Toxicidade de agroquímicos ao ácaro-da-leprose dos citros Brevipalpus phoenicis (Geijskes) e ao ácaro predador Neoseiulus californicus (McGregor) (Acari: Tenuipalpidae, Phytoseiidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Obtenção de compósitos de borracha natural com resíduo industrial de couro reticulados com diferentes peróxidos

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Síntese, caracterização e avaliação da citotoxicidade de complexos de Pd(II) contendo ligantes fosfínicos de N,S - quelantes

Pós-graduação em Química - IQ

Análise in silico de uma pirofosfatase e de uma tiosterase de uma biblioteca metagenômica de solo de Eucalipto spp

Pós-graduação em Microbiologia Agropecuária - FCAV

Aplicações de um potencial reativo no estudo da interação entre moléculas e superfícies bidimensionais

In materials science, the search for technological improvements have become one of the main subject of study of researchers. This is especially true in the case of materials with reduced sizes, in the nanometer scale. Important phenomena to be studied in these cases are the desorption and adsorption on two-dimensional materials, such as graphene. These phenomena are of great importance in the study of interactions between organic films, synthesis or catalysis of reactions on surfaces and even in the creation of nanoscale devices [1, 2, 3, 4]. Between the most important topics related to these phenomena are the storage of gases in low-dimensional systems and the study of nanostructured fuel cells or batteries. In this context we used two different parametrizations for the reactive force field ReaxFF to study the potential barriers and reaction barriers of our system. First we made a study about the Reaction Barriers and Energy Barriers for bonds between graphene and the following atoms: sulfur, fluorine, hydrogen, nitrogen and oxygen. It is important to have this information in order to make it possible to understand how these atoms react with the graphene sheet. Subsequently, we calculate reaction barriers for mixed structures where fluorine is a fixed element bonded to graphene and other element is simultaneously bonded to graphene. This other element (N, O, H or S) is varied in its possible relative positions (ortho, meta and para in relation to fluorine in either: the same side and in the opposite side of the graphene membrane)

Determinação de metais em água produzida de petróleo

In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies

Rerrefino de óleo lubrificante usado

The lubricant oil used in engines of internal combustion must be, periodically, changed. Its mainly function in the engines is to reduce the friction between the pieces, but its presence also promotes the cleanness and the refrigeration of the equipment. These attributions, at the end of some cycles of operation, make the oil to be dirty, that is, full of contaminating substances such as water, gasoline, diesel, additives, oxidized hydro-carbons and rests of metals, not being recommended, therefore, its discarding in the environment. Thus, all the used lubricant oil that leaves the automobiles engine has been thrust, waiting for a solution. The pollution generated by the discarding of a ton of used oil per day in the soil or in the rivers is equivalent to a domestic sewer of 40 thousand of people. The indiscriminate burning of the used lubricant oil generates significant emissions of metallic oxides, besides other toxic gases, like the dioxin and sulphur oxides. In this context, the mean objective of this essay was to effectuate the rerrefine of the used lubricant oil, aiming the increase of its life cycle and consequently contributing for the reduction of the environmental pollution. According to the used process, it was possible to get a rerrefine oil, of good quality, which physicistchemistries properties are in compliance with the norms of NBR and ASTM

Influência de bioestimulante no desenvolvimento de plantas de pepino japonês enxertadas e não enxertados em condições de ambiente protegido

The aim of this experiment was evaluate the effect of the bioestimulant administered in grafted and non-grafted japanese cucumber (Cucumis sativus L.) plants, under greenhouse conditions, in gas exchanges during the development of the plant and in the increase of yield. The experiment was carried out in the experimental area of Agronomic Sciences University of UNESP, Campus of Botucatu, São Paulo State, Brazil. The experiment design was completely randomized, in a factorial arrangement of 2x5, grafted and non-grafted plants and 5 treatments with bioestimulant: control, indolbutyric acid 0,0005% + citocinine 0,0009% + gibberelic acid 0,005% 250 mL ha-1; indolbutyric acid 0,0005% + citocinine 0,0009% + gibberelic acid 0,005% 375 mL ha-1; indolbutyric acid 0,0005% + citocinine 0,0009% + gibberelic acid 0,005% 500 mL ha-1; Yuca extract (Yucca elephantipes) + manganese + iron + copper + sulfur 375 mL ha-1 applied 15 days after the transplant, in intervals of 7 days between the applications, via leaf. The effect of the treatments were evaluated through the observations of the following characteristics: production of fruits (number and mass), average mass of the fruit and measures of gas exchanges. It can be concluded that indolbutyric acid 0,0005% + citocinine 0,0009% + gibberelic acid 0,005% 250 mL ha-1 increased CO2 assimilation rate and the water efficiency, influencing in addition to increase the quantity of the fruits

Uso das técnicas de difusão em filmes finos por gradiente de concentração (DGT) para avaliação de metais disponibilizados em passivos de mineração de Urânio

The objective of this work is to use the technique of diffusion by concentration gradient films (DGT) for evaluation of dissolved urano in hydro bodies. For this we chose this work as a systems investigation of water bodies in the region of Poços de Caldas, state of Minas Gerais, because, there is a large amount of mining of uranila. The technique to be used to evaluate the potential for dissolved metals analysis involves the use of passive samplers with application in in situ. This allows detection with excellent sensitivity and selectivity allowing the determination of the labile fraction of dissolved metals

Determinação de manganêsem águas no entorno de minerações de urânio

The studies of this work aimed to determine the labile fractions of manganese (Mn) in natural and drainage water samples collected around the Osamu Utsumi uranium mine, located in the municipality of Caldas, south-central region of Poços de Caldas- MG, using the technique of diffusion gradient in thin films (DGT). The DGT devices were mounted with Chelex-100 resin, polyacrylamide-agarose hydrogel (conventional porosity) and cellulose acetate membrane. The device were deployed up to 48 hours in six water samples collected from different areas around the uranium mine (075, 076, 022-E, 025-E, 014, and 041). The DGT devices immersed in each sample were gradually removed after 4, 8, 12, 24 and 48 hours. The pH of the samples ranged from 3.0 to 10.5, which influenced the lability and the sampling of the analyte by the Chelex-100 resin. The results showed a linear relationship between accumulated mass and sampling time (immersion curve) for samples 014 and 025-E (pH between 6 and 8) suggesting the ability of the DGT technique for sampling the analyte. The results obtained for samples 075 and 076 (pH<5) and samples 041 and 022-E (pH around 10) were characterized by nonlinear relationships. The values obtained by DGT were compared with Solid Phase Extraction (SPE) technique using Chelex-100. For samples 014 and 025-E, there was a good agreement between the results obtained by both techniques

Determinação de Cd, Cu, Ni, Pb e Zn em águas marinhas oriundas da Bacia Potiguar utilizando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

The DGT technique has been used to determine and better understand the dynamics and bioavailability of metals in the sea near to marine outfalls. In this work, the DGT was assessed for the determination of Cd, Pb, Cu, Zn and Ni in marine water samples from Potiguar Basin in its conventional aspect (binding agent, Chelex-100 and diffusive agent: Diffusive polyacrylamide gel (D) and restrictive (R)) and determination of Pb and Cd through its alternative aspect (binding agent: Saccharomyces cerevisiae immobilized in agarose gels and diffusive agent: 3MM Chromatography Paper). The deployment curves for long periods of immersion in the sample, showed a good linear correlation for the conventional aspect to Zn (D: R²=0.9586, R: R²=0.9444), Ni (D: R²=0.9789, R: R²=0.9286) and Cu (D: R²=0.764, R: R²=0.8143), and alternative to Pb (R²=0.9228) and Cd (R²=0.9673). The results of the organic and inorganic composition analysis in conventional aspect, showed that for every element there is no significant fraction of organic compounds in the sample. In addition, considering the alternative aspect, the comparison of obtained and expected masses suggests that some of the Pb is not labile and that the main retention mechanism of Pb for S. Cerevisiae occurs through ion exchange

Espectrometria de massa para análise isotópica dos bio-elementos

Mass spectrometry is an analytical technique widely used in several areas of academic research. It allows the knowledge of the information about the micro-world of atoms leading to significant advances in science today. The analysis of stable isotopes of carbon, hydrogen, oxygen, nitrogen and sulfur, also known as bio-elements, shows itself as a major area of interest in using the proposed method. The development of techniques and equipment coupled with mass spectrometry promises to deliver even greater progress in this field, in particular, for the biological sciences and related areas. The pyrolytic method in reduction of organic compounds at high temperatures provides simultaneous isotopic analysis of bio-elements H and O, by the gases released, H2 and CO after the pyrolitic process, significantly reducing analysis time and the amount of material to sample. This paper presents a review of mass spectrometry with its basic principles of operation, and pyrolytic method for reducing compounds at temperatures above 1400 ° C for isotopic analysis of bio-elements

Poluição atmosférica e paisagem urbana no município de São Paulo

This paper proposes an analysis of two major polluting elements of the atmosphere of São Paulo city, carbon monoxide (CO) and sulfur dioxide (SO2). This study was performed through analysis of data on the quality of air, by means of published reports and records obtained by experiment using measuring rate monitor for CO2. Atmospheric data were collected and sorted. From this work it was possible to identify the concentration of carbon dioxide in the center of São Paulo on September 14, 2012 using the infrared gas analyzer (IRGA). From the ratios of carbon monoxide and sulfur dioxide spatially analyzed could identify major emitters by comparing records of pollutants and their origin. The analysis makes it possible to map the intensity of air pollution in urban areas, identifying the polluting elements, their issuers and thereby contributes to the current understanding of atmospheric features, bringing a geographical spatial analysis of air pollutants in São Paulo, contributing to awareness of vulnerabilities, enabling a useful tool for planning and maintenance of the urban environment related public policies

Avaliação da membrana P81 como agente ligante da técnica de difusão em filmes finos por gradiente de concentração (DGT) para determinação de mercúrio em sistemas aquáticos

Worldwide environmental degradation is an undesirable byproduct resulting from the increasing demand for natural resources. Water sources are suffering intense contamination since they usually receive a huge amount of domestic and industrial effluents - which are mostly wasted without proper treatment - inserting a large number of pollutants in the environment, heavy metals included. Mercury holds great toxicological importance because, under some physicochemical conditions in a water environment, Hg (II) ion turns into methylated compounds stemming from this element, such as methylmercury CH3Hg, which is highly toxic for the aquatic community in which bioaccumulation occurs. Nowadays passive sampling techniques are being developed to enable the analytical procedures which are applied in environmental monitoring. Diffusive gradients in thin-films technique (DGT) has been proven an interesting tool for the determination of labile metal species due to its in situ application. The DGT technique consists of a piston-like device on which the following series of agents is disposed: a binding agent (conventionally Chelex 100 resin), a diffusive agent, usually a polyacrylamide gel, and a membrane filter. Nevertheless, the agents conventinally used for this technique don't usually show satisfactory results in mercury sampling. The main goal of this study was to evaluate the phosphate-treated cellulose membrane (Whatman P 81), an alternative material, as binding agent in the DGT to determine labile mercury fractions in aquatic systems. In this context, we conducted a study of the behavior of this material in relation with system variables, pH and ionic strength. Afterwards we performed immersions of the DGT devices in real and enriched samples and in situ aiming the determination of mercury

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island