Avaliação quantitativa do uso dos recursos hídricos em unidade de conservação e entorno: estudo de caso do Parque Estadual da Serra do Mar

Pós-graduação em Engenharia Civil e Ambiental - FEB

Avaliação da influência dos parâmetros de processo de soldagem MIG no surgimento de poros em tubos de alumínio

The process of electric arc welding with shielding gas (GMAW) is being increasingly used in various industrial applications. This process occurs by which an electric arc is established between the work piece and a consumable in the form of wire, the arc melts the wire continuously as it is fed to the weld pool. The weld metal is protected from the atmosphere by flowing a gas (or gas mixture) inert or active. This paper presents a study of the welding process GMAW - MIG on aluminum tubes, alloy 6101 - T6, used in the manufacture of armored busbar, intended for driving electric power plants. 5(five) were welded specimens, changing certain welding parameters at each time was monitored welding joint as well as the interpass temperature. Tests were performed bending, tensile and macrographical analysis of body-of-evidence and through its results was possible to reach a better welding condition, which minimizes the appearance of pores, since the porosity has great influence on the mechanical strength and electrical conductivity of welded pipes

Avaliação da tenacidade à fratura em juntas soldadas circunferenciais de tubulações de processo

This work aims to analyze the toughness of a welded joint in the presence of a crack through the analysis of maximum tension the material can withstand the presence of this type of defect, since a discontinuity is likely to occur in this type of joint and its detection and its design is simple, using non-destructive testing techniques. The study will be conducted through the CTOD test - Crack-Tip Opening Displacement, with type specimens SE (B) - Single Edge Bend taken from a weld in the L-C position in relation to the length (longitudinal axis) of a test tube. The main idea is to simulate the welding conditions for the manufacture of industrial pipes, made in boiler shops (pipe-shop) within petrochemical plants. These pipes are often subject to operation with flammable and toxic subjected to high pressures and temperatures, where one can break the line can cause irreparable damage to the plant, the environment and the health of surrounding communities. With this study we evaluate whether the weld metal has the same properties as fracture toughness of the base material. This study shows the importance of using a qualified welding procedure for performing quality welds while maintaining the properties of the fracture toughness of the base metal. It was found from the results of tests using a welding procedure described for carrying out welding ensures mechanical properties very close to the base metal, which in terms of design is great, since one can ensure that the weld will the same characteristics of the base metal specified for the assembly of the pipe

Avaliação de momentos fletores em estruturas de fundação tipo radier em concreto armado

It aims the comparison of these moments between an analytical plates theory and a computational numerical simulation. It is accented the details of studies about analytical theory as well the process, step by step, of a program that has as an influence the method of finite elements. The theory of plates has an extremely importance when it is talked about slabs and it takes as a base some fundamental hypotheses (that the middle point of the plate is considered flat and under formable) the points that are normal in relation to the middle surface is not considered because of its intensity that is irrelevant in comparison to the rest. The computational programs offer good results when they are applied in a correct way and, it resolves numerous functions in a short period of time. The objective is to highlight the importance of bending moments, its points of maximum and minimum, that has the objective of realize a good reinforcement sizing for a reinforced concrete. Furthermore, it can propitiate an economy in places that is demanded a small quantity of steel, before dimensioned for a load that is distributed in all the surface of the plate, at the same intensity

Proposta de um processo de categorização de fornecedores para a execução de projetos

Nowadays, in business environment, organizations seek to differentiate through special programs and plans, taking the concepts of sustainability, performance and benefits generated for society. Based in this competitive environment, as companies depend on the use of subcontractors to perform services for your different customers, the work performed by them is directly related to the vision created by the final customer’s vision of the company responsible for the project. Considering that the supplier hired to execute the project does not share the strategic concepts related to the level of services to be offered to the final customers, thus creating the need to develop methods that enable the alignment between the project owner, responsible for preparing the executive project, and the supplier, responsible for the execution of the work. Tangent to this need, it was necessary to create a method of evaluation and categorization for suppliers to hired for the projects. As a result it has been proposed a process of categorization of suppliers, through the restriction of possible companies to be hired for a project designed to promote alignment between strategies and continuous improvement of the solutions offered to the market

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate

Avaliação da toxicidade do azocorante Acid Red 114 antes e após processo de biodegradação por meio de um consórcio de microorganismos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Degradação de efluentes da indústria têxtil pelo processo eletrolítico e avaliação ecotoxicológica em diferentes níveis tróficos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da autozigosidade em vacas Nelore (Bos indicus) através de genótipos SNP de alta densidade

Pós-graduação em Medicina Veterinária - FCAV

Avaliação do processo de reparação tecidual após Exérese realizada com bisturi convencional e bisturi harmônico Harmonic® de necrose induzida em língua de rato: estudo macroscópico e histológico

Pós-graduação em Biopatologia Bucal - ICT

Avaliação da remoção de sulfametoxazol, diclofenaco e 17β-estradiol em água por meio de processo oxidativo com cloro

Pós-graduação em Engenharia Civil - FEIS

Avaliação, gestão e novas possibilidades para emancipação na perspectiva de transformação social

Este texto discorre sobre diferentes concepções de avaliação, que, uma vez materializadas nos instrumentos, devem possibilitar reflexões sobre o estado do objeto avaliado e sobre as práticas educativas que promovem mudanças ou se perpetuam pela reprodução. Destaca a questão do uso de indicadores de forma crítica e busca, nos argumentos que fundamentam essa criticidade, o respaldo para reorientar a gestão educativa. Nesse sentido, discute a intencionalidade da avaliação institucional e dos programas de avaliação de resultados dos sistemas de ensino. Oferece ainda algumas pistas para que, na perspectiva da gestão, as ações avaliativas, pelo seu potencial regulador, tenham participação efetiva na qualificação dos processos educativos. A avaliação, enquanto instrumento de regulação do processo de gestão, o reconstrói.

Desenvolvimento de um instrumento multidimensional para avaliação de práticas de ensino no processo de aprendizagem

Pós-graduação em Engenharia Mecânica - FEG

Avaliação dos aspectos de processo no torneamento de madeiras tratadas termicamente

Pós-graduação em Engenharia Mecânica - FEG

Avaliação comparativa do processo de incorporação de bloco sintético bifásico, e do osso autógeno: estudo histológico, histométrico e imunoistoquímico em coelhos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)