Alternative substrates in the production of lettuce seedlings and their productivity in the field

Based on the hypothesis that alternative substrates should improve the yield of lettuce crops by producing better quality seedlings, the objective of this work was to evaluate the effect of different substrates on the production of seedlings of this species, and their growth in the field. The study was in two stages. The first consisted of the production of lettuce seedlings, and the second assessed their development in the field. Four alternative substrates were tested, obtained by mixing together a sieved vermicompost from which all clumps had been removed, sterilized sand, charred rice husks and basalt powder. The commercial substrate, Plantmax HA®, was also tested. In the first phase, which was conducted in a completely randomised design with four replications, the height, root length, number of leaves, leaf area and dry weight of the seedlings were all evaluated 28 days after sowing. In the second phase, which was carried out in the field in a randomised block design with four replications, the plants were harvested 50 days after transplanting and the head diameter, fresh weight, number of leaves and leaf and stem dry weight were evaluated. The alternative substrates produced larger seedlings in less time than the commercial substrate, resulting in a reduction of 10 days in the total crop cycle. The reduction in the time between sowing and harvesting, together with those aspects relating to sustainability, are the main advantages of the use of alternative substrates, since in the field crop production did not differ between treatments.

Avaliação de fungicidas, óleos essenciais e agentes biológicos no controle de Amphobotrys ricini em mamoneira (Ricinus communis L.)

The castor bean (Ricinus communis L.) is a tropical oilseed species, and the oil extracted from its seeds is one of the most versatile oils in the nature, showing various industrial uses. Even though it is a rustic species, the castor bean is subjected to several diseases such as the gray mold, caused by the fungus Amphobotrys ricini. Genetic breeding would be the best alternative for the disease control, but a long time is required to obtain resistant cultivars. Thus, the use of control strategies based on chemical, alternative or biological methods shows viable in the short term. The aim of this study was to investigate gray mold control efficiency, in castor bean crop, using chemical, alternative and biological methods. The pathogen control efficiency was evaluated both in vitro and in vivo using fungicides, essential oils and biological control agents. As regards the in vitro inhibition of the pathogen mycelial growth, the best treatments with essential oils were those based on C. martini and C. zeylanicum at all five tested concentrations. For both oils, the average diameter of colonies was 0.7 cm against 4.79 cm for the control treatment. For the fungicides, at all four tested levels, the most efficient active ingredients were methyl tiophanate, carbendazim, tebuconazole and iprodione. The ED50 of these fungicides was <1uL/L, yielding 100% mycelial growth inhibition at all concentrations. As to the inhibition of A. ricini conidium germination, the fungicides tebuconazole and chlorotanolyl were the best at all tested concentrations, and the average of germinated conidia with these fungicides was 0.0 and 0.15%, respectively, against 100% for the control treatment. In the field, treatment with the fungicide iprodione was the best for the disease control when compared to biological and alternative treatments. Under field conditions, the average disease severity for the treatment with iprodione was 15.76% against 95.81% for the inoculated control.

Resistência de união ao microcisalhamento de sistemas adesivos autocondicionates com graus de acidez distintos: efeito de diferentes tratamentos em substrato dentinário normal e hipermineralizado artificialmente

Pós-graduação em Ciências Odontológicas - FOAR

Efeitos da vibração simultânea nas propriedades mecânicas de juntas de aço ASTM A131 soldadas pelo processo arame tubular (FCAW)

Pós-graduação em Engenharia Mecânica - FEG

Efeito dos tratamentos de superfície na resistência da união porcelana/cimento resinoso

Pós-graduação em Odontologia Restauradora - ICT

Aditivos na alimentação de frangos de corte: desempenho, características morfométricas e funcionais

Pós-graduação em Zootecnia - FCAV

Caracterização de superfície, adesiva e mecânica de uma zircônia parcialmente estabilizada por ítria em função da partícula ou do momento do jateamento

Pós-graduação em Reabilitação Oral - FOAR

Efeito de tratamentos térmicos nas propriedades mecânicas, eletroquímicas e citotoxidade de ligas do sistema Ti-15Mo-XNb

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistemas suplementares e alternativos de comunicação nas habilidades expressivas de um aluno com paralisia cerebral

The objective of this research was to describe the use of an augmentative and alternative system for a student with cerebral palsy during intervention. A 10-year-old male student with cerebral palsy participated in this investigation. He attended special classes for people with disability in a public school in a city of the interior of Sao Paulo. The scheduled activities were carried out twice a week for two years at the Laboratory of Special Education of a public University of São Paulo. All of the tapes describing the activities that were filmed during the assessment and implementation of augmentative and alternative communication resource were watched and described using a specific protocol. Based on the information from the protocols, the sessions with intervals greater than 20 days and the ones with activities involving the communication board with the time equal or greater than 20 minutes during the first year of intervention were selected. The chosen sessions were transcribed in full and, after analyzing the text, the following categories were established, according to the stated goal: the graphic system helped the student with utterances of vertical structure (56%) associated with the oral (14%) and non-oral and non-verbal form (30%), while the use of the graphic system along with other forms collaborated to enhance statements, enabling better understanding of the child s intention. The use of augmentative and alternative communication systems provided the expansion of effective dialogical situations for the student during the activities carried out in speech therapy.

Desenvolvimento de tratamentos térmicos visando ganhos magnéticos em aços com ultra baixa concentração de carbono

The relationship between the microstructure and the magnetic properties of soft magnetic materials, have been studied by different researchers who seek to employ electrical systems, increasing their life span and reduce their energy consumption. Following this same line the Brazilian Synchrotron Light Laboratory developed a new synchrotron light source, the Sirius, where magnetic materials with high magnetic permeability values are being studied for use in accelerator dipoles. The low carbon steel is a ferromagnetic material that has a great relationship between cost and magnetic permeability. Aiming to raise the values of permeability of the material, heat treatments were done and evaluated the magnetic properties, microstructure and mechanical properties to correlate them. It was noted that the thermal annealing were the most effective, and the annealing performed with a small time threshold, which only phenomenon observed was the primary recrystallisation, was the most elevated values of magnetic permeability of the material, due to the average grain size ideal achieved. The heat treatments do not guide the magnetic domains of the material and not influence the mechanical properties of the material due to lack of carbon in the microstructure. The annealing treatments were shown to be an alternative to raising the values of the magnetic permeability of the material and facilitate the implementation of ultra low carbon steel in the dipoles of Sirius

Tumor venéreo transmissível canino com enfoque nos diversos tratamentos

The canine Transmissible Venereal Tumor (TVT) is a neoplasm of round cells that primarily affects the external genitalia of both male and female dogs with high casuistry. Its transmission occurs by the tumor cells’ implementation in the mucous membranes during the coitus or in other body parts through licking, scratching or direct contact with the tumor. The clinical manifestations vary according to the location. Despite being a malignant neoplasm, TVT’s metastatic potential is low. The diagnosis is based on macroscopic characteristics, clinical signs, cytology and/or histopathology exam, among which cytology is considered the best method. There are several treatment protocols for the TVT, among which, surgical excision, radiotherapy, immunotherapy and chemotherapy. Chemotherapy with vincristine sulfate is the elected treatment. However, more and more new alternatives have been developed, as the usage of natural products, homeopathy and ivermectina. They can be used as a unique treatment to neoplasm or combined to the chemotherapy in order to decrease the dose and the application number of the chemotherapic and its side effects

Técnicas e perspectivas de tratamentos imunoterápicos em câncer

Não disponível

Metodologia de determinação das curvas de probabilidade de falha S-N-P para uma liga de aluminio submetida a diferentes tratamentos termicos de solubilização e precipitação

The approach of the subject matter in this work relies on the fact that the reliability of methods for performance analysis of materials proves critical for the result. This work focused on the development and presentation of the methodology for lifting probability curves for fatigue test (SN) according to standard E739, this focus is justified by the fact that the results in fatigue test show considerable dispersion making it difficult to reading and interpretation of data, this dispersion arises because the phenomenon of rupture is strongly influenced by internal characteristics of the material, we can then have much data ranging from test to test. Thus we set out originally for a brief study of aluminum alloys in question, as well as the treatments to which they were subjected. We also studied the behavior of materials when subjected to cyclic loading, which configures process of fatigue failure, and even fatigue test method in question. This statistical analysis is based on the ASTM E739 standard, so its contents was studied in detail so that we could present in detail the methodology and raise SN curves for different aluminum alloy 7012 subjected to fatigue test. Data were collected from tests conducted in the department of materials from two samples of aluminum alloy 7012 solubilized and precipitated by different time intervals and assayed temperature fatigue-type traction-compression, these data were then analyzed and used to survey curves using the base as E739. After lifting the curve analyzed the characteristics of the test samples and their correlation with the test results. We confirmed the effectiveness of the method of statistical analysis by ASME E739, which allowed the reading of data without this method would be very difficult to have a reading and comparison of the results for the two types... (Complete abstract click electronic access below)

A Leishmaniose Tegumentar Americana no município de Rio Claro - São Paulo (SP): introdução, diagnósticos e tratamentos

Este trabalho teve como objetivo a realização de um levantamento bibliográfico da situação em que a cidade de Rio Claro, interior de São Paulo, se encontra em relação à Leishmaniose Tegumentar Americana, uma vez que, o município foi apontado como foco da doença no ano de 2000 por mídias regionais. O trabalho visa identificar o período de maior número de casos bem como a situação atual da doença na cidade. Este levantamento bibliográfico, contou com auxilio de agentes de saúde da Secretaria Municipal de Saúde e Instituto Adolfo Lutz presente na cidade, além de departamentos da prefeitura municipal envolvidos com tema. Ficou evidente que o município enfrentou períodos de surtos da doença, porém, atualmente a LTA está controlada, apresentando poucos casos em relação há anos anteriores. O atendimento aos doentes é oferecido gratuitamente na rede municipal de saúde. A cidade procura através dos órgãos envolvidos com o tema, conscientizar a população quanto ao risco e método de prevenção

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...