Histological evaluation of the bone repair using mineral trioxide aggregate combined to a material carrier

The aim of this study was to present a possible carrier for MTA, monoolein gel, with the objective to maintain this material in the place that was inserted and verify if this procedure is able to optimize its action. The data were evaluated by histomorphometric method and submitted to statistical analysis. The histological responses observed in this study indicate that the MTA is a reliable material and should be considered effective in bone periapical defects and the monoolein gel was capable to maintain the MTA in situ.

Desempenho ponderal de novilhas mestiças Holandês x Zebu submetidas a duas estratégias de suplementação mineral

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Calcium silicate and organic mineral fertilizer applications reduce phytophagy by Thrips palmi Karny (Thysanoptera: Thripidae) on eggplants (Solanum melongena L.)

Thrips palmi Karny (Thysanoptera: Thripidae) is a phytophagous insect associated with the reduction of eggplant productivity. The aim of this study was to evaluate the effect of calcium silicate and/or an organic mineral fertilizer, together or separately, in increasing the resistance of eggplants to T. palmi. The treatments were calcium silicate, organic mineral fertilizer, calcium silicate associated with this fertilizer and the control. Mortality and number of lesions caused by nymphs of this insect on eggplant leaves were evaluated after 3, 6, 9 and 12 leaf applications of these products. The calcium silicate and the organic mineral fertilizer reduced both the population of T. palmi and the damage caused by its nymphs, suggesting a possible increase in eggplant resistance to this pest as a result of the treatments.

Evaluation of two mineral trioxide aggregate compounds as pulp-capping agents in human teeth

Aim: The present randomized, controlled prospective study evaluated the histomorphological response of human dental pulps capped with two grey mineral trioxide aggregate (MTA) compounds. Methodology: Pulp exposures were performed on the occlusal floor of 40 human permanent pre-molars. The pulp was capped either with ProRoot (Dentsply) or MTA-Angelus (Angelus) and restored with zinc oxide eugenol cement. After 30 and 60 days, teeth were extracted and processed for histological examination and the effects on the pulp were scored. The data were subjected to Kruskal-Wallis and Conover tests (α = 0.05). Results: In five out of the 40 teeth bacteria were present in pulp tissue. No significant difference was observed between the two materials (P > 0.05) in terms of overall histological features (hard tissue bridge, inflammatory response, giant cells and particles of capping materials). Overall, 94% and 88% of the specimens capped with MTA-Angelus and ProRoot, respectively, showed either total or partial hard tissue bridge formation (P > 0.05). Conclusions: Both commercial materials ProRoot (Dentsply) and MTA-Angelus (Angelus) produced similar responses in the pulp when used for pulp capping in intact, caries-free teeth. © 2009 International Endodontic Journal.

Correlação entre a densidade mineral óssea e níveis séricos de cálcio, fósforo e fosfatase alcalina total em gatos após tirotoxicose experimental

Hyperthyroidism is and endocrinal dysfunction characterized by excessive serum concentrations of thyroid gland hormones, which can cause several effects on the bone tissue in humans and in animals. For a better characterization of thyrotoxicosis effects on bone metabolism, 16 cats were induced into hyperthyroid state. Results showed that, in some moments a major bone demineralization of the right distal radium estremity promoted an elevation of the serum levels of phosphorus and total alkaline phosphatase.

Utilização do coque verde de petróleo da Petrobras em substituição parcial ao carvão mineral das misturas injetadas em altos fornos

The Petrobras produced green petroleum coke (GPC) is a carbon rich fuel, virtually ash-free, with low sulfur content, and is a fuel suitable to replace metallurgical coke in blast furnaces. The GPC was tested in a pulverized coal injection simulator built in the Volta Redonda research center. It presented a low burning efficiency due to low volatile material content and high substitution rate by the carbon content. The tests were carried out in blast furnaces with ≤ 50% Petrobras GPC in the coal blends. The injected coal/CVP mixtures produced no negative side effects in the blast furnace grinding systems, pneumatic conveying, or operating process. The mixture burning process inside the blast furnace showed a decrease in fuel consumption, with a significant reduction in metallurgical coke consumption. The industrial-scale tests of the GPC mixtures did not reach the 70% maximum for lack of the GPC feedstock, which is necessary to continue with standard coal mixtures.

Bone mineral density on conventional and digitized images under different parameters of digitization and storage

Aim: To assess the bone mineral density on conventional and digitized images, comparing whether different parameters of digitization and storage change these values. Methods: Twenty radiographs were taken from five partially dentulous dry mandibles with an aluminum 7-mm stepwedge placed on the superior edge of the film. After processing, the films were digitized with a resolution of 600 and 2,400 d.p.i. and saved as TIFF and JPEG files. On every conventional and digitized image, circular regions of interest were selected for densitometry and radiographic contrast analysis. Results: Pearson's correlation coefficient showed a significant and strong mean gray values association between digitized and conventional images, differing from radiographic contrast that did not show a significant association. ANOVA did not reveal a statistically significant difference in bone density and radiographic contrast among the four digitized image groups, but the conventional image contrast was significantly lower. Conclusions: Bone mineral density did not differ in both conventional and digitized images. The parameters of image compression and resolution, tested in this study, did not change the results of densitometry and digitization process increased the radiographic contrast.

Mapeamento de Paleosuperfícies associadas a identificação de depósitos supérgenos de cobre como ferramenta de exploração mineral na região de Itapeva e Ribeirão Branco- Vale do Ribeira, estado de São Paulo, Brasil

A few examples of supergene ore formation and their interaction with morphogenesis (palaeosurfaces) and weathering mineralogy are discussed. Geomorphological and mineralogical records to characterize palaeosurfaces associate the weathering of primary minerals and their relationship with concentrations of cooper and iron ore deposits in southeastern state of São Paulo, Brazil. We have distinguished two palaeosurfaces generated by several weathering phases and controlled by the geological framework. The first and oldest upper palaeosurfaces (900 - 1000 m a.s.l.), situated in Riberão Branco (Alto do Brancal), were developed on silico-limestones. It is formed by typical iron laterites enriched by secondary products of cooper. The second and younger level palaeosurfaces located in Itapeva (Santa Blandina and Bairro do Sambra). This palaeosurface is formed by copper percolating through the weathered rock (saprolite). Other features can be observed like neo-formed products in laterites. They are classified into two types: clay like silico- cupriferous products (with noticeable amounts of iron) and copper minerals (crysocolla, in their flat slopes). These features allowed the presence of copper ores and their morphogenesis control will help in the exploration and prospecting of supergene ore mineral.

Química mineral e estimativas de pressão e temperatura em rochas metassedimentares do grupo araxá na região de morrinhos, sul do estado de goiás

In the Morrinhos region, Goiás state, Brazil, the rocks of the Araxá Group have mineral assemblages related to the metamorphic peak which occurred in this region and is typical of the amphibolite facies (kyanite zone). These rocks are associated with the initial stage of the main ductile deformation that occurred in this area. Thermobarometric calculations, including the associations, garnet + plagioclase + biotite + muscovite; garnet + plagioclase +biotite + muscovite + kyanite; garnet + plagioclase + biotite + muscovite + amphibole, with quartz in excess, indicate that the metamorphic peak occurred at temperatures of approximately 610°C and pressures in the order of 10 kbar. The P-T path is probably clockwise and is in agreement with the tectonic conditions observed in collisional settings.

Composição mineral da carcaça e dos cortes da carcaça de ovinos jovens e adultos

Aiming to evaluate the mineral composition (iron, calcium and sodium) of the carcass and carcass cuts of meat from different ovine categories, 18 1/2 Ile de France 1/2 Polwarth sheeps (6 uncastrated lambs, 6 discarded ewes and 6 discarded wethers) were used. Animals were in grazing system based on Tifton - 85 pastures and were supplemented with concentrate. Lambs were slaughtered at 32 kg of live weight, at around 5 months of age. Ewes and wethers were slaughtered with 55 kg and 60 months of age. The iron values were differents between categories for those valued cuts muscles, with higher average to legs muscles from adults ovine of 3.86 mg/100g with regard to lambs of 1.91 mg/100g, respectively. The iron values of the muscles from half carcass didn't differ for that animal category, with 3.38 mg/100g average. The calcium values in muscles from half carcass and leg cut were higher to wethers (9.84 e 7.35 mg/100g), intermediaries to ewes (6.28 e 6.54 mg/100g) and smallers values to lambs (5.30 e 4.22 mg/100g). There wasn't differences for sodium values to valued categories and muscles, with values around 56.75 mg/100g. In conclusion, the sodium values are similar between animals categories and from differents carcass muscles and that the iron and calcium values present differences.

Effect of different radiopacifying agents on the physicochemical properties of white portland cement and white mineral trioxide aggregate

Introduction: The aim of this study was to evaluate the pH, calcium ion release, setting time, and solubility of white mineral trioxide aggregate (WMTA) and white Portland cement (WPC) combined with the following radiopacifying agents: bismuth oxide (BO), calcium tungstate (CT), and zirconium oxide (ZO). Methods: Fifty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH and calcium release (atomic absorption spectrophotometry) at 3, 24, 72, and 168 hours. For evaluation of setting time, each material was analyzed according to the American Society for Testing and Materials guidelines 266/08. The solubility test was performed according to American National Standards Institute/American Dental Association specification no. 57/2000. Solubility, setting time, and pH values were compared by using analysis of variance and Tukey test, and the values of calcium release were compared by the Kruskal-Wallis and Miller tests. The significance level was set at 5%. Results: The pH and calcium release were higher at 3 and 24 hours. WPC was the material with the higher values for both properties. WMTA had the greatest solubility among all materials (P <.05). All radiopacifiers increased the setting time of WPC, and WMTA had the shortest setting time among all materials (P < .05). Conclusions: All materials released calcium ions. Except for WPC/CT at 168 hours, all materials promoted an alkaline pH. On the basis of the obtained results, ZO and CT can be considered as potential radiopacifying agents to be used in combination with Portland cement. Copyright © 2012 American Association of Endodontists.

Determinação da densidade mineral e da elasticidade óssea após a aplicação de ondas de choque extracorpóreas no terceiro metacarpiano de equinos atletas

The porpoise of this study was to evaluate the effects of extracorporeal shock waves in third metacarpus bone from healthy horses by determination of bone elasticity. It were used 20 Thoroughbred horses, male and female, with two years old, on top of training and selected as the state healthy. At the beginning of the experiment (D0), all animals were submitted for evaluation of bone elasticity held in the third metacarpus bone. The animals were divided into two groups (Control Group - CG and Experimental Group - EG). The application of extracorporeal shock wave therapy (ESWT) was performed on the right forelimb of the animals in the experimental group in the same place evaluated for bone elasticity and was used apparatus for extracorporeal therapy of waves with 0.15 mJ/mm2 energy flux density and 2000 pulses with E6R20 probe, with focus feature of the shock wave of 20 mm. The ESWT were repeated every 21 days, a total of three sessions (D0, D21 and D42). The analysis of bone elasticity determination was realized at D21, D42 and D72. The average of speed ultrasound differed between groups at D21, D42 and D72, and the animals from EG had lower bone mineral density after applications of ESWT. There was also difference in the analysis of bone mass (Z-Score) between the groups at D21 and D42, which animals from EG showed a significant decrease in bone mass. The risk of fracture was higher in animals from experimental group at D21. It was concluded that ESWT is able to promote change in bone mineral density.

Influence of organic and mineral soil fertilization on essential oil of Spilanthes oleracea cv. Jambuarana

In the present study, the composition of essential oil of leaves and inflorescences of jambu (Spilanthes oleracea. Jambuarana), under organic manuring and mineral fertilization, was stuhed. Jambu plants show important chemical properties and their production has been addressed for the extraction of the essential oils for cosmetics industries, due to their pharmacolopcal properties. The experimental area of treatments contained urea as mineral fertilizer (120 g m2), applied twice and organic fertilizer (8 kg m2), applied at the planting. Jambu leaves and flowers were harvested twice: the first at 90 days after seedling transplantation and at the opening of the flower buds. Branches were cut at 7 cm from the soil, thus new branches can bud for the accomplishment of the second crop which happened 40 days after the re-budhng. The essential oil was analyzed by gas chromatography coupled with mass-spectrometry. According to our results the most representative compounds were trans-caryophyllene, germacrene-D, 1-dodecene, spathulenol and spilanthol (a compound presenting anesthetic properties) occurring in inflorescences. Fertilization procedure does not affect the content and the quality of the essential oil in Jambu plants. © 2012 Academic Journals Inc.

Mineral water: A microbiological approach

The microbiological quality of bottled mineral water of various domestic brands sold in Brazil was investigated, with particular focus on the heterotrophic plate count (HPC). Neither total coliforms nor Escherichia coli were found in any 1.5 L bottle samples. Total coliforms were found in 2.9% of the small bottles, while in 20 L bottles the presence of total coliforms and E. coli was demonstrated in 15.5 and 2.4% of samples, respectively. Pseudomonas aeruginosa was detected in 4.3, 4.5 and 9.5% of small, 1.5 and 20 L bottles, respectively. In 36.4% of the samples of 1.5 L bottles, the HPC was above 500 cfu/mL. This percentage of samples with an HPC above 500 cfu/mL increased to 52.0 and 61.9% in small and 20 L bottles, respectively. Higher contamination by total coliforms, E. coli, P. aeruginosa and HPCs occurred in 20 L bottles. In conclusion, several samples in this study were outside the international quality standard for mineral water and the large number of samples with high HPCs shows that more work must be done on the use of HPC in mineral water and the damaging effects that these microorganisms may cause to humans. The bottled mineral water was confirmed as a particularly important public health problem, due to the poor microbiological quality of the products that are marketed. © IWA Publishing 2012.

Hydrochemical evaluation of bottled mineral waters and spring at Corumbataí city, São Paulo State, Brazil

This investigation was carried out within São Paulo State, Brazil, and involved the sampling of well-known mineral bottled waters for performing a comparative hydrochemical study and of a spring occurring at Corumbataí city, in order to evaluate its suitability for bottling. Several methods were utilized for acquiring the hydrochemical data like the methyl orange end-point titration, potentiometry, ion selective electrode, colorimetry, flame photometry and inductively-coupled plasma spectrometry. The results obtained for the analyzed samples were compared with the guideline values established by the National Commission of Rules and Standards for Food of the Brazilian Health Ministry published in 1976. The Brazilian Code for Mineral Waters that was established by Register 7841 published on 8 August 1945 was also taken into account for verifying if the spring waters are mineralized. The hydrochemical data allowed identify some constituents impoverishing the water quality, thus, implying on its nonutilization for commercial purposes (bottling). In one specific case, the spring water only can become appropriate for human consumption after previous chemical treatment. © 201 WIT Press.