Interactions in the Agrobacterium-soybean system and capability of some Brazilian soybean cultivars to produce somatic embryos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade da carne de cordeiros Santa Inês puros e mestiços com Texel abatidos com diferentes pesos

Propôs-se avaliar os parâmetros de qualidade pH, cor, perda de peso por cozimento (PPC) e força de cisalhamento (FC) no músculo Longissimus dorsi (LD) e Semimembranosus (SM) de 13 cordeiros machos e 14 fêmeas Santa Inês puro (SI x SI) e o mesmo número de animais Texel x Santa Inês (T x SI), abatidos com 15, 25, 35 e 45 kg PV. A carcaça foi resfriada por 24 horas a 2ºC, realizando-se, durante este período, as medidas de pH. Retiraram-se os músculos LD e SM para as análises de cor, PPC e FC. Utilizou-se um DIC, fatorial 2x2x4, e as médias foram analisadas pelo Proc GLM do programa estatístico SAS. As medidas de pH foram analisadas em parcela subdividida. A queda do pH no LD e SM foi mais acentuada para os animais mais leves. A carne das fêmeas T x SI apresentou pH final maior que a dos machos e cordeiros SI x SI. A luminosidade diminuiu e a intensidade da cor vermelha elevou-se com o aumento do peso de abate. A carne dos machos e dos cordeiros SI x SI apresentou coloração mais vermelha e menos luminosa no LD e SM. A PPC foi menor na carne dos cordeiros mais pesados; no músculo LD, dos machos houve menor perda de água que nos das fêmeas. Os machos tiveram carne mais dura e, com o aumento do peso de abate, houve diminuição de FC, sendo maior para o T x SI para o músculo LD e Santa Inês puro para o músculo SM.

Composição física da carcaça e aspectos qualitativos da carne de bovinos de diferentes raças alimentados com diferentes níveis de energia

Com o objetivo de estudar as características qualitativas da carcaça e da carne de bovinos machos não-castrados abatidos aos 13-14 meses de idade, foram utilizados 16 animais, oito Aberdeen Angus (AA) e oito Hereford (HE), alimentados na fase de terminação com dietas formuladas com dois níveis de energia digestível (ED), o menor 3,07 Mcal/kg de ED (12% de concentrado) e o maior 3,18 Mcal/kg de ED (32% de concentrado). Os animais foram confinados a partir dos 9 meses de idade com peso médio de 220,31 kg e foram abatidos quando, por estimativa, o peso da carcaça atingiu, no mínimo, 190 kg. O delineamento experimental foi o inteiramente casualizado, com quatro tratamentos, em esquema fatorial 2 x 2 (duas raças vs dois níveis de energia). A carne dos animais HE perdeu menos líquido durante os processos de descongelamento e cocção. Além disso, apresentou maior maciez pelo painel de avaliadores e pelo aparelho Shear Force. As carcaças dos animais que receberam o maior nível de energia na dieta apresentaram maior proporção de músculo e, durante o processo de descongelamento, perdeu menos líquido (2,54 vs 7,22%). Quando avaliada pelo aparelho Shear Force, a carne dos animais alimentados com maior nível de energia na dieta mostrou-se mais macia. Verificou-se interação significativa raça ´ nível de energia para o sabor e a coloração da carne, de modo que a carne dos animais AA, alimentados com menor nível de energia, mostrou-se mais saborosa e com melhor coloração.

Qualidade de carnes provenientes de cortes da carcaça de cordeiros e de ovinos adultos

Com o objetivo de estudar as características qualitativas da carne de ovinos de diferentes categorias quanto aos músculos dos cortes da carcaça (paleta, lombo e perna), utilizaram-se 18 ovinos ½ Ile de France ½ Ideal (seis cordeiros não-castrados, seis ovelhas de descarte e seis machos adultos castrados). Os animais foram criados em pasto de capim-tifton 85 e receberam suplementação (concentrado). Os cordeiros foram abatidos aos 32 kg, com aproximadamente 5 meses de idade, e as ovelhas e os machos adultos castrados, com 55 kg e aos 60 meses de idade. Não houve diferenças nos valores de pH 45 minutos e pH 24 horas entre as categorias animais e nos músculos dos cortes da carcaça. A idade de abate influenciou a luminosidade da carne de todos os músculos. O teor de vermelho não diferiu entre os animais adultos, mas foi superior aos valores obtidos na carne dos cordeiros. A carne de animais adultos é mais escura que a de cordeiros. As perdas por cocção no músculo Triceps brachii são maiores que no Longissimus lumborum e Semimembranosus. Os valores de pH e a capacidade de retenção de água são similares entre as categorias animais.

Qualidade e composição química da carne de bovinos de corte inteiros ou castrados de diferentes grupos genéticos Charolês x Nelore

Seventy beef males of three breeding systems (BS), straightbreds Charolais (Ch) and Nellore (Ne), G1 crossbreds: 1/2 Ch + 1/2 Ne (1/2 Ch) and 1/2 Ne + 1/2 Ch (1/2 Ne) and G2 crossbreds: 3/4 Ch + 1/4 Ne (3/4 Ch) and 3/4 Ne + 1/4 Ch (3/4 Ne) were used. The number of animals by genetic group was, respectively, 15, 12,8, 12,14 and 9. Thirty-five males were castrated (C) at seven months and 35 were kept intact (1). The animals were feedlot finished from 20 to 24 months. The longissimus dorsi muscle was used for the meat evaluation. No significant interaction was observed between genetic composition and sexual condition, for the variables studied. The I males displayed meat with darker color (3.05 vs. 3.78 points) with less amount of marbling (4.26 vs. 5.75 points) and less amount of ether extract (1.73 vs. 2.88%). However they presented larger (66.03 vs. 60.50 cm(2)) longissimus dorsi area and meat with better palatability, juiciness and tenderness. Ch animals had larger longissimus dorsi than the Ne. In the G I group, the 1/2 Ch meat showed larger amount of marbling and ether extract and less cooking losses than the 1/2 Ne meat. Between G2 animals, the 3/4 Ne showed meat with larger thawing losses and larger amount of ether extract. In G1 animals meat, the heterosis level reached 18.54% for longissimus dorsiarea, 28.10% for ether extract and 64.01% for amount of marbling. In G2, the heterosis was -17.30% for lean texture and 10.40% for longissimus dorsi area.

The use of extruded feed in fish food

In our country, the intensive culture of fish has been making progress due to the availability of extruded rations, which are characterized by the way they have been formulated to assist the nutritional demands of the tropical species and for facilitating a better practice of alimentary handling. This process checks the extruded product density and the desirable physical/chemical aspects to a diet that should be handled in the water, the critical factor of this activity. It is important to emphasize that this product stays to the surface of the water, facilitates the consumption control and the observation of the general aspects of the school of fish, as well as guaranteeing that no deterioration of the physical/chemical characteristics of the water occurs. The floating characteristic of the extruded ration is preferable for farmers because most of the tropical species feed at the surface of the water. In some cases, in the function of the alimentary habit, the thermal conditions of the water and the handling system produce granules with different densities. This is due to the humidity and the applied cooking heat, which modifies the time of hydration, and consequently the ability to float. To establish the physical presentation idea for a ration for tropical fishes, it is necessary that the pellets come in sizes, textures, humidities and densities in order to allow for the different phases of the lives of the fishes. This ration should be the result of characteristics of the species, such as the anatomophysiologics particularities, alimentary habits, digestive capacity and alimentary behavior. Only in this way is it possible to offer to those fishes a ration whose nutritious value and physical presentation facilitate the best biological and economic answers.Those aspects need to be reviewed because the tropical species that are cultivated in our country present selective behavior in relation to the size of the pellet. Generally, this has access to the digestive system without waste; the digestibility, therefore, is dependent upon the size of the particles and the physical aspects of the pellets. They should still consider that those granules could be less abrasive and softer. The extruded rations available in the national market present a qualitative reference to its proteic level, whose consequence allows us to infer that those are overestimated for the final phase of those fishes. Thus, the final cost of production is made unfeasible. In this point of view of the development of the national fish culture, and the growing adoption of the intensive system of production, it can link that such progress is a function of the availability of the rations in the extruded form. Although this technique of processing of rations has revolutionized the market in such a way that has been seen as preferable for farmers, some feel that there is a lack of products best suited for the initial phases of fingerlings production.

Relationship between Candida and nocturnal denture wear: quantitative study

The purpose of this study was to evaluate the relationship between Candida and denture wear during the night. Twenty-four edentulous volunteers were randomly divided into two groups. Group I (GI, n = 11) was composed of volunteers who wore their complete dentures day and night and Group H (GII, n = 13) was composed of volunteers who wore their complete dentures only during the day. Three examination periods were performed for both groups. In GI, the first examination (A) was carried out after overnight denture wearing. Subsequent examinations were conducted after one (B) and seven nights (C) without denture use during sleep. In GII, the first (A) was done without previous use during sleep, and the following were carried out after one (B) and seven nights (C) of overnight denture wearing. Total un-stimulated saliva was collected in a sterile container and cultured in duplicate inside Petri dishes. The values of colony forming units (CFU mL(-1) +/- s.d.) were obtained: GI A - 10.1 x 10(3) +/- 1.2 x 10(4), B - 2.0 x 10(3) +/- 2.6 x 10(3), and C - 2.6 x 10(3) +/- 5.9 x 10(3) and GII: A - 0.4 x 10(3) +/- 0.6 x 10(3), B - 9.4 x 10(3) +/- 17.7 x 10(3) and C - 6.3 x 10(3) +/- 15.3 x 10(3). The mean counts for Candida sp. were expressed as log (CFU + 1) mL(-1) and statistical significance of differences among groups was tested by ANOVA (alpha = 0.05). Multiple comparisons were performed according to Bonferroni test and indicated significant differences between A-B and A-C, but not between B and C for both groups. It was concluded that there is a significant relationship between continuous denture wear and Candida sp.

Cytotoxic effects of cleansing solutions recommended for chemical lavage of pulp exposures

Purpose: To evaluate the in vitro cytotoxic effects of three cleansing solutions used for chemical lavage of pulp exposures. Materials and Methods: the immortalized odontoblast cell line (MDPC-23) was plated (30,000 cells/cm(2)) and incubated for 72 hrs in 24-well dishes. After counting the cell number under inverted light microscopy, 20 mul of the experimental and control solutions were added to 980 mul of fresh culture medium. Then, hydrogen peroxide (3%, H2O2), sodium hypochlorite (6%, NaOCl) or calcium hydroxide-saline solution (5g of Ca(OH)(2) in 10 mi of sterile distilled water) were added to wells for experimental Groups 1, 2 and 3, respectively. The positive and negative control groups received Syntac Sprint bonding agent (SS) and phosphate buffered saline (PBS), respectively. Following incubation for 120 min the cell number was counted again, the cell morphology was evaluated by scanning electron microscopy (SEM) and the cell metabolism was determined by the methyltetrazolium (MTT) assay. The scores obtained from cell counting and MTT assay were analyzed with an ANOVA followed by Fisher's PLSD tests. Results: H2O2 NaOCl solutions, and SS bonding agent were more cytotoxic than Ca(OH)2 or PBS. In the groups with H2O2 Or SS, only a few cells remained attached to the bottom of wells. The difference between these two groups was not statistically significant. H2O2, NaOCl and SS depressed the mitochondrial enzyme response by 97.7%, 97.3%, and 95.0%, respectively. on the other hand, Ca(OH)2 depressed the metabolic activity of cells by only 5%. While H2O2, NaOCl and SS caused extreme changes on the cell morphology, neither Ca(OH)2 nor PBS promoted dramatic changes in the cell morphology.

Desempenho em pastagens e características de carcaça da 16a progênie dos rebanhos Nelore, Guzerá e Caracu de Sertãozinho (sp)

Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.

Thermo-physical properties of cooked ham

Experimental studies were carried out to determine thermal conductivity (k), thermal diffusivity (alpha), specific heat at constant pressure (c(p)), and density (rho) of cooked ham as functions of both sample moisture content (M) and temperature (T). Thermal conductivity was measured using the heat-line-source probe, thermal diffusivity by Dickerson method, specific heat by differential scanning calorimeter, and density by pycnometer assembly. Temperature ranged from 3.0 degrees C to 74.0 degrees C, corresponding to the cooking process, and moisture ranged from 40.0 to 73.0% (w. b.). Equations are provided for alpha as a function of M, c(p) as a function of T, and rho as a function of both M and T. Results for thermal conductivity are compatible with those published in the literature.

Effects of auxins and boron on rooting of kiwi stem cuttings (Actinidia chinensis Pl cv Matua)

This work studies the effects of some synthetical auxins and boron in the rooting of stem cuttings of kiwi (Actinidia chinensis Planch cv Matua). The stems used had two nodes and two leaves cut in half. The auxin effect was observed through seven different treatments: T1 (H2O); T2 (NAA 300 ppm); T3 (IBA 300 ppm); T4 (NAA 300 ppm + B); T5 (IBA 300 ppm + B); T6 (NAA 0,5%-talc) and T7 (IBA 0,5%-talc), applied to the bases of stem cuttings. After these treatments, the cuttings were placed in suitable rooting dishes, with pure vermiculite in misty nebulization chamber for 120 days until collection day. The evaluation of auxin and boric acid effects were made based on the following observations: 1. The percentage of rooted stem cuttings; 2. reducing sugar and total sugar analyses; and 3. tryptophan analyses. The effects of such treatments were observed in the four seasons. The results showed that winter is best for rooting. Application of IBA talc 0,5% to the cuttings bases increased rooting.

Action of auxins, boron and harvest season on the rooting of kiwi fruit stem cuttings (Actinidia chinensis Pl cv Monty)

Action of auxins on the rooting of stem cuttings of kiwi (Actinidia chinensis P. cv Monty). This work studies the effects of some synthetic auxins and B in the rooting of kiwi (Actinidia chinensis Planch cv Monty) stem cuttings. The treatments used were as follows: T1 (H2O); T2 (NAA 300 ppm); T3 (IBA 300 ppm); T4 (NAA 300 ppm + B); T5 (IBA 300 ppm + B); T6 (NAA 0,5%-talc) and T7 (IBA 0,5%-talc), applied to the bases of the cuttings. These were then placed in rooting dishes with pure vermiculite in a misty nebulization chamber until collection day (120 days). The evaluation of auxin and boric acid effects on kiwi stem cuttings were made based on the following observations: 1. The percentage of rooted stem cuttings; 2. reducing sugars and total sugar analyses (in g/100 g of dry matter); and 3. tryptophan analyses (in mu g/100 mg of dry matter). The results show that summer is the best season for rooting Actinidia chinensis Planch cv Monty stem cuttings. The use of IBA talc 0,5% on the bases of the cuttings shamed positive results too.

Influence of low and high levels of grain defects on maize wet milling

Yields and starch pasting characteristics obtained from wet milling of maize samples with low and high levels of defect grains were compared to those from sound samples. Defect grain groups ere established taking into account the defect degree. Thus the first group consisted of fermented, molded, heated and sprouted grains and the second of insect damaged. hollow, fermented (up to 1/4) grains and those injured by other causes. The grain groups, if present at low levels in the samples, 10% for first group and 17% for second group did not affect the chemical composition of starch and its pasting properties. obtained by the rapid visco analyser. Samples with high levels of grain groups (up to 100%). affected wet milling yields and starch viscosity. Samples with 100% of grains in the first group decreased starch, germ yield and peak viscosity and increased gluten yield. Samples with 100% of grains in the second group decreased germ and fiber yield but increased starch yield. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Effects of light-curing time on the cytotoxicity of a restorative resin composite applied to an immortalized odontoblast-cell line

This in vitro study evaluated the cytotoxic effects of a restorative resin composite applied to an immortalized odontoblast-cell line (MDPC-23). Seventy-two round resin discs (2-mm thick and 4 mm in diameter) were light-cured for 20 or 40 seconds and rinsed, or not, with PBS and culture medium. The resin discs were divided into four experimental groups: Group 1: Z-100/20 seconds; Group 2: Z-100/20 seconds/rinsed; Group 3: Z100/40 seconds; Group 4: Z-100/40 seconds/rinsed. Circular filter paper was used as a control material (Group 5). The round resin discs and filter papers were placed in the bottom of wells of four 24-well dishes (18 wells for each experimental and control group). MDPC-23 cells (30,000 cells/cm(2)) were plated in the wells and allowed to incubate for 72 hours. The zone of inhibition around the resin discs was measured under inverted light microscopy; the MTT assay was carried out for mitochondrial respiration and cell morphology was measured under SEM. The scores obtained from inhibition zone and MTT assay were analyzed with the Kruskal-Wallis followed by Dunnett tests. In Groups 1, 2, 3 and 4, the thickness of the inhibition zone was 1,593 +/- 12.82 mum, 403 +/- 15.49 mum, 1,516 +/- 9.81 mum and 313 +/- 13.56 mum, respectively. There was statistically significant difference among the experimental and control groups at the 0.05 level of significance. The MTT assay demonstrated that the resin discs of the experimental groups 1, 2, 3 and 4 reduced the cell metabolism by 83%, 40.1%, 75.5% and 24.5%. Only between the Groups 2 and 4 was there no statistically significant difference for mitochondrial respiration. Close to the resin discs, the MDPC-23 cells exhibited rounded shapes, with only a few cellular processes keeping the cells attached to the substrate or, even disruption of plasma membrane. Adjacent to the inhibition zone, the cultured cells exhibited multiple fine cellular processes on the cytoplasmic membrane organized in epithelioid nodules, similar to the morphology observed to the control group. Based on the results, the authors may conclude that the Z-100 resin composite light cured for 20 seconds was more cytopathic to MDPC-23 cells than Z-100 light cured for 40 seconds. The cytotoxic effects of the resin discs decreased after rinsing them with PBS and culture medium. This was confirmed by MTT assay and upon evaluation of the inhibition zone, which was narrower following rinsing of the resin discs.

Características físico-químicas, cozimento e produtividade de mandioca cultivar IAC 576-70 em diferentes épocas de colheita.

The instability of cassava culinary quality is a problem in the market. This work had the purpose of evaluating the interference of the productivity, rain precipitation and physical-chemical characteristics on the cooking time of the IAC 576-70 cultivar, from the 6(th) to the 12(th) month after the planting. The physical parameters evaluated were: difficulty in peeling (easy, medium, and hard), difficulty in cutting in long, thin sticks with a manual machine, being those cut in a subjective way. In the analysis of the cooked root, the percentage of water absorbed into the cassava pieces, the color, white points formed inside the pieces of cassava, gel formation around the pieces of cassava, and cooking time were evaluated. The pH, acidity, moisture, ashes, fibers, ether extract, protein, reducing sugars, and starch of the roots were also monthly evaluated. From the results obtained in the present work, it may be concluded that the cassava IAC 576-70, when planted in July, in Botucatu-SP area, must be harvested at the age of nine months, without damage to the productivity, starch level and root cooking, and the harvest could be extended up to ten months. The producers should follow the sum of precipitation index ten days before the harvest, and this value should be the smallest as it may be and the producers should not harvest when this value is more than 100 mm, in order not to hinder the cooking of the root.