A split-mouth randomized clinical trial of conventional and heavy flowable composites in class II restorations

Objective: The aim of this study was to evaluate the 2-year clinical performance of class II restorations made with a composite resin with two different viscosities.Methods: 47 patients received two class II restorations (n = 94), one made with GrandioSO (conventional viscosity CV), and the other with GrandioSO Heavy Flow (flowable viscosity FV), subjecting both materials to the same clinical conditions. The self-etching adhesive Futurabond M was used for all restorations. The composites were inserted using the incremental technique. The restorations were evaluated using the modified USPHS criteria according to the periods: baseline, 6 months, 1 year and 2 years after restorative procedures.Results: After 24 months, 40 patients attended the recall and 78 restorations were evaluated. In all periods, no secondary caries was observed. After 6 months, there were slightly overall changes of scores for most parameters. After 24 months, the higher number of changes from score Alfa to Bravo was observed for marginal discolouration (32.5% CV and 39.5% FV) and colour match (15% CV and 31.6% FV), followed by proximal contact (25% CV and 23.7% FV) and marginal adaptation (20% CV and 21.1% FV). For wear, surface texture and postoperative sensitivity the changes were very small. Just two restorations were lost during the 24-month follow up. Less than 5% of all restorations showed postoperative sensitivity. Chi-square test showed no significant differences between the two materials for all parameters analysed.Conclusion: After 2 years of clinical service, no significant differences were observed between GrandioSO conventional and GrandioSO Heavy Flow for the parameters analysed. Both materials provided acceptable clinical behaviour in class II restorations. Clinical Significance: This study presents the possibility of using a flowable composite with high filler content, for performing class II restorations. (C) 2014 Elsevier Ltd. All rights reserved.

Efficacy of fipronil (1.0 mg/kg) against Rhipicephalus (Boophilus) microplus strains resistant to ivermectin (0.63 mg/kg)

The present study aimed to evaluate the efficacy of fipronil (1 mg/kg) against three strains of ivermectin-resistant Rhipicephalus (Boophilus) microplus (R. (B.) microplus), naturally infesting cattle from different states of Brazil. Three rural properties with a history of macrocyclic lactones ineffectiveness against the cattle tick, and low frequency use of fipronil in the herd, were selected for the study. The animals were randomized according to the mean tick counts, performed on days 3, 2 and I, into three groups with 10 animals each: T01, control (saline solution); T02, subcutaneous ivermectin (0.63 mg/kg) and T03, topical fipronil (1 mg/kg). Treatment was performed on day 0. Counts of partially engorged female ticks were performed on days 3,7 and 14 post-treatment (DPT), and then every 7 days until the 49th DPT. In all three experiments, it was possible to diagnose resistance of R. (B.) microplus to ivermectin (0.63 mg/kg). The maximum efficacy (arithmetic mean) obtained for ivermectin was 64% in experiment II. On the other hand, the formulation containing fipronil (1 mg/kg) reached high efficacy values (>= 97%) in all three experiments. The results from all experiments in this study demonstrate the high efficacy of 1 mg/kg fipronil, administered pour-on in naturally infested cattle, against strains of R. (B.) microplus that are resistant to 630 mcg/kg ivermectin. (C) 2014 Elsevier B.V. All rights reserved.

Effects of laser beam energy on the pulsed Nd:YAG laser welding of thin sheet corrosion resistant materials

The aim of this study was to value the possibility to join, for pulsed Nd:YAG laser welding, thin foils lap joints for sealing components in corrosive environment. Experimental investigations were carried out using a pulsed neodymium: yttrium aluminum garnet laser weld to examine the influence of the pulse energy in the characteristics of the weld fillet. The pulse energy was varied from 1.0 to 2.5 J at increments of 0.25 J with a 4 ms pulse duration. The base materials used for this study were AISI 316L stainless steel and Ni-based alloys foils with 100 mu m thickness. The welds were analyzed by electronic and optical microscopy, tensile shear tests and micro hardness. The results indicate that pulse energy control is of considerable importance to thin foil weld quality because it can generate good mechanical properties and reduce discontinuities in weld joints. The ultimate tensile strength of the welded joints increased at first and then decreased as the pulse energy increased. In all the specimens, fracture occurred in the top foil heat-affected zone next to the fusion line. The microhardness was almost uniform across the parent metal, HAZ and weld metal. A slight increase in the fusion zone and heat-affected zone compared to those measured in the base metal was observed. This is related to the microstructural refinement in the fusion zone, induced by rapid cooling of the laser welding. The process appeared to be very sensitive to the gap between couples.

Indicators of the risk mechanics for Class-I and Class-II amalgam and composite resin restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reduced susceptibility to vancomycin and biofilm formation in methicillin-resistant Staphylococcus epidermidis isolated from blood cultures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interfacial integrity of low-shrinkage composite restorations related to the filling technique and consistency

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Methicillin-resistant Staphylococcus aureus of lineage ST398 as cause of mastitis in cows

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molecular analysis of community-acquired methicillin-resistant Staphylococcus aureus isolated from skin and soft tissue infections, Botucatu Medical School, Brazil

Community acquired methicillin Staphylococcus aureus (CA-MRSA) was first reported in 1981, infecting people without risk factors. These strains harbor the Staphylococcal Cassette Chromosome mec (SCCmec) type IV, which contains the mecA gene codifying for methicillin resistance. CA-MRSA strains usually carry PVL (Panton-Valentine Leukocidin), a virulence factor responsible for tissue invasion, causing systemic infections and leading to serious complications. The aims of this work were to detect the mecA gene, SCCmec characterization and to detect the PVL gene of the S. aureus strains isolated from patients diagnosed with skin and soft tissue infections attending the Dermatology Service, of the Botucatu Medical School, Brazil. Among 127 collected samples, 66 (51.9%) were S. aureus and, from these, 7 (10.6%) harbored mecA gene, 3 (42%) with cassette type IV, and none of these samples carried the PVL gene, but it was detected in 10 (15.1%) samples of S. aureus methicillin sensitive (MSSA). Our study suggests the S. aureus strains that harbor PVL gene and MRSA are present in the community as important pathogens.

Repair Technique for Fractured Implant-Supported Metal-Ceramic Restorations: A Clinical Report

The fracture of porcelain structures have been related in either natural dentition or implant-supported restorations. Techniques using a composite resin or indirect methods can be used. This article presents a porcelain fracture on implant-supported metal-ceramic restoration. IPS Empress e.max laminate veneer restoration was used to repair the fracture. With this technique, it was possible to restore aesthetics and function, combined with low cost and patient satisfaction.

Seven-Year Clinical Performance of Resin Composite Versus Resin-Modified Glass lonomer Restorations in Noncarious Cervical Lesions

Purpose: The purpose of this study was to comparatively assess the seven-year clinical performance of a one-bottle etch-and-rinse adhesive with resin composite (RC) and resin-modified glass ionomer (RMGI) restorations in noncarious cervical lesions.Methods and Materials: One operator placed 70 restorations (35 restorations in each group) in 30 patients under rubber dam isolation without mechanical preparation. The restorations were directly assessed by two independent examiners, using modified US Public Health Service criteria at baseline and 6, 12, 24, 60, and 84 months. The obtained data were tabulated and statistically analyzed using the Fisher and McNemar tests. A difference was significant if p<0.05.Results: Twenty patients were available for recall after seven years (66.6%), and 25 RC and 26 RMGI restorations out of 70 restorations were evaluated. Excellent agreement was registered for all criteria between examiners (kappa >= 0.85). Alfa and bravo scores were classified as clinically acceptable. The McNemar test detected significant differences within RC restorations between baseline and seven-year evaluations for anatomic form, marginal integrity, and retention (p<0.05). For RMGI restorations, a significant difference was identified for marginal integrity (p<0.05). As to material comparison, the Fisher exact showed a better retention performance for RMGI restorations than for RC restorations (p<0.05). Twelve composite restorations were dislodged (52.0% retention) and three ionomer restorations were lost (88.5% retention). The cumulative success rate for RC and RMGI was 30% and 58.1%, respectively.Conclusions: After seven years of service, the clinical performance of RMGI restorations was superior to that of the adhesive system/resin composite restorations in this study.

Risk factors for the acquisition of imipenem-resistant Acinetobacter baumannii in a burn unit: An appraisal of the effect of colonization pressure

Imipenem-resistant Acinetobacter baumannii (IRAB) is a major threat for critically ill patients, including those admitted to burn units. Recent studies have suggested that colonization pressure (the proportion of patients or patient-days harbouring the pathogen of interest) is an important driver of the risk for acquisition of multidrug-resistant organisms. With that in mind, we conducted a cohort study, enrolling 208 patients admitted to a burn unit from November 2008 through December 2009. The outcome of interest was the acquisition of IRAB. In addition to the usual risk factors, we assessed the impact of colonization pressure. The number of wound excisions (odds ratio (OR) 12.06, 95% confidence interval (CI) 2.82-51.64) and the number of antimicrobials used (OR 22.82, 95% CI 5.15-101.19) were significant risk factors for the outcome of interest. On the other hand, colonization pressure (measured for whole time of exposure or up to the last 14, 7, or 3 days) was not associated with the risk for IRAB acquisition.

Effect of thermo-mechanical load cycling on silorane-based composite restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamics of biofilm formation and the interaction between candida albicans and methicillin-susceptible (MSSA) and -resistant staphylococcus aureus (MRSA)

Coordenação de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)

Planning and clinical strategy in direct composite restorations

Patients are seeking increasingly the expertise of dental surgeons for esthetic dental improvement. The dental surgeons should know the restorative materials and techniques in order to optimize the clinical practice and to obtain satisfactory results. Also the dentist should know the average heights and widths of the anterior teeth to detect the esthetic disharmony and to eliminate it for reproducing the correct dental anatomy. Thus, this study aimed to describe a clinical case report of direct restoration using the palatal barrier technique.