Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.

Articulação entre política agrícola e ambiental: uma análise do caso brasileiro

O modo de produção agrícola vigente é causador de impactos ambientais. Estes impactos podem ser representados, por exemplo, pela devastação de matas e florestas com o intuito de expandir a fronteira agrícola, a erosão do solo e a poluição das águas, da terra e do ar. Este trabalho mostra que a relação entre a atividade agrícola e o meio ambiente não precisa ser litigiosa, podendo conviver de forma harmônica. Para isso, foram estudados os programas criados pelo Ministério da Agricultura, Pecuária e Abastecimento (MAPA) que articulam as políticas ambientais e agrícolas em prol do desenvolvimento sustentável. São exemplos destes programas a Integração Lavoura-Pecuária-Floresta (ILPF), o plantio direto na palha e o programa Agricultura de Baixo Carbono (ABC)

Avaliação dos efeitos da poluição sobre a atividade alimentar de Astyanax fasciatus e a diversidade da ictiofauna do Ribeirão Claro - SP

Devido à alta ação antrópica em rios, lagos e mares, a ictiofauna sofre sérios impactos que podem prejudicar sua dinâmica populacional. No interior do estado de São Paulo, muitos municípios captam águas superficiais para o abastecimento urbano e lançam seus efluentes à jusante da captação. Pode-se dizer que o mesmo acontece com o município de Rio Claro. O presente trabalho de conclusão de curso avaliou os efeitos da poluição de despejos orgânicos sobre a diversidade da ictiofauna e a alimentação, a reprodução e o fator de condição de Astyanax fasciatus, levando em consideração a sazonalidade e a variação de parâmetros físico-químicos da água comparando dois pontos do Ribeirão Claro (Rio Claro – SP) no interior da “Floresta Estadual Edmundo Navarro de Andrade”: um à jusante da captação d’água da cidade (área menos poluída) e outro logo após o despejo dos esgotos (área mais poluída). Foram coletados no total 1274 exemplares distribuídos em 26 espécies de peixes nas quatro coletas realizadas. No ponto 1 – área menos poluída, foram coletados 1121 exemplares de 26 espécies nas estações cheia e seca. Na estação cheia foram capturados 401 indivíduos pertencentes a 19 espécies, enquanto que na estação seca foram coletados 720 indivíduos distribuídos em 24 espécies. No ponto 2 – área mais poluída, foram coletados 153 exemplares de 14 espécies. Na estação cheia, foram capturados 141 indivíduos distribuídos em 11 espécies, enquanto que na estação seca foram coletados 12 indivíduos pertencentes a 6 espécies. Dentre os parâmetros estudados, oxigênio dissolvido e coliformes fecais foram um dos mais discrepantes entre os dois pontos e entre as coletas, auxiliando assim, na caracterização do ambiente estudado. No ponto 1, o valor de oxigênio variou de ...(Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da viabilidade econômica do uso de um aquecedor solar de água de garrafas pet para aquecer o ar de uma cabine de pintura e uma estufa de secagem

Nowadays, the biggest part of the world's energy supply comes from fossil fuels and nuclear. However, the current need of the society for the preservation of the environment and wise use of natural resources, has favored the search for alternative energy sources and improvement of energy efficiency. In this new scenario, companies are beginning to mobilize in order to adapt its facilities to renewable energy. Solar, with its immense potential, not really exploited yet, can be very useful for companies that want to beat their sustainability goals. Given these facts, the aim is to evaluate the economic viability of introducing a solar water heater which uses a colorless PET bottle as one of its components in a plant. The hot water generated will heat the air of a paint booth and a warm house, reducing energy consumption, since they are heated by electric heaters

Estudo de cargas térmicas de uma aeronave e dimensionamento de um sistema de ar condicionado

This work deals with the thermal load study of a fictitious aircraft as well as scaling, in terms of the airflow and temperature of the air conditioning system, for heating and cooling of the its internal environment, aiming the thermal comfort of occupants. The first part is presented the techniques and methods utilized for modeling different heat exchanges that occur in the aircraft and then allowed to calculate the total heat load and the airflow and temperature necessary to comply with the requirements of the thermal comfort. Techniques to determine the basic parameters, as convection coefficient and global coefficient of heat exchange, are also presented. The work aims to develop a program, using a computational tool, to automate the calculations so that facilitate this study. It also allows to be used for other airplanes just changing parameters and the control variables related to the specific project. Finally the program performs calculations for a fictitious airplane, to analyze its functionality and the influence of parameters involved in the temperature controls. The program allowed analyzing the sensitivity of portions of the thermal load and the corresponding parameters of influence, as well as the scaling of the air conditioning in terms of airflow and temperature. It was considered, despite the simplifications, a good approximation to the actual values and then can be used in development of the other airplanes

Eficiência energética em ar condicionado e refrigeração através da aplicação da termoacumulação

The use of refrigeration and air conditioning systems is of fundamental importance when it comes to air-conditioning of environments. Also important is the use of electricity for equipments’ operation related to these systems. Due to high cost of charging for this type of energy, factors economy and efficiency occupy key roles among design parameters of a system. One of the ways to get this economy is the use of a technique called thermal storage, or cold storage, which intends to move the required loads during peak time and also their equalizing, so that the energy is transferred from the peak time to non-peak time, thereby reducing the cost of energy consumed. Cold can be stored in the form of ice or ice water. This work aims to perform a technical-economic analysis of a mall located in Vale do Paraíba checking the feasibility of deploying a thermal storage system to achieve an economy in the cost of the energy used by the establishment. Through the parameters measured by the concessionaire of energy we can get the values of energy demand and power consumed, which will serve as basis for calculation for the study. The results obtained allow the development of two alternative proposals to the current configuration, one chosen by the criteria and results presented by technical-economic and energy analysis

Estudo e seleção de um aparelho de ar condicionado para ônibus

The study and selection of an equipment of air conditioner for any type of environment, should be made without overestimate or undersizing the project. The undersizing does not provide an adequate comfort temperature if the environment is too hot because the air conditioner does not remove all the heat necessary in the environment. But if the project is oversized, energy consumption is higher and there is an unnecessary cost. To prevent these failures is necessary to make a calculation of the thermal load on the environment and choose the equipment that has a higher cooling capacity than the calculated heat load and closer to the calculated heat load. In this graduate work will be chosen an air-conditioned equipment for bus, showing the calculations made for the thermal load for various types of heat gain in this type of vehicle. The thermal load on vehicles is more complicated to calculate than in areas because there are several factors that vary with the movement of the vehicle. It will also explain the compression refrigeration cycle, which is the cooling system used in vehicles because it is weightless, compact and lower cost. From the calculated heat load, it will be chosen an air conditioner that best suits the project and, finally, a brief presentation of the selected equipment will be made

Amostragem de poluentes gasosos e particulados emitidos pela queima de biomassa vegetal

The use of biomass as an energy source has been increasing in Brazil, with emphasis on the use of wood biomass, such as bark, wood chips and sawdust, that after receiving the appropriate treatment can be used in burners for power generation. However, from this burning are emitted fine particles known as particulate matter and a wide range of toxic organic and inorganic components in the form of gases that contribute greatly to air pollution and global warming, affecting human health, the environment and climate. The objective of this project was the quantification of gaseous and particulate, using and evaluating the equipment DR4000 ( Dataram 4 ) sampling of particulates smaller than 2.5μm and EUROTRON ( Ecoline 4000 ) when sampling gaseous pollutants, emitted from the burning of biomass in real time in the firing burner to a chimney attached biomass . We note that there are no specific rules that establish emission limits for particulate matter with diameter less than 2.5μm that are most harmful to human health and the highest concentrations reached about 800000μg/m3, for smaller diameters. It is noticeable the need for sampling of pollutants especially in industries that use biomass to fuel that could be implanted emission control equipment

Amostragem de poluentes particulados emitidos pela queima de biomassa em correntes confinadas

It is clear today the ever-accelerating search for new fuels that will eventually replace those that will survive in our society, which are fossil fuels. For this reason, a fuel used since the dawn of humanity and much studied since then, considered the generator of clean, renewable energy, can earn more and more space in the power generation sector, which is biomass. We performed two experiments with two different types of biomass, one from the Amazon rainforest and other pine and eucalyptus as waste from the sawmill UNESP Itapeva. In the first experiment, conducted at the Laboratory of Combustion and Propulsion INPE Cachoeira Paulista were conducted three tests in a chimney with a fan creating forced ventilation, where the biomass was burned and deposited on a support beneath the hood. In the second experiment was conducted to analyze the emission of particulate matter using biomass (waste) from the sawmill on the campus of UNESP experimental Itapeva the burning of it in a burner for heating water for a wood oven. In these experiments we used a particle called DATARAM4 sampler that is capable of sampling both outdoors and inside of pipelines, which is the focus of this work. With this equipment it was possible to measure the concentration of particulate matter in all the firings as above, and compare them to levels acceptable in the current law, always trying to analyze the so-called fine particles, which are those with diameters less than 2.5 μm. Using data obtained from the equipment was also possible to evaluate the diametral distribution of particulate matter in question, and verify which phases of the flares in the concentration and the diameters of the particles are the most critical. In this work we concluded that in all firings conducted concentrations of particulate matter were higher than that allowed by the law, and the diameters were found that are more harmful to human health

Projeto de uma rede de ar comprimido industrial

In this study was shown the historical uses of compressed air by humanity, the general scenario of its uses and the most important steps of a project to set up an industrial network of compressed air, from the selection of a suitable compressor to the design of a distribution network, discussing all the possibilities and their characteristics as well as the feasibility of them. A case study was conducted in a food company where was implemented an industrial compressed air network. Information was collected regarding the consumers points of compressed air, as well as the layout of the new facility, necessary for the development of the distribution system. Two methods were used, analytical and nomogram, which complemented each other to the definition of appropriated tubing, both financially and physically

Contaminação radioativa: aspectos fundamentais associados à poluição nuclear

Since its discovery, radioactivity has brought numerous benefits to human societies. It has many applications in medicine, serving as a tool for non-invasive methods for diagnosis and therapies against diseases such as cancer. It also applies to technologies for energy in nuclear power plants with relatively low impacts on terms of perfect security. All applications, however, have risks, requiring maximum caution to drive processes and operations involving radioactive elements because, once released into the environment, they have extremely harmful effects on organisms affected. This paper presents fundamental concepts and principles of nuclear physics in order to understand the effects of radioactive elements released into the environment, culminating on the issue of radioactive contamination. Literature review allowed us to understand the radioactive contamination problem on living beings. Three major nuclear accidents have happened in the last thirty years, two of them in consecutive years. The nuclear accident at Chernobyl, Ukraine, in 1986, polluted large areas, condemning hundreds of thousands of people to live with consequences of the accident and effects of radiation, killing thousands of people throughout the years. In 1987, a major radiological accident occurred in Goiania (GO) when a source of radioactive cesium was violated, leading to the death of those who had direct or indirect contact with cesium. The most recent accident, in March, 2011, was located at the nuclear power plant in Fukushima Prefecture, Japan, after an earthquake and tsunami hit the region. There is no extensive and accurate knowledge about the consequences of the contamination entailed in that accident, although it is possible to verify signals on a global scale. An analysis of reports of contamination of large areas generated by nuclear plants with release of hazardous wastes suggests it is necessary to rethink the energy matrix of the various countries...

Nitrogênio e fósforo na biomassa de Pistia stratiotes Linnaeus em dois ecossistemas lóticos com diferentes níveis de poluição orgânica da bacia do rio Itanhaém, SP

O objetivo desse trabalho foi avaliar as possíveis diferenças no teor de nitrogênio e fósforo na biomassa de Pistia stratiotes, que coloniza um rio com caracterísicas naturais (Aguapeú) e outro, que recebe grande carga de efluentes domésticos (rio do Poço). Para tanto, foram coletadas amostras de água e indivíduos de P.stratiotes (cinco réplicas) nesses rios. Paralelamente foram feitas medidas diretas de variáveis físico-químicas na água (pH, temperatura, condutividade elétrica, salinidade e turbidez). Em laboratório, foram determinados os teores de oxigênio dissolvido e a alcalinidade das amostras de água, bem como as concentrações de nitrogênio orgânico total, nitrogênio orgânico dissolvido, N-amoniacal N-nitrito, N-nitrato, fósforo total, fósforo dissolvido e P-ortofosfato. Os indivíduos de P. stratiotes coletados tiveram o número de folhas, diâmetro da roseta, altura da parte aérea e, o comprimento e volume da raiz medidos logo após a coleta. Esse material vegetal foi separado em biomassa aérea e submersa, seco e moído para a determinação da biomassa e dos teores de nitrogênio e fósforo totais. Observou-se que o rio Poço apresentou anoxia e as maiores concentrações de nutrientes na água. Pistia stratiotes apresentou maior biomassa e teores de nitrogênio e fósforo totais no rio Poço, provavelmente, devido às maiores concentrações de nutrientes deste rio. Por outro lado, a anoxia não foi limitante para o crescimento da espécie nesse rio. A maior proliferação de P stratiotes se deu no rio Poço, em relação ao rio Aguapeú, devido às condições de eutrofização em que se encontra esse ambiente, ocasionada pelo lançamento freqüente de efluentes domésticos, ricos em nutrientes, em seu curso d’água.

Indicação e avaliação de potenciais áreas para implementação de aterros sanitários municipais – Apuí/AM

About eighty percent of the Brazilian municipalities have their residues in environmentally unsuitable sites and socially insalubrious. In this context, in the year 2010, instituted the National Policy on Solid Residues, which aims to integrated management and management environmentally appropriate of solid residues in Brazil (JUCA, 2002).The problem of urban residues is related to its origin and production in the same way that the concept of inexhaustibility and reflexes of compromising the environment, especially the pollution of soil, air and water resources (LIMA, 1995). Seeking a better residues management in the municipality of Apuí / AM and continuing work already started, Plan Solid Residues Management of the Apuí / AM, this work came to propose a better environmental compliance in relation to solid residues compared to 12305/2010 law that established deadlines / timelines on some actions such as landfills and the consequent elimination of environmentally sound disposal of residues by 2014 and thus began a study of potential areas for the implementation of the landfill were evaluated taking into consideration technical aspects (soil, vegetation, climate, hydrography, etc), legislation and Google Earth imagery. The result of the work over the 6 areas proposed by the City Hall was the choice of AREA 4 as the most indicated for the implementation of the landfill for the city of Apuí, which has 18,325 inhabitants (IBGE, 2011); some considerations were made if a new area can be proposed by the city to implement the landfill

Avaliação da expressão proteica de PTEN, MDM2, P53 e AR em lesões proliferativas da próstata canina

Pós-graduação em Medicina Veterinária - FCAV

Aspectos histopatológicos e expressão de receptores hormonais (AR e ERα) na próstata de ratos expostos ao Di-n-Butil-Ftalato (DBP) desde o período fetal, iniciados pela N-Metil-N-Nitrosuréia (MNU)

Tendo em vista a problemática mundial com relação à degradação dos materiais plásticos e sua dispersão no meio ambiente, e diante de estudo realizado anteriormente onde se observou alterações histopatológicas e bioquímicas na próstata de animais expostos ao DBP (Di-N-Butil-ftalato) no período perinatal, este estudo teve por objetivo avaliar o potencial carcinogênico do DBP administrado desde o período fetal e após iniciação pelo MNU em um modelo de carcinogênese prostática. Ratas prenhes foram divididas em 4 grupos experimentais: 2 tratados: n=16/grupo (TDBP100 e TDBP500) e 2 controles: n=8/grupo (CN e CMNU). O grupo TDBP100 foi exposto ao DBP (100 mg/kg) e o TDBP500 a 500 mg/kg do 15º. dia de gestação (DG15) até a 21º. dia pósnatal (DPN21), enquanto que os animais controle receberam o veículo. Após o desmame, os machos foram separados e os grupos tratados e CMNU receberam dose única de MNU (50 mg/Kg, i.p.) na 6ª. semana pós-natal. Metade dos animais tratados (n=8/grupo) continuaram recebendo o DBP (DBP100+ e DBP500+) após o desmame em doses semanais até o dia do sacrifício (DPN180), enquanto os demais foram mantidos pelo mesmo período sem tratamento (DBP100- e DBP500-).Após a aplicação do MNU, os animais foram submetidos a injeções semanais de Cipionato de Testosterona (promotor) 2mg/aplicação. No dia do sacrifício, o sangue foi coletado, os órgãos reprodutores foram pesados e fragmentos do lobo ventral da próstata foram processados para inclusão em resina e Paraplast para as análises estruturais; e imunocitoquímicas para a detecção de AR e ER. Fragmentos de próstata ventral foram congelados e estocados a -80ºC e após extração das proteínas, estas foram destinadas à reação de Western Blot para avaliar a expressão das mesmas proteínas. Houve diminuição na distância anogenital nos animais DBP500 no DPN1 quando comparado com o grupo controle apontando para o efeito efetivo do DBP ...