Moringa extracts used in sugarcane juice treatment and effects on ethanolic fermentation

The objective of this study was to evaluate the effects of sugarcane juice treatment using Moringa oleifera leaf and seeds extracts on ethanolic fermentation. The experiment was arranged in a split plot statistical design, with four replications. Main treatments were three sedimentation agents (synthetic polyelectrolyte, moringa leaf and seed extracts) and control while the secondary treatments were two sugarcane varieties (RB867515 and CTC4). Extracted sugarcane juice was clarified by simple defecation with pH adjusted to 6.0. The flocculating agents were added in a decanter before the limed juice. After then, the juice was standardized to 16° Brix at pH 4.5, and musts were inoculated with yeast Saccharomyces cerevisiae strain, FT858. At the end of the fermentation process, wines were recovered by centrifugation. In all experimental stages, extracted juice, clarified juice and wine were chemically and technologically characterized. The use of moringa leaf and seed extracts as sedimentation adjuvants did not increase the sedimentation speed of impurities. However, there was a high sludge compaction, which was essential for maintenance of yeast and bud population at the beginning of fermentation, and yeast budding rate in the end. The use of different sedimentation agents as adjuvants in juice treatment did not affect wine quality and ethanol yield.

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Efeito dos parâmetros de retificação no acabamento superficial de cerâmicas aplicadas à biomateriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temperaturas de armazenamento e uso de soluções de manutenção na pós-colheita de gérberas vermelhas

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Inclusão de cana-de-açúcar triturada em biodigestores abastecidos com dejetos de bovinos de corte confinado

The objective of this study was toevaluatethe effect of the co-digestion of triturated sugarcane with beef cattlerfeddlotmanure in continuous digestorsin the amount and quality of biogas and biofertilizer. To do so, the work was divided in three steps. The first and the second part lasted30 days each and evaluated the effect of the additionof 7% of triturated sugarcane in agreement with the followingtreatments:treatment, the digestors were supplied with a mixture of 0,250 kg of manure and 1,750 kg of water ;treatment 2, the digestors were supplied with a mixture of 0,250 kg of manure, 1,610 kg of water, and 0,140 kg of triturated sugarcane. To The third period lasted 30 days and evaluated the effect of adding 3.5% of sugarcane crushed. The data analyses was performed with randomized designusing SAS®program with level of significance of 5%. The digesters with sugarcane produced in the first period respectively 0.79, 0.0127, and 0.102 m3of total production, of biogas production per kilogram of substrate, and of total production per kilogram of manure versus 0.5, 0.0081, and 0.065 m3from the control treatment, respectively..In the thirdperiod,each variable had a total production of 0.76, 0.123, and 0.98 m3and the control treatment yielded 0.51, 0.065, and 0.0082 m3.In the second period,the total production per kilogram of solidand of volatile solids added were higher in the digesters without sugarcane (0.0093 and 0.438 m3) when compared to the digesters that had additionof 7% of cane(0.271 and 0.336 m3).

Imagens aéreas multiespectrais na identificação de zonas de manejo em áreas de algodão para aplicação localizada de insumos

Crop yield is influenced by several factors with variability in time and space that are associated with the variations in the plant vigor. This variability allows the identification of management zones and site-specific applications to manage different regions of the field. The purpose of this study was the use of multispectral image for management zones identification and implications of site-specific application in commercial cotton areas. Multispectral airborne images from three years were used to classify a field into three vegetation classes via the Normalized Difference Vegetation Index (NDVI). The NDVI classes were used to verify the potential differences between plant physical measurements and identify management zones. The cotton plant measurements sampled in 8 repetitions of 10 plants at each NDVI class were Stand Count, Plant Height, Total Nodes and Total Bolls. Statistical analysis was performed with treatments arranged in split plot design with Tukey’s Test at 5% of probability. The images were classified into five NDVI classes to evaluate the relationship between cotton plant measurement results and sampling location across the field. The results have demonstrated the possibility of using multispectral image for management zones identification in cotton areas. The image classification into three NDVI classes showed three different zones in the field with similar characteristics for the studied years. Statistical differences were shown for plant height, total nodes and total bolls between low and high NDVI classes for all years. High NDVI classes contained plants with greater height, total nodes and total bolls compared to low NDVI classes. There was no difference in Stand Count between low and high NDVI classes for the three studied years. The final plant stand was the same between all NDVI classes for 2001 and 2003 as it was expected due to the conventional seeding application with the same rate of seeds for the entire field.

Desempenho de discos de corte de semeadora-adubadora em diferentes quantidades de cobertura vegetal

The quality and efficiency in straw cutting are determinants in the sowing process, according to the occurrence of "tamp" and stops, the magnitude of the straw removal or even the known effects of the seed "envelopment" where the cutting mechanism can not cut the remaining straw. Thus, the objective of this study was to evaluate the performance of different mechanisms for straw cutting of a seeder individualized in different amounts of crop coverage artificially added in a clay soil. The experiment was conducted at Unesp – Sao Paulo State University in the Experimental Farm Lageado, belonging to the College of Agricultural Sciences - Unesp, Botucatu. The experimental design was split plot with four replications, with main plots consisting of five quantities of black oat straw, in area with no-tillage system and subplots of three opening furrows mechanisms, which are: plane disk (PD), corrugated disk (CD) and wavy disk (WD). The wavy disk provided greater rolling resistance, reducing the speed of the set (tractor and equipment). The plane cutting disk showed the highest values of mobilized soil area, deeper penetration into the soil, requiring lower values of vertical force and higher values of lateral force. Regarding the type of waste and doses used, they offered no resistance to cutting and there was no change in the horizontal force on straw.

Fatores de risco relacionados à perda de produtividade laboral e aumento dos custos ambulatoriais de pacientes atendidos por unidades básicas de saúde

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de conídios do fungo entomopatogênico Metarhizium anisopliae em diferentes condições de cultivo e em biorreator de bandeja

Pós-graduação em Microbiologia - IBILCE