Efeito da presença das plantas daninhas no microclima da cultura da cevada

Um experimento foi realizado com cevada (Hordeum vulgare L.) em condições de campo, com o objetivo de avaliar , durante um período de estiagem (82 e 89 dia após a emergência da cevada), o microclima formado pela cultura mantida na presença ou ausência de plantas daninhas desde o início do ciclo. Foram avaliados o teor de água do solo, umidade relativa, temperatura, tensão de vapor d'água, déficit de saturação de vapor d'água, potencial água e teor de água do ar nos períodos da s 8: 30 às 9:00, 11:30 às 12:00, 14:30 às 15:00 e 17:30 às 18:00 horas a 0,0m, 0,10m, 0,20m, 0,30m, 0,40m, 0,50m, 0,60m e 0,70m de altura na entrelinha da cultura. A presença das plantas daninhas na cultura durante o período de estiagem contribuiu para reduzir as perdas de água do solo para a atmosfera. Nos três primeiros períodos do dia e nas áreas mais próximas do solo, a cultura mantida no mato os menores valores de temperatura e déficit de saturação de vapor d'água do ar, e os maiores valores de umidade relativa, tensão de vapor d'água, potencial água e teor de água do ar, que proporcionaram redução do consumo de água do solo.

Anatomia foliar de bromélias ocorrentes em áreas de cerrado do Estado de São Paulo, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do teor de água do substrato no enraizamento de estacas de eválvulo branco (Evolvulus pusilus)

Objetivando verificar a influência do teor de água do substrato no enraizamento de estacas de eválvulo branco (Evolvulus pusilus), conduziu-se um ensaio sob condições de laboratório. Os efeitos de cinco níveis de água no substrato (solo x areia 3:1 de 20, 40, 60, 80 e 100% da capacidade de retenção) no enraizamento, foram avaliados através da porcentagem de estacas enraizadas. Para cada repetição, 20 estacas apicais, com comprimento médio de 15 cm, foram introduzidas a uma profundidade de 6 cm, perfazendo 80 estacas por tratamento. Os resultados permitiram concluir que o teor de água do substrato entre 50% e 70% da capacidade de retenção, possibilitou enraizamento superior para estacas de eválvulo branco.

Efeitos de potenciais de água no solo, em diferentes estádios fenológicos da cultura da cevada (Hordeum vulgare L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistência à seca em quatro cultivares de trigo: parâmetros fisiológicos

A resistência à seca foi estudada em quatro cultivares de trigo, dois de porte baixo: Anahuac e IAC-24 e dois de porte alto, BH-1146 e IAC-23, em dois tratamentos de irrigação: I- vasos constantemente molhados por capilaridade; II- vasos irrigados quando o potencial de água do solo atingisse, aproximadamente, -1,5 MPa. O potencial de água e o teor relativo de água das folhas foram mais elevados no tratamento precondicionado ao estresse, em relação ao irrigado por capilaridade, em todos os cultivares sob as mesmas condições de umidade do solo em ambos os estádios considerados: desenvolvimento vegetativo e reprodutivo. Embora os estômatos das plantas do tratamento submetido ao estresse permanecessem abertos a potenciais de água mais negativos que naqueles em que as plantas recebiam água constantemente, não foi possível separar genótipos mais ou menos resistentes à seca, utilizando-se a difusividade ao vapor d'água dos estômatos acoplada ao teor relativo de água e ao potencial de água das folhas.

WHEAT CULTIVARS: RESPONSE TO IRRIGATION and SOWING DATES

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of cooling procedure on final denture base adaptation

Well-fitted dentures prevent hyperplasic lesions, provide chewing efficiency and promote patient's comfort. Several factors may affect final adaptation of dentures, as the type of the acrylic resin, the flask cooling procedure and the water uptake. This investigation evaluated the effect of water storage and two different cooling procedures [bench cooling (BC) for 2 h; running water (RW) at 20 degreesC for 45 min] on the final adaptation of denture bases. A heat-cured acrylic resin (CL, Classico, Classico Artigos Odontologicos) and two microwave-cured acrylic resins [Acron MC, (AC) GC Dent. Ind. Corp.; Onda Cryl (OC), Classico Artigos Odontologicos] were used to make the bases. Adaptation was assessed by measuring the weight of an intervening layer of silicone impression material between the base and the master die. Data was submitted to ANOVA and Tukey's test (0.05). The following means were found: (BC) CL=0.72 +/- 0.03 a; AC=0.70 +/- 0.03 b; OC=0.76 +/- 0.04 c//(RW) CL= 1.00 +/- 0.11 a; AC=1.00 +/- 0.12 a; OC=0.95 +/- 0.10 a. Different labels join groups that are not statistically different (P > 0.05). Comparisons are made among groups submitted to the same cooling procedure (BC or RW). The conclusions are: interaction of type of material and cooling procedure had a statistically significant effect on the final adaptation of the denture bases (P < 0.05); water storage was not detected as a source of variance (P > 0.05) on the final adaptation.

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

Objectives. This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application.Methods. Thirty-two blocks (6.4 mm x 6.4 mm x 4.8 mm) were fabricated using a microparticulate feldspathic ceramic (Vita VM7), ultrasonically cleaned with water for 5 min and randomly divided into four groups, according to the type of etching agent and silanization method: method 1, etching with 10% hydrofluoric (HF) acid gel for I min + silanization; method 2, HF only; method 3, etching with 1.23% acidulated phosphate fluoride (APF) for 5 min + silanization; method 4, APF only. Conditioned blocks were positioned in their individual silicone molds and resin cement (Panavia F) was applied on the treated surfaces. Specimens were stored in distilled water (37 degrees C) for 24 h prior to sectioning. After sectioning the ceramic-cement blocks in x- and Y-axis with a bonded area of approximately 0.6 mm(2), the microsticks of each block were randomly divided into two storage conditions: Dry, immediate testing; TC, thermal cycling (12,000 times) + water storage for 150 d, yielding to eight experimental groups. Microtensile bond strength tests were performed in universal testing machine (cross-head speed: 1 mm/min) and failure types were noted. Data obtained (MPa) were analyzed with three-way ANOVA and Tukey's test (alpha = 0.05).Results. Significant influence of the use of silane (p < 0.0001), storage conditions (p = 0.0013) and surface treatment were observed (p = 0.0014). The highest bond strengths were achieved in both dry and thermocycled conditions when the ceramics were etched with HF acid gel and silanized (17.4 +/- 5.8 and 17.4 +/- 4.8 MPa, respectively). Silanization after HF acid gel and APT treatment increased the results dramatically (14.5 +/- 4.2-17.4 +/- 4.8 MPa) compared to non-silanized groups (2.6 +/- 0.8-8.9 +/- 3.1 MPa) where the failure type was exclusively (100%) adhesive between the cement and the ceramic.Significance. Silanization of the feldspathic ceramic surface after APF or HF acid etching increased the microtensile bond strength results significantly, with the latter providing higher results. Long-term thermocycling and water storage did not decrease the results in silanized groups. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Composite Resin to Yttria Stabilized Tetragonal Zirconia Polycrystal Bonding: Comparison of Repair Methods

Purpose: The purpose of the current study was to evaluate different approaches for bonding composite to the surface of yttria stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics.Methods: One hundred Y-TZP blocks were embedded in acrylic resin, had the free surface polished, and were randomly divided into 10 groups (n=10). The tested repair approaches included four surface treatments: tribochemical silica coating (TBS), methacryloxydecyldihidrogenphosphate (MDP)-containing primer/silane, sandblasting, and metal/zirconia primer. Alcohol cleaning was used as a "no treatment" control. Surface treatment was followed by the application (or lack thereof) of an MDP-containing resin cement liner. Subsequently, a composite resin was applied to the ceramic surface using a cylindrical mold (4-mm diameter). After aging for 60 days in water storage, including 6000 thermal cycles, the specimens were submitted to a shear test. Analysis of variance and the Tukey test were used for statistical analyses (alpha=0.05).Results: Surface treatment was a statistically significant factor (F=85.42; p<0.0001). The application of the MDP-containing liner had no effect on bond strength (p=0.1017). TBS was the only treatment that had a significantly positive effect on bond strength after aging.Conclusion: Considering the evaluated approaches, TBS seems to be the best surface treatment for Y-TZP composite repairs. The use of an MDP-containing liner between the composite and Y-TZP surfaces is not effective.

Adhesive Quality of Self-adhesive and Conventional Adhesive Resin Cement to Y-TZP Ceramic Before and After Aging Conditions

Purpose: This study evaluated the adhesive quality of simplified self-adhesive and conventional resin cements to Y-TZP in dry and aged conditions. Methods: Y-TZP ceramic blocks (N=192) (5 x 5 x 2 mm) were embedded in acrylic resin and randomly divided into two groups, based on surface conditioning: 96% isopropanol or chairside tribochemical silica coating and silanization. Conditioned ceramics were divided into four groups to receive the resin cements (Panavia F 2.0, Variolink II, RelyX U100 and Maxcem). After 24 hours, half of the specimens (n=12) from each group were submitted to shear bond strength testing (0.5 nun/minute). The remaining specimens were tested after 90 days of water storage at 37 degrees C and thermocycling (12,000x, 5 degrees C-55 degrees C). Failure types were then assessed. The data were analyzed using three-way ANOVA and the Tukey's test (alpha=0.05). Results: Significant effects of ceramic conditioning, cement type and storage conditions were observed (p<0.0001). The groups cleaned using alcohol only showed low bond strength values in dry conditions and the bond strength was reduced dramatically after aging. Groups conditioned using silica coating and silanization showed higher bond strengths both in dry and aged conditions. A high number of specimens failed prematurely prior to testing when they were cleaned using 96% isopropanol. Conclusion: Overall, silica coating and silanization showed higher, stable bond strengths with and without aging. The durability of resin-ceramic adhesion varied, depending on the adhesive cement type.

The primary sources of carbon loss during the crop-establishment period in a subtropical Oxisol under contrasting tillage systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Flooding tolerance of Tabebuia cassinoides: Metabolic, morphological and growth responses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

As variaveis relevo e 'solo' na distribuicao desigual da umidade do solo. Avaliacao preliminar.

In a general way the analysis of soil water content enabled one to define which of the colluvium units hold larger water retention capacity. They are: Bela Vista, Piracema I, Campo Alegre, Bom Retiro and Treviso II. These results suggest that the contact zones among alostratigraphic units with high and low water retention capacity are potential zones for the generation of subsurface flow (throughflow). -from English summary

Alterações de fluidos corpóreos na rã Leptodactylus fuscus durante a estivação (Anura, Leptodactylidae).

The frog, L. fuscus, becomes dormant during the dry season in southeastern Brazil. Plasma and urine were obtained and analyzed for K+, Na+, and osmotic concentrations in active and estivating frogs. Soil water potential from the estivation sites was compared with the osmotic concentrations of the frog. Plasma and urine osmotic concentrations (286.2 +/- 13.8 and 242.3 +/- 17.2 mOsm1(-1), respectively) were higher in the estivating than in active frogs (240.3 +/- 12.8 and 112.7 +/- 15.6 mOsm1(-1); plasma and urine), and the same holds true for plasma K+ content. The Na+ concentration was the same for active and estivating frogs. Soil water potential corresponded to osmotic pressure of 110 mOsm1(-1), showing that L. fuscus may uptake water from the soil during the estivation.

Resistência ao Cisalhamento de um Latossolo sob Diferentes uso e Manejo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)