Fracture strength of bovine incisors after intra-radicular treatment with MTA in an experimental immature tooth model

Aim To evaluate, using an experimental immature tooth model, the fracture resistance of bovine incisors submitted to different reinforcement treatments with mineral trioxide aggregate (MTA).Methodology An immature tooth model was created by sectioning the coronal and apical portions of 40 bovine incisors 8 mm above and 12 mm below the cementoenamel junction. The root canals were irrigated with 1.0% sodium hypochlorite. They were enlarged both coronally and apically using number 703 carbide burs (ISO: 500-104-168-007-021) and their internal diameter was standardized to 2.1 mm. The specimens were assigned to four groups (n = 10): GI-control (without filling); GII-apical MTA plug + filling with gutta-percha and endodontic sealer; GIII-filling with MTA; GIV-apical MTA plug + filling with MTA + metallic post (Reforpost I). A polyether impression material was used to simulate the periodontal ligament. The specimens were submitted to a compressive load at a crosshead speed of 0.5 mm min(-1) in a servo-hydraulic universal testing machine (MTS 810) applied at 45 degrees to the long axis of the tooth until failure. Data were submitted to statistical analysis by the Kruskal-Wallis test at 5% significance level.Results GIV presented the highest fracture resistance (32.7N) and differed significantly from the other groups (P < 0.05). No statistically difference was found between GII (16.6N) and GIII (23.4N) (P > 0.05). GIII had a significantly higher fracture resistance than GI (P < 0.05).Conclusions the use of MTA + metallic post as an intra-radicular reinforcement treatment increased the resistance to fracture of weakened bovine teeth in an experimental immature tooth model.

Food deprivation and hypothermia in desynchronized sleep-deprived rats

Reports of the effect of desynchronized sleep (DS) deprivation on body temperature (Tb) of rats in the literature are contradictory. Since conspicuous body weight loss is common in such deprivation, the effect of food plus DS deprivation on Tb of adult male Wistar rats was studied. DS deprivation carried out by the small platform method with food ad libitum(N = 8) induced hyperthermia (Tb above 38.5 degrees C) in 1 to 3 rats daily until the 8th day, when a case of discrete hypothermia (Tb below 36.9 degrees C) appeared. Food deprivation alone started to induce hypothermia on the third day in one (20%) out of five rats. Fasting imposed from the 5th to the 8th day of DS deprivation (N = 12) caused hypothermia in 33% and 67% ofthe animals on the second and third day of starvation, respectively. DS compensatory manifestations in 6 starved rats intensified (N = 2) or precipitated (N = 2) hypothermia after the end of sleep deprivation. It is concluded that the hypothermia is not a primary effect of DS deprivation, and this state of sleep seems to have its particular functional role which is independent of thermoregulation.

Herdabilidades e Correlações Genéticas para Peso e Perímetro Escrotal de Machos e Características Reprodutivas e de Crescimento de Fêmeas, na Raça Canchim

The objective of this study was to estimate heritabilities of and genetic correlations among male body weight (BW12) and scrotal circumference (SC12) at 12 months of age, and female body weights at first (BWFC) and second (BWSC) calvings, age at first (AFC) and second (ASC) calvings, adult weight (AW), and mature weight (A) and maturation rate (k) obtained by the use of the Von Bertalanffy model. The restricted maximum likelihood method with an animal model that included the fixed effects of contemporary group and the random effects of animals, was used to estimate the variance and covariance components. The heritability estimates were equal to: 0.37 (BW12),0.30 (SC12),0.38 (A), 0.35 (k), 0.12 (AFC), 0.33 (BWFC), 0.04 (ASC), 0.39 (BWSC), and 0.38 (AW). The genetic correlations among BW12 and the female traits were: 0.19 (parameter A), 0.62 (parameter k), -0.58 (AFC), 0.69 (BWFC), -0.56 (ASC), 0.61 (BWSC), and 0.60 (AW). The genetic correlations among SC12 and the female traits were: -0.24 (A), 0.27 (k), -0.47 (AFC), 0.09 (BWFC), -0.67 (ASC), 0.07 (BWSC), and -0.17 (AW). These results indicate that male body weight and scrotal circumference and female weights (BWFC, BWSC and AW) and growth curve parameters A and k have enough additive genetic variation to respond to mass selection. Selection to increase male body weight at 12 months of age should result on favorable correlated changes in AFC, ASC and parameter k of females, but with increases in female body weights (BWFC, BWSC and AW). Selection to increase SC12 should result on desirable correlated responses in AFC, ASC and k, without any considerable change in female adult body weights.

Conditions giving rise to intense visible room temperature photoluminescence in SrWO4 thin films: the role of disorder

The nature of intense visible photoluminescence at room temperature of SrWO4 (SWO) non-crystalline thin films is discussed in the light of experimental results and theoretical calculations. The SWO thin films were synthesized by the polymeric precursors method. Their structural properties have been obtained by X-ray diffraction data and the corresponding photoluminescence (PL) spectra have been measured. The UV-vis optical spectra measurements suggest the creation of localized states in the disordered structure. The photoluminescence measurements reveal that the PL changes with the degree of disorder in the SWO thin film. To understand the origin of visible PL at room temperature in disordered SWO, we performed quantum-mechanical calculations on crystalline and disordered SWO periodic models. Their electronic structures are analyzed in terms of DOS, hand dispersion and charge densities. We used DFT method with the hybrid non-local B3LYP approximation. The polarization induced by the symmetry break and the existence of localized levels favors the creation of trapped holes and electrons, giving origin to the room temperature photoluminescence phenomenon in the SWO thin films. (c) 2004 Elsevier B.V. All rights reserved.

Characterizing subpopulations of neoplastic cells in serous effusions - the role of immunocytochemistry

OBJECTIVE: To analyze the role of immunochemistry in serous effusions.STUDY DESIGN: We analyzed cell blocks of 18 pleural and 18 peritoneal effusions diagnosed as malignant (18), benign (14) and suspicious (4). They were immunostained by the avidin-biotin complex method with a panel of four monoclonal antibodies-CEA, Ber-EP4, LeuM1 (CD15) and r53-and for lectins (Ulex europaeus) UEA-1, ConA and ConBr. RESULTS: Seventeen of the 18 cases of adenocarcinoma were positive for CEA (95%), 12 (66.6%)for Bev-EP4, 11 (61 %)for CD15 nild 11 (62 %)for p53. Twelve of the 18 (66.6%) were positive for UEA-1, CEA, Ber-EP4 and CD15. UEA-1 did not react with mesothelial cells. p53 Gave a positive reaction in only one case, reactive mesothelial cells. ConA and ConBr reacted indiscriminately with benign and malignant cells; thus, it was not useful in distinguishing between these cells.CONCLUSION: In this context no antibody used alone is reliable for corroborating a diagnosis, but the selective use of a small panel of three markers (CEA, Ber-EP4 and LeuM1) can be very useful in solving diagnostic difficulties in the cytodiagnosis of serous effusions.

Influence of the LiNbO3 and KNbO3 seeds on the sintering and electrical properties of PMN ceramic

The effect of LiNbO3 and KNbO3 seeds on the microstructure and dielectric characteristics of PMN ceramic prepared by columbite route have been investigated with the addition of 0, 1, and 2-wt% of seeds. X-ray diffraction, Scanning Electron Microscopy and an impedance analyzer were used to characterize the influence of seeds on physical characteristics and dielectric properties of PMN. LiNbO3 -seeded PMN samples present a significant increase in the amount of perovskite phase. The addition of LiNbO3 seeds in sintered PMN ceramics at 1100degreesC during 4 h causes a decrease in the porosity and the amount of pyrochlore phase. Weight losses during sintering of PMN ceramics are suppressed more significantly for LiNbO3 -seeded PMN. T-m of PMN ceramics changes with seeds concentration. KNbO3 seeds displace T-m to lower temperature whereas LiNbO3 causes its elevation. Dielectric constants of approximately 13,000 at 1 kHz was measured at -5degreesC in PMN ceramics with 1-wt% of LiNbO3 seeds.

Improvement of the ferroelectric properties of ABO(3) (A= Pb, Ca, Ba; B=Ti, Zr) films

High-quality ABO(3)/LaNiO3 (A = Ph, Ca, Ba; B = Ti, Zr) hetero structures have been grown on LaAlO3 (1 0 0) substrate by the chemical solution deposition method and crystallized by a microwave oven technique. The structural, morphological and electric properties were characterized by means of X-ray diffraction (XRD), atomic force microscope (AFM), and dielectric and ferroelectric measurements. XRD patterns revealed single-phase polycrystalline and oriented thin films whose feature depends on the composition of the films. The AFM surface morphologies showed a smooth and crack-free surface with the average grain size ranging from 116 to 300 nm for both LaNiO3 electrode and the ferroelectric films. Dielectric measurements on these samples revealed dielectric constants as high as 1800 at frequency of 100 KHz. Such results showed that the combination of the chemical solution method with the microwave process provides a promising technique to grow high-quality thin films with good dielectric and ferroelectric properties. (c) 2005 Elsevier Ltd. All rights reserved.

Photoluminescence in amorphous TiO2-PbO systems

Photoluminescence (PL) at room temperature has been achieved in amorphous thin films and powders of the TiO2-PbO system. They were prepared by the polymeric precursor method with [PbO]/[TiO2] molar ratios ranging from 0.0 to 1.0. The energy position of maximum PL emission and the PL intensity showed dependence on Pb concentration. The Pb addition suggests an increase in the number of nonbridging oxygens (NBO) in the amorphous TiO2 network. These results support the relationship between photoluminescence and structure in TiO2-based amorphous materials.

Pharmacokinetics of a new long acting endectocide formulation containing 2.25% ivermectin and 1.25% abamectin in cattle

The objective of this study was to determine the kinetic parameters of a new formulation that contained 2.25% ivermectin combined with 1.25% abamectin in bovine plasma. The results for 2.25% ivermectin: C-max (37.11 ng/mL +/- 7.42), T-max (16 days +/- 5.29), T-1/2 (44.62 days +/- 53.89), AUC (928.2 ng.day/mL +/- 153.83) and MRT (36.73 days +/- 33.64), and for 1.25% abamectin: C-max (28.70 ng/mL +/- 9.54), T-max (14 days +/- 4.04), T-1/2 (15.40 days +/- 11.43), AUC (618.05 ng.day/mL +/- 80.27) and MRT (20.79 days +/- 8.43) suggest that this combination of 2.25% ivermectin + 1.25% abamectin possesses properties that give this pharmaceutical formula a longer activity time than two of the commercial products tested (1% ivermectin and 1% abamectin), and showed similarity to 3.15% ivermectin.

REDUCTION OF URINE VOLUME AMELIORATES ADRIAMYCIN-INDUCED NEPHROPATHY

1. Adriamycin, a commonly used antineoplastic antibiotic, induces glomerular lesions in rats, resulting in persistent proteinuria and glomerulosclerosis.2. The effect of urine volume on the progression of adriamycin-induced nephropathy was studied in 70 male Wistar rats (180-200 g) observed for 30 weeks and separated into 4 groups: healthy control group (HCG, N = 10) inoculated iv with 1 ml of saline, and nephrotic groups inoculated iv with a single dose of adriamycin of 3 mg/kg body weight. The nephrotic rats were separated into 3 groups (N = 20): nephrotic control group (NCG) receiving only adriamycin; dehydrated nephrotic group (DNG) water deprived for 36 h within each 48-h period, and furosemide nephrotic group (FNG) treated with 12 mg/dl furosemide, and 0.9 g/dl NaCl in the drinking water.3. The 30-week survival rates of the DNG (100%) and HCG (100%) were significantly higher than those of the NCG (85%) and FNG (55%).4. The proteinuria observed in the HCG (range, 7.38 +/- 0.7 to 13.6 +/- 1.27 mg/24 h) was significantly lower than that observed for all the nephrotic groups throughout the experiment. The DNG presented significantly less proteinuria (range, 42.71 +/- 6.83 to 140.10 +/- 19.22 mg/24 h) than the NCG (range, 35.32 +/- 7.64 to 250.00 +/- 25.91 mg/24 h) from week 10 on. There was no significant difference between the mean 24-h proteinuria of the NCG (range, 35.32 +/- 7.64 to 250.00 +/- 25.91 mg/24 h) and the FNG (range, 35.82 +/- 7.91 to 221.54 +/- 26.74).5. The mean frequency of damaged glomeruli was 0.3% +/- 0.3 for HCG, 42% +/- 6% for CNG, 40.8% +/- 8% for DNG, and 47% +/- 14% for FNG. The median value of the tubulointerstitial lesion, evaluated by a semiquantitative method, was 0 in HCG, 10 in CNG, 8.5 in DNG and 9.5 in FNG(P<0.05 for all groups compared to HCG).6. The data indicate that reduction of urine volume has a protective effect on adriamycin-induced nephropathy.

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

Objectives. This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application.Methods. Thirty-two blocks (6.4 mm x 6.4 mm x 4.8 mm) were fabricated using a microparticulate feldspathic ceramic (Vita VM7), ultrasonically cleaned with water for 5 min and randomly divided into four groups, according to the type of etching agent and silanization method: method 1, etching with 10% hydrofluoric (HF) acid gel for I min + silanization; method 2, HF only; method 3, etching with 1.23% acidulated phosphate fluoride (APF) for 5 min + silanization; method 4, APF only. Conditioned blocks were positioned in their individual silicone molds and resin cement (Panavia F) was applied on the treated surfaces. Specimens were stored in distilled water (37 degrees C) for 24 h prior to sectioning. After sectioning the ceramic-cement blocks in x- and Y-axis with a bonded area of approximately 0.6 mm(2), the microsticks of each block were randomly divided into two storage conditions: Dry, immediate testing; TC, thermal cycling (12,000 times) + water storage for 150 d, yielding to eight experimental groups. Microtensile bond strength tests were performed in universal testing machine (cross-head speed: 1 mm/min) and failure types were noted. Data obtained (MPa) were analyzed with three-way ANOVA and Tukey's test (alpha = 0.05).Results. Significant influence of the use of silane (p < 0.0001), storage conditions (p = 0.0013) and surface treatment were observed (p = 0.0014). The highest bond strengths were achieved in both dry and thermocycled conditions when the ceramics were etched with HF acid gel and silanized (17.4 +/- 5.8 and 17.4 +/- 4.8 MPa, respectively). Silanization after HF acid gel and APT treatment increased the results dramatically (14.5 +/- 4.2-17.4 +/- 4.8 MPa) compared to non-silanized groups (2.6 +/- 0.8-8.9 +/- 3.1 MPa) where the failure type was exclusively (100%) adhesive between the cement and the ceramic.Significance. Silanization of the feldspathic ceramic surface after APF or HF acid etching increased the microtensile bond strength results significantly, with the latter providing higher results. Long-term thermocycling and water storage did not decrease the results in silanized groups. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

RELATIVE GROWTH OF THE SPECKLED SWIMMING CRAB ARENAEUS-CRIBRARIUS (LAMARCK, 1818) (BRACHYURA, PORTUNIDAE), NEAR UBATUBA, STATE OF SAO-PAULO, BRAZIL

Arenaeus cribrarius is a mainly tropical crab that occurs in the Western Atlantic Ocean, Brazil being its type-locality. The species ranges from Vinevard Sound, Massachusetts, USA to La Paloma, Uruguay. Information about this species is scarce. The relative growth of A. cribrarius was analyzed, based on some morphometric relations, where the carapace width, excluding lateral spines (CW), was used as an independent variable. A total of 403 specimens (189 males and 214 females), was collected in Ubatuba, State of São Paulo, Brazil, with otter-trawls. The animals were sexed and sorted to maturation phase (juvenile or adult). Some measurements were made: carapace (length and width excluding lateral spines), abdomen (greatest width of the fifth somite in females and the sixth in males) and major chela (greatest length, width and height, dactylus length). This study was made by the application of the power function (y=a.x(b)) which was fitted to the data and the pattern of growth established for each parameter by the ''b''-value (constant of allometry), as positive allometry (b>1), negative allometry (b<1) or isometry (b=1). The morphometric relations of the carapace showed a tendency to isometry. In females, the abdominal width grew in positive allometry, higher in juveniles (b=1.33) than in adults (b=1.18). In this case, an overlap and discontinuity was noticed between the phases over a carapace width range of 55 to 70 mm, where the puberty molt occurs. The majority of relationships showed that the major chela of the males grew in positive allometry, however, the greatest allometric difference between the phases was observed towards the propodus length with 1.09 as juvenile and 1.26 as adult ''b''values. In the males, this variable showed an inflection between the CW range of 45' to 55 mm, where the transition to the maturation phase occurs. The relative growth of this species is similar to those of previously studied species. This indicates, that the propodus length and the abdominal width are the morphometric variables most appropriate to estimate the size of the beginning of the sexual maturity for males and females of this species, respectively.

Avaliação da vinhaça líquida em substituição à água na terminação de bovinos em confinamento. 1. Desempenho

During 90 days 243 finishing feedlot animals from two genetic groups, were weighed every 28 days in a randomized experimental procedure in a 2 x 3 factorial arrangement, with two breeds - Nelore (Nel) and Canchim (Can) - and three treatments: water (A), cane stillage + magnesium oxide (V) and cane stillage + magnesium oxide + sodium bicarbonate (V + B). The diet for all treatments was composed of 70% of corn silage and 30% of chopped sugar cane ad libitum plus 1 kg of ground corn and 1,5 kg of soluble yeast per animal. Results showed higher weight gain (P < 0,01) of the Can group relation to those of Nel, having respectively 1,35 and 1,22 kg/head/day. Both Can and Nel groups showed higher weight gain (P <.01) when fed with V + B, with 1,44 and 1,32 kg/head/day respectively when comparing to the other diets: Can (A) = 1,30; Can (V) = 1,31; Nel (A) = 1,16 and Nel (V) = 1,20 kg/head/day. The diet using V + B has also showed a tendency (.05

10) of better food conversion thus showing positive effect of cane stillage when associated to the neutralizing compounds of the ruminal pH.

Very large dielectric constant of highly oriented Pb1-xBaxTiO3 thin films prepared by chemical deposition

Highly (100) oriented Pb0.8Ba0.2TiO3/LaNiO3 structures were grown on LaAlO3(100) substrates by using a wet, soft chemical method and crystallized by the microwave oven technique. The Au/PBT/LaNiO3/LaAlO3 capacitor shows a hysteresis loop with remnant polarization, P-r, of 15 muC/cm(2), and coercive field, E-c, of 47 kV/cm at an applied voltage of 3 V, along with a dielectric constant over 1800. Atomic force microscopy showed that Pb0.8Ba0.2TiO3 is composed of large grains about 300 nm. The experimental results demonstrated that the microwave preparation is rapid, clean, and energy efficient. Therefore, we demonstrated that the combination of the soft chemical method with the microwave process is a promising technique to grow highly oriented thin films with excellent dielectric and ferroelectric properties, which can be used in various integrated device applications. (C) 2004 American Institute of Physics.

Evaluation of intraocular pressure in association with cardiovascular parameters in normocapnic dogs anesthetized with sevoflurane and desflurane

The objective of this study was to determine intraocular pressure (IOP) and cardiac changes in normocapnic dogs maintained under controlled ventilation and anesthetized using sevoflurane or desflurane. Sixteen healthy adult mixed-breed dogs, seven males and nine females, weighing 10-15 kg were used. The dogs were randomly assigned to one of two groups composed of eight animals anesthetized with sevoflurane (SEVO) or desflurane (DESF). In both groups, anesthesia was induced with propofol (10 mg/kg), and neuromuscular blockade was achieved with rocuronium (0.6 mg/kg/h IV). No premedication was given. Ventilation was adjusted to maintain end-tidal carbon dioxide partial pressure at 35 mmHg. Anesthesia was maintained with 1.5 minimum alveolar concentration (MAC) of sevoflurane or desflurane. In both groups IOP was measured by applanation tonometry (Tono-Pen) before induction of anesthesia. IOP, mean arterial pressure (MAP), heart rate (HR), cardiac index (CI) and central venous pressure (CVP) were also measured 45 min after the beginning of inhalant anesthesia and then every 20 min for 60 min. A one-way repeated measures ANOVA was used to compare data within the same group and Student's t-test was used to assess differences between groups. P < 0.05 was considered statistically significant. Measurements showed normal IOP values in both groups, even though IOP increased significantly from baseline during the use of desflurane. IOP did not differ between groups. CI in the desflurane group was significantly greater than in the sevoflurane group. Sevoflurane and desflurane have no clinically significant effects on IOP, MAP, HR, CI or VCP in the dog.