Plantio direto de soja e milho no sistema integração agricultura-pecuária: condicionamento do solo e rotação de culturas

Pós-graduação em Agronomia - FEIS

Implantação da cultura de cana-de-açúcar em argissolo vermelho do noroeste paulista: preparo do solo e uso de gesso

Pós-graduação em Agronomia - FEIS

Influence of field slope and coffee plantation age on the physical properties of a red-yellow Latosol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sugarcane trash management assessed by the interaction of yield with soil properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inter-relações da produtividade de cana soca com a resistência à penetração, umidade e matéria orgânica do solo

The sugarcane crop plays an important role on Brazilian economy,, especially in the aspect related to alternative energy sources. Yield of ratoon cane (2nd cycle) was evaluated in relation to resistance to penetration, gravimetric moisture and organic matter in a Typic Tropustalf, in the municipality of Suzanápolis (SP), 20º28'10'' S and 50º49'20'' W, in the Brazilian cerrado, in 2009. The main purpose was to select, among the attributes surveyed, the one with the highest linear and spatial correlations that explains the variability of sugar cane yield. A geostatistical grid was installed in order to collect data from the soil as well from the plant, with 120 sampling points in an area of 14.53 ha. Organic matter correlated linearly and negatively with penetration resistance, indicating that the soil management practices that aim its increase in the soil profile can improve soil physical conditions, and consequently, the development and yield of sugarcane. Both gravimetric moisture (UG) and content of soil organic matter (OM) correlated directly, linearly (UG2 and MO1) and spatially (UG1 and MO1) with sugarcane yield, proving to be the best attributes, among the evaluated ones, to estimate and increase the sugarcane yield.

Chemical and biological properties of phosphorus-fertilized soil under legume and grass cover (Cerrado region, Brazil)

The use of cover crops has been suggested as an effective method to maintain and/or increase the organic matter content, while maintaining and/or enhancing the soil physical, chemical and biological properties. The fertility of Cerrado soils is low and, consequently, phosphorus levels as well. Phosphorus is required at every metabolic stage of the plant, as it plays a role in the processes of protein and energy synthesis and influences the photosynthetic process. This study evaluated the influence of cover crops and phosphorus rates on soil chemical and biological properties after two consecutive years of common bean. The study analyzed an Oxisol in Selvíria (Mato Grosso do Sul, Brazil), in a randomized block, split plot design, in a total of 24 treatments with three replications. The plot treatments consisted of cover crops (millet, pigeon pea, crotalaria, velvet bean, millet + pigeon pea, millet + crotalaria, and millet + velvet bean) and one plot was left fallow. The subplots were represented by phosphorus rates applied as monoammonium phosphate (0, 60 and 90 kg ha-1 P2O5). In August 2011, the soil chemical properties were evaluated (pH, organic matter, phosphorus, potential acidity, cation exchange capacity, and base saturation) as well as biological variables (carbon of released CO2, microbial carbon, metabolic quotient and microbial quotient). After two years of cover crops in rotation with common bean, the cover crop biomass had not altered the soil chemical properties and barely influenced the microbial activity. The biomass production of millet and crotalaria (monoculture or intercropped) was highest. The biological variables were sensitive and responded to increasing phosphorus rates with increases in microbial carbon and reduction of the metabolic quotient.

Physical quality of an Oxisol under an integrated crop-livestock-forest system in the Brazilian Cerrado

Soil physical quality is an important factor for the sustainability of agricultural systems. Thus, the aim of this study was to evaluate soil physical properties and soil organic carbon in a Typic Acrudox under an integrated crop-livestock-forest system. The experiment was carried out in Mato Grosso do Sul, Brazil. Treatments consisted of seven systems: integrated crop-livestock-forest, with 357 trees ha-1 and pasture height of 30 cm (CLF357-30); integrated crop-livestock-forest with 357 trees ha-1 and pasture height of 45 cm (CLF357-45); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 30 cm (CLF227-30); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 45 cm (CLF227-45); integrated crop-livestock with pasture height of 30 cm (CL30); integrated crop-livestock with pasture height of 45 cm (CL45) and native vegetation (NV). Soil properties were evaluated for the depths of 0-10 and 10-20 cm. All grazing treatments increased bulk density (r b) and penetration resistance (PR), and decreased total porosity (¦t) and macroporosity (¦ma), compared to NV. The values of r b (1.18-1.47 Mg m-3), ¦ma (0.14-0.17 m³ m-3) and PR (0.62-0.81 MPa) at the 0-10 cm depth were not restrictive to plant growth. The change in land use from NV to CL or CLF decreased soil organic carbon (SOC) and the soil organic carbon pool (SOCpool). All grazing treatments had a similar SOCpool at the 0-10 cm depth and were lower than that for NV (17.58 Mg ha-1).

Arbuscular mycorrhizal fungal communities and soil aggregation as affected by cultivation of various crops during the sugarcane fallow period

Management systems involving crop rotation, ground cover species and reduced soil tillage can improve the soil physical and biological properties and reduce degradation. The primary purpose of this study was to assess the effect of various crops grown during the sugarcane fallow period on the production of glomalin and arbuscular mycorrhizal fungi in two Latosols, as well as their influence on soil aggregation. The experiment was conducted on an eutroferric Red Latosol with high-clay texture (680 g clay kg-1) and an acric Red Latosol with clayey texture (440 g kg-1 clay) in Jaboticabal (São Paulo State, Brazil). A randomized block design involving five blocks and four crops [soybean (S), soybean/fallow/soybean (SFS), soybean/millet/soybean (SMS) and soybean/sunn hemp/soybean (SHS)] was used to this end. Soil samples for analysis were collected in June 2011. No significant differences in total glomalin production were detected between the soils after the different crops. However, total external mycelium length was greater in the soils under SMS and SHS. Also, there were differences in easily extractable glomalin, total glomalin and aggregate stability, which were all greater in the eutroferric Red Latosol than in the acric Red Latosol. None of the cover crops planted in the fallow period of sugarcane improved aggregate stability in either Latosol.

Propriedades físicas de um Nitossolo Vermelho em função dos sistemas de uso e manejo

O solo, um dos principais suportes da produção agrícola tem seu comportamento regido por um complexo conjunto de fatores físicos, químicos e biológicos, razão pela qual o presente trabalho teve como objetivo avaliar as modificações dos atributos físicos de um Nitossolo Vermelho distroférrico com diferentes manejos, na Faculdade de Ciências Agronômicas - UNESP, Campus de Botucatu, São Paulo, Brasil. O delineamento estatístico foi inteiramente casualizado, com seis repetições em três diferentes áreas, sendo uma área de mata nativa, uma área com sistema de preparo convencional do solo e uma área com plantio direto. Foram determinados: matéria orgânica, argila natural, porosidade total, macroporosidade, densidade do solo, resistência à penetração e diâmetro médio ponderado dos agregados. O sistema de preparo convencional apresentou os menores teores de matéria orgânica na camada até 0,20 m. Na resistência à penetração não houve diferença entre os tratamentos. Para as cinco profundidades do sistema de preparo convencional observaram-se maior densidade e teor de argila natural em comparação aos outros sistemas. O sistema de preparo convencional diferiu dos demais tratamentos quanto ao diâmetro médio ponderado, porosidade total e macroporosidade apresentando os menores valores desses atributos.

Modalities for soil preparation and gypsum application in ultisol: stem productivity of sugarcane

O trabalho foi conduzido em área de expansão de cana-de-açúcar da Usina Vale do Paraná, no município de Suzanápolis - SP, na região do noroeste paulista. Foi utilizada a variedade de cana RB92-5345, espaçamento de 1,5 m entre linhas, em ARGISSOLO VERMELHO. O trabalho objetivou avaliar a produtividade em cana-planta e 1ª cana-soca e alguns atributos químicos de solo, em função dos métodos de preparo do solo e aplicação ou não de gesso. O delineamento experimental utilizado foi o de blocos ao acaso, com seis tratamentos, fatorial 3x2, e seis repetições. Os tratamentos principais foram preparos de solo com três equipamentos: arado de aivecas, escarificador e grade pesada, e dois tratamentos secundários com aplicação de 1 t ha-1 de gesso e sem gesso. Após cada colheita da cana, o solo foi caracterizado quanto aos indicadores de fertilidade nas camadas de 0,0-0,15; 0,15-0,30 e 0,30-0,45 m. As diferenças dos atributos químicos do solo, devido aos métodos de preparo ocorridas na cana-planta, não perduraram até a colheita da 1ª cana-soca e também não influenciaram na produtividade da cultura. A gessagem proporcionou maiores valores de ATR e produtividade de TCH, para cana-planta e 1ª cana-soca, respectivamente, confirmando a hipótese inicial.

Atributos da solução e do solo de cerrado após aplicação de resíduo da extração de celulose

Pós-graduação em Agronomia - FEIS

Variabilidade espacial de atributos físicos de solos antropogênico e não antropogênico na região de Manicoré, AM

Better knowledge of the anthropogenic soils can help create future scenarios for the Amazon region through information that supports the sustainable planning. The aim of this study was to evaluate the spatial variability of soil physical anthropogenic and not anthropogenic in the region of Manipur, AM. In the study area we selected two, one with no anthropogenic soils (native forest) and another with anthropogenic soils (black earth archaeological). In each area, we established a grid measuring 70 x 70 m and the soils were sampled at the points of intersection of the grid with regular spacing of 10 by 10 feet, making a total of 64 sampling points in each landscape. Soil samples were collected at a depth from 0.0 to 0.10 I did the analyzes physical (texture, bulk density, macroporosity, microporososidade, porosity and aggregate stability). Then, the data were subjected to descriptive statistics and geostatistics. It was found that the anthropogenic and non-anthropogenic soils showed different behaviors in relation ace their spatial structures. The spatial variability that prevailed in anthropogenic and non-anthropogenic soil was moderate and weak indicating that these soils are strongly linked to changes in the soil by extrinsic factors. The soil was observed anthropogenic best results for total porosity, microporosity and bulk density, showing superior characteristics compared for agronomic soil not anthropogenic. And the range of values found in the above two areas were used in the mesh, showing greater spatial continuity in these environments.

Clay mineralogy and magnetic susceptibility of Oxisols in geomorphic surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Caracterização de solos sob diferentes usos na região sul do Amazonas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)