia (2n) and E. fosgerbii (4n) was analysed and our results indicate that the former present light insensitive seeds and the latter germinated only under continuous white light. The germination of seeds under shade light presented no differences between both species, However under continuous white light, which maintain 70% of Pfr, the velocity of germination was greater in Emilia sonchifolia when compared to Emilia fosbergii, indicating that the threshold of 4n seeds were greater than 2n seeds. The analysis of the fluence response curves for etiolating process indicated that the process presented no differences between both species. The same was observed for the effect of the shade light in the etiolating process.

Seed dispersal and germination of Cryptocarya moschata Nees & Martius Ex Nees, Ocotea catharinensis Mez and Endlicheria paniculata (Sprengel) Macbride (Lauraceae)

Data of seed dispersal and germination of the studied species are presented, comparing both observations from the wild and nursery. Fruits were collected from Carlos Botelho State Park (24 degrees 44' to 24 degrees 03'S, 47 degrees 46' to 48 degrees 10'W), south of São Paulo State, Brazil. O. catharinensis had low germination percentage, both in the wild and in nursery, and did not tolerate seed storage at low temperature. In nursery, diaspores with removed mesocarp of E. paniculata presented greater germination than those in entire fruits. The high levels of seedling mortality beneath mother-trees of C. moschata, when in comparison to those observed to established seedlings from diaspores dispersed by muriquis (Brachyteles arachnoides E. Geoffroy 1806, Cebidae, Primates), allied to the absence of juveniles in the understory, are in accord with the escape model of Janzen-Connel. In nursery, diaspores of C. moschata dispersed by the primates had greater germination, in smaller time, than those collected from mother-trees.

Seed size and genotype effects on maize (Zea mays L.) yield under different technology levels

Final plant population in maize crop was used as a basis to identify the technology level of a given farmer. Final population of 50,000 plants/hectare was considered as an indication of a high technology level farmer; 35,000 of a medium, and 20,000 of a low technology level farmer. These populations were artificially obtained for the hybrids HT-2X, BR-201, and BR-205 from small, medium and large seeds. The results showed the triple cross hybrid HT-2X to be the most indicated for low technology level regions, due to its lesser sensitivity to variations in seed size and also to its significant outyielding of the other two hybrids. The double cross hybrids BR-201 and BR-205 exhibited much higher sensitivity to variations in seed size so that if they have to be used in a low technology region, the most recommended procedure would be to make use of the largest possible seeds. In conclusion, genotype and seed size seem to be factors capable of compensating for plant population reductions in maize crops. The more prolific hybrids and the largess seeds are more indicated for low technology level regions.

Evaluation of color removal and degradation of a reactive textile azo dye on nanoporous TiO2 thin-film electrodes

The feasibility of the photobleaching of a textile azo dye, reactive orange 16 (C.I. 17757), in aqueous solution using titanium dioxide thin-film electrodes prepared by the sol-gel method was investigated. The best conditions for maximum photoelectrocatalytic degradation were found to be pH > 10 for Na2SO4 medium and pH < 6 for NaCl. In both situations, an applied potential of +1.0 V and low dye concentration are recommended, when 100% of color removal is obtained after 20 min of photoelectrocatalysis. The effects of side reaction pathway on the degradation rate of dye in sulfate and chloride medium were presented and the best performance are optimized to situations closed to that verified in the textile effluent. The influence of variables as applied potential, pH, supporting electrolyte and dye concentration on the kinetics of photoelectrochemical degradation also were investigated. Oxalic acid is identified by HPLC and UV-Vis spectrophotometric methods as the main degradation product generated after 180 min of photoelectrocatalysis of 4 x 10(-5) mol l(-1) dye in sodium sulphate pH 12 and NaCl pH 4.0 and a maximum reduction of 56 and 62% TOC was obtained, respectively. (C) 2004 Elsevier Ltd. All rights reserved.

Peanut seed tegument is affected by liming and drying method

Calcium plays a fundamental role in cell division and growth, and is an important constituent of the cell wall. An increase in Ca concentration in the tegument of peanut (Arachis hypogea L.) seeds in response to lime application can affect its structure. The tegument structure can also be affected by the drying method of the seeds. The effects of lime application and drying methods as affecting the peanut seed tegument structure were studied in seeds from a field experiment conducted in Sao Manuel, São Paulo, Brazil. Peanut (cv. Botutatu, Valencia Type) was grown in presence or absence of 2.1 Mg ha(-1) of lime and dried in an oven, in shade and in the field. The tegument anatomical features were described and its structure was analysed. Pectic substances, lipidic reserves and starch accumulation were studied. The peanut tegument exhibited well differentiated exotesta, mesotesta and endotesta rich in pectates and covered by a cuticle. Tannin was not observed but there was lipid accumulation in mature teguments. Lignin was observed in the vascular bundles. Lime increased the tegument thickness and decreased the central cavity mainly in the exotesta cells when the period of seed drying was shortened. The effect of drying method upon the tegument was more noticeable in seeds grown without lime. It can be inferred that liming increased the resistance of the tegument.

Comparison between gutta-percha and Resilon removal using two different techniques in endodontic retreatment

This study compared the remaining filling material and working time when removing gutta-percha/AH 26 and Resilon/Epiphany from root filled extracted teeth. The root fillings were removed using chloroform and two different rotary systems (K3 and Liberator files). The amount of residual filling material on the canal walls was imaged and measured using image analyzer software. The group filled with Resilon/Epiphany and retreated with K3 files demonstrated the least residual filling material on the walls (p < 0.05). There was no statistically significant difference between the guttapercha/AH26 and Resilon/Epiphany groups when the Liberator files were used (p > 0.05). In the groups filled with Resilon/Epiphany, the filling was removed faster than groups filled with gutta-percha/AH 26 (p < 0.05). K3 rotary system was faster than Liberator to remove both gutta-percha and Resilon (p < 0.05). Resilon/ Epiphany was effectively removed with K3 or Liberator rotary files.

Effect of exercise mode on the blood lactate removal during recovery of high-intensity exercise

The aim of this study was to determine the effect of exercise mode on the blood lactate removal during recovery of high-intensity exercise. Nine male individuals performed the following tests in order to determine the blood lactate removal: Running - 2x200 m, the subjects ran at their maximum capacity, and rested 2 min between each bout. Swimming - 2x50 m, the subjects swam at their maximum capacity, and rested 2 min between each bout. Each test was realized on different days with three recovery modes: passive (sitting down), swimming, or running. Recovery exercise intensity was corresponding to the aerobic threshold. All recovery activities lasted 30 min. The two forms of active recovery were initiated 2 min after the end of high-intensity exercise and lasted 15 min, and were followed by 13 min of seated rest. After 1,7, 12,17, and 30 min of the end of high-intensity exercise, blood samples (25 mu l) were collected in order to determine the blood lactate concentration. By linear regression, between the logarithm of lactate concentration and its respective time of recovery, the half-time of blood lactate removal (t1/2) was determined. Time of high-intensity exercise and the lactate concentration obtained in the 1(st) min of recovery were not different between running and swimming. Passive recovery (PR) following running (R-PR=25.5+/-4.3 min) showed a t1/2 significantly higher than PR after swimming (S-PR=18.6+/-4.3 min). The t1/2 of the sequences running-running (R-R=13.0 min), running-swimming (R-S=12.9+/-3.8 min), swimming-swimming (S-S=13.2+/-2.8 min), and swimming-running (S-R=12.9+/-3.8 min) were significantly lower than the t1/2 of the R-PR and S-PR. There was no difference between the t1/2 of the sequences R-R R-S, and S-S. on the other hand the sequence S-R showed a t1/2 significantly lower than the sequences S-S and R-R. It was concluded that the two forms of active recovery determine an increase in the blood lactate removal, regardless of the mode of high-intensity exercise performed previously. Active recovery performed by the muscle groups that were not previously fatigued, can improve the blood lactate removal.