Chromatic changes to artificial irises produced using different techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bond Strength of Different Resin Cement and Ceramic Shades Bonded to Dentin

Purpose: To evaluate the microtensile bond strength (MTBS) of ceramic cemented to dentin varying the resin cement and ceramic shades.Materials and Methods: Two VITA VM7 ceramic shades (Base Dentine 0M1 and Base Dentine 5M3) were used. A spectrophotometer was used to determine the percentage translucency of ceramic (thickness: 2.5 mm). For the MTBS test, 80 molar dentin surfaces were etched and an adhesive was applied. Forty blocks (7.2 x 7.2 x 2.5 mm) of each ceramic shade were produced and the ceramic surface was etched (10% hydrofluoric acid) for 60 s, followed by the application of silane and resin cement (A3 yellow and transparent). The blocks were cemented to dentin using either A3 or transparent cement. Specimens were photoactivated for 20 s or 40 s, stored in distilled water (37 degrees C/24 h), and sectioned. Eight experimental groups were obtained (n = 10). Specimens were tested for MTSB using a universal testing machine. Data were statistically analyzed using ANOVA and Tukey's post-hoc tests (alpha <= 0.05).Results: The percentage translucency of 0M1 and 5M3 ceramics were 10.06 (+/- 0.25)% and 1.34 (+/- 0.02)%, respectively. The lowest MTBS was observed for the ceramic shade 5M3. For the 0M1 ceramic, the A3 yellow cement that was photocured for 20 s exhibited the lowest MTBS, while the transparent cement that was photocured for 40 s presented the highest MTBS.Conclusions: For the 2.5-mm-thick 5M3 ceramic restorations, the MTBS of ceramic cemented to dentin significantly increased. The dual-curing cement Variolink II photocured for 40 s is not recommended for cementing the Base Dentine 5M3 feldspathic ceramic to dentin.

Silica-based Nano-coating on Zirconia Surfaces Using Reactive Magnetron Sputtering: Effect on Chemical Adhesion of Resin Cements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The potential of novel primers and universal adhesives to bond to zirconia

Objectives: To investigate the adhesive potential of novel zirconia primers and universal adhesives to surface-treated zirconia substrates.Methods: Zirconia bars were manufactured (3.0 mm x 3.0 mm x 9.0 mm) and treated as follows: no treatment (C); air abrasion with 35 mu m alumina particles (S); air abrasion with 30 mu m silica particles using one of two systems (Rocatec or SilJet) and; glazing (G). Groups C and S were subsequentially treated with one of the following primers or adhesives: ZP (Z-Prime Plus), AZ (AZ Primer); MP (Monobond Plus); SU (ScotchBond Universal) and; EA (an Experimental Adhesive). Groups Rocatec and SilJet were silanized prior to cementation. Samples form group G were further etched and silanized. Bars were cemented (Multilink) onto bars of a silicate-based ceramic (3.0 mm x 3.0 mm x 9.0 mm) at 90 degrees angle, thermocycled (2.500 cycles, 5-55 degrees C, 30 s dwell time), and tested in tensile strength test. Failure analysis was performed on fractured specimens to measure the bonding area and crack origin.Results: Specimens from group C did not survive thermocycling, while CMP, CSU and CEA groups survived thermocycling but rendered low values of bond strength. All primers presented a better bond performance after air abrasion with Al2O3 particles. SilJet was similar to Rocatec, both presenting the best bond strength results, along with SMP, SSU and CEA. G promoted intermediate bond strength values. Failure mode was predominately adhesive on zirconia surface combined to cohesive of the luting agent.Conclusions: Universal adhesives (MP, SU, EA) may be a considerable alternative for bonding to zirconia, but air abrasion is still previously required. Air abrasion with silica particles followed by silane application also presented high bond strength values. (C) 2013 Elsevier Ltd. All rights reserved.

Comparative analysis of two techniques for detection and segmentation of moving bodies

This paper makes a comparative analysis of results produced by the application of two techniques for the detection and segmentation of bodies in motion captured in images sequence, namely: 1) technique based on the temporal average of the values of each pixel recorded in N consecutive image frames and, 2) technique based on historical values associated with pixels recorded in different frames of an image sequence.

Translocação de zinco e crescimento radicular em milho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O turismo como alternativa de renda no município de Rancharia

This present work talk about the tourism and the historic evolution of this conception, also it brings some thoughts about the increase of the tourism activity in the all around the world. The territorial slash study is in Rancharia, the research the shows aspect of localization, description, natural and socials. During this work was introduced a study about the most important programs and projects that were initiate in the country by the public authorities with the focus in the tourism development, and also was noted the current tendency in the formation of intermunicipal consortium that has the aim to develop the activity of the regional tourism. It was presented the mains tourism attractions in the municipal district, such as, municipal watering- place. To develop this current work it was made some researches by the application of a formulary to the tourist, and the interview was made by representatives of the private and public sector, which was exposed their vision about the activity tourism development and the importance of the municipal district participation in the public politics that is turned to the tourism. The work concludes that the tourism activity could come to turn one alternative of job and lacework to the city, but is necessary that develop it in the base of the local tourism, that brings benefits to all the community involved in this process

Levantamento e análise de técnicas utilizadas nas operações de emergência de derramamento de óleo em ambientes costeiros e fluviais

This present paper aims to identify the main response techniques for coastal and fluvial environments and analyze impacts on the application of these techniques. The literature review allowed us to understand since the establishment of first environmental sensitivity index map, in coastal and fluvial environment, until the possible impacts generated by the application of cleanup techniques in both environments. Studies related to freshwater environment are less common compared to coastal environment. For both environments the same techniques may be employed, as well as containment and recovery, or removal of oil in the affected areas. The most serious environmental impacts generated are due to the poor choice of technique to be applied or the lack of training of the cleaning crews. In Deepwater Horizon accident, Gulf of Mexico, 2010, application of dispersants, resulted in a mixture of oil and dispersing 52 times more toxic than the oil itself. In Brazil, the technique of vegetation removal by the cleaning staff in the accident on the river Guaecá, 2004, resulted in unnecessary elimination of vegetation, increasing the volume of waste. It was concluded that the freshwater environment often suffer more impacts by applying the techniques, once is necessary to access the banks, which normally have more vegetation and organisms than shoreline of coastal environment

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid

O sintagma verbal em português: construções perifrásticas e não-perifrásticas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise morfotectônica do Planalto Ocidental Paulista, ao sul do Rio Tietê: indicadores de deformações neotectônicas na fisiografia da paisagem

Pós-graduação em Geologia Regional - IGCE

Estratégias de seleção de genótipos de soja por meio de modelos mistos e abordagens multivariadas

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Avaliação de diferentes protocolos de aplicação da terapia fotodinâmica antimicrobiana (aPDT) no tratamento da periodontite induzida em ratos imunossuprimidos com droga quimioterápica: estudo histomorfométrico, imunoistoquímico, imunológico e microbiológico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A formulação de uma corrente urbanística: uma (re)visita às teses de Anhaia Mello para São Paulo

The present article aims to elaborate an objective analytical panel, initially from the 1920- 1930 when Luiz Ignácio Romeiro de Anhaia Mello, cathedratic in the urban question, started to quote a series of authors and American plans as references to their reflections, mainly when the point was the verticalization or not at São Paulo City. From a broad bibliographic research with the systematization of the register from the debate between Anhaia Mello, this article intends to point out how the transposition of the urbanistic conceptions to the academic environment happened and, at the same time, the legal normatization of the São Paulo City that resulted in the creation of a draft of the regulations for use and occupation of the soil. The systematizations and analysis were based in a broad reading of the bibliography and documental sources that refer to the proposed theme. The books of the library of FAU-USP, specifically the one from SAGMACS – Sociedade de Análises Gráficas e Mecanográficas Aplicadas aos Complexos Sociais ( Society of Graphical Mechanical-Graphic Analysis Applied to Social Complexes) -, aiming to select papers and the collection of Anhaia Mello´s family, so that a reconstruction of the intellectual and professional journey of the Urbanism Professor. The systematization of the collected data and posterior comparison with the bibliographical study was fundamental for the reconstruction of the reflection of Anhaia Mello about the ways of the urban streets and roads at Sao Paulo City should be lead to on the middle of the XX century having as a guideline the debate between Anhaia Mello – very common on the 1950s for less important countries when dealing with the organization of the size of industrial metropolis. It was possible to identify the crystallization of one urbanistic proposal for the city: the from Anhaia Mello, that bet on the reversion of the metropolitan cycle by stopping the urban growth by the application of the theoretical conception of the garden city.

Influência da clorexidina na capacidade de umectabilidade da dentina hígida e afetada por cárie por um sistema adesivo

To evaluate the effect of chlorhexidine (CHX) on the wettability of sound and caries affected dentin by a simplified adhesive system. Material and Methods: Flat coronal dentin surfaces were produced on 60 sound molars, 30 of which were artificially decayed. The teeth were divided randomly into 3 groups (n = 10) with smear layer (SL), without SL impregnated with water and without SL impregnated with chlorhexidine. The SL removal was performed by phosphoric acid etching for 15 s. 20 uL of distilled water or 2% chlorhexidine digluconate were applied on the demineralized dentin for 60 s. Then, a drop of Single Bond 2 was deposited on each surface. Contact angles between dentin surface and adhesive was measured by means of a goniometer and data were submitted to ANOVA and Tukey tests (α = 0.05). Results: Higher contact angles were obtained on sound versus caries affected dentin (p <0.05), regardeless of the surface treatment. For both substrates, contact angles statistically higher were obtained for dentin covered with SL (P <0.05). The SL removal resulted in significant reduction of the angles (P <0.05) and no difference was found among angles produced on demineralized dentin impregnated with water or chlorhexidine (p> 0.05). Conclusion: Caries affected dentin wettability was higher than sound dentin and that characteristic was not influenced by chlorhexidine application.