217 resultados para Vulgaris L


Relevância:

60.00% 60.00%

Publicador:

Resumo:

No tillage management is widely used by the Brazilian farmers and technicians like a soil conservation system, which reduces the soil losses by water erosion, increasing the infiltrated and stored water in soil, warranting environmental sustainability. No-tillage system does not invert the soil; it causes the creation of a compacted layer. The samples were taken in the agricultural year 2005/2006 in an Oxisoil at Selviria (MS/Brazil). The tillage management in the last 15 years was no-tillage system with crop rotation (maize -Zea mays L./bean - Phaseolus vulgaris L.). The analyzed soil physical properties were bulk density (BS), gravimetric water content (U) and mechanical resistance to penetration (RP) at three depths: 0-0.10 m, 0.10-0.20 m and 0.20-0.30 m. The samples were taken in a mesh with 117 sampled points covering an area of 0.16 ha. It was investigated the existence of compacted soil layer, using the mechanical resistance to penetration to 0.60 m depth with soil water content at field capacity. The data shows low coefficient of variation, except the resistance penetration data. Bulk density and gravimetric water content has a normal distribution. Only resistance to penetration at 0.10-0.20 m depth layer has a normal distribution. The correlation between different properties was low. The bulk density increases with depth; the increase of the values of soil bulk density are consistent with data in other papers, indicating there are not compaction problems for the crop development at the study area. Most of the values of resistance to penetration are lower than 2 MPa, being this value restrictive for root development. The analysis of resistance to penetration profile 0 to 0.60 m shows a compacted layer between 0.20-0.30 m. This compacted layer was caused by the conventional tillage system used at this area before the use of no-tillage system. The soil bulk density has higher values at the upper area, that it shows higher values of soil compaction. Although the values of bulk density and resistance to penetration are high, the area does not show great problems of soil compaction.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The angular leaf spot of dry bean caused by the fungus Phaeoisairopsis griseola is a very important disease on dry bean crops in Brazil. In propitious weather conditions, susceptible cultivars have significant losses due to this disease. In these conditions, fungicide usage is an important step for angular leaf spot management. Since the effects of this method of control on plant physiology are not known, this study had the following objectives: a) Verify the action of fungicide in physiological changes in dry beans (photosynthesis rate and stomatal conductivity); b) evaluate the efficacy of some fungicides for the control of angular leaf spot; and c) examine the effects of these fungicides on other agronomic parameters; weight of 100 grains, number of grains per pod and number of pods per plant. The dry bean cultivar used in this study was Perola. Four trials were conducted, two in a net greenhouse and two trials under field conditions. A spray of piraclostrobin, tebuconazol and tebuconazol+ trifloxistrobin increased photosynthesis rates, although stomatal conductivity was not changed. In addition, sprays of tebuconazol, piraclostrobin, metiram+piraclostrobin and azoxistrobin provided better levels of disease control and also higher weight of 100 grains, with the exception of azoxystrobin for this parameter.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Common bean is an important crop in Brazil primarily because of its nutritional characteristics. Some agronomic practices, such as weed management, are fundamental to cultivation, as a means of obtaining a high crop yield. However, some studies have shown that weed management may alter the function of the cultivar cycle. Thus, this study aimed at determining the optimal phenological stage in early-maturing common bean cultivars to perform the weed control without providing reductions in yield and seed quality. The experimental design was randomized blocks with 20 treatments and four replications, in a 2×2×5 (cultivars × types of weed control × periods of weed control) factorial scheme. The periods of weed control for both cultivars (Carioca Precoce and IPR-Colibri) consisted of full cycle weeded (control), weed control at the V4-3 stage (first three nodes on the main stem with trifoliate leaves), at the R5 stage (beginning of bloom) and at the R8 stage (appearance of pods) and full cycle unweeded (no weed control). The types of weed control used were chemical (fluazifop-p-butyl + fomesafen) and mechanical (hoe). The Carioca Precoce cultivar demonstrated higher agronomic performance and yield than the IPR-Colibri cultivar, although the IPR-Colibri seeds had a higher vigor. The type of weed control (chemical or mechanical) did not affect the agronomic characteristics, yield and seed physiological potential of the cultivars. The ideal period for weed control in early-maturing common bean cultivars to obtain a higher yield and seed physiological potential was observed at the V4-3 phenological stage.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The competition between weeds and bean plants, especially because of nutrients in the environment, is extremely important to minimize potential losses of crop productivity. Thus, the aim of this work was to evaluate the effects of using nitrogen fertilization on the timing and extent of the period before interference (PAI), total period of interference (PTPI) and the critical period of interference control (PCPI) in bean cultivar 'Ruby'. The seeds were sown in the conventional system and the trial was conducted in two areas at the same time, in which the nitrogen fertilization was performed only in one of them. Each area received 14 treatments consisting of two groups: first, the crop was free of interference of weeds from emergence to 10, 20, 30, 40, 50, 60 and 70 days; and the second: the crop remained free of interference from sowing to the same periods described above. The experimental design was randomized blocks with four replications. Raphanus raphanistrum showed greater relative importance in the two areas, mainly due to the accumulation of dry mass, followed by Amaranthus deflexus. There was no difference in diversity and evenness of weed populations in response to the fertilization. In the area without N PAI occurred 18 days after emergence (DAE), and up to 24 DAE PTPI, resulting in PCPI 18 to 24 DAE, this area had 58% of reduction in crop yield. In the area where with nitrogen fertilization, PAI occurred at 38 DAE and PTPI occurred at 19 DAE. In this area there was 56% of reduction in crop yield. The nitrogen fertilization increased crop productivity and favored competitiveness in relation to weeds.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The isotopic technique was employed to study boron (B) mobility in tomato and beetroot plants under protected cultivation conditions. An experiment was conducted in which both species grew in 10-dm3 vases filled with coconut fiber, under hydroponic conditions. The plants were subjected to four different treatments: (1) no B in the substratum and no foliar fertilization; (2) no B in the substratum, with foliar 10B fertilization; (3) B in the substratum, with foliar 10B fertilization; and (4) 10B in the substratum and no foliar fertilization. The biological growth variables and total B and 10B contents in the plant parts grown after the application of the nutrient were evaluated. For increasing B content in young tissues, the foliar application of this element was not as efficient as application via root system, indicating low mobility of B in the tissues of both beetroot and tomato plants. © 2013 Copyright Taylor & Francis Group, LLC.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Botânica) - IBB

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)