Evaluation of low-level laser therapy effectiveness on the pain and masticatory performance of patients with myofascial pain

This study investigated the effect of low-level laser therapy (LLLT) on the masticatory performance (MP), pressure pain threshold (PPT), and pain intensity in patients with myofascial pain. Twenty-one subjects, with myofascial pain according to Research Diagnostic Criteria/temporomandibular dysfunction, were divided into laser group (n = 12) and placebo group (n = 9) to receive laser therapy (active or placebo) two times per week for 4 weeks. The measured variables were: (1) MP by analysis of the geometric mean diameter (GMD) of the chewed particles using Optocal test material, (2) PPT by a pressure algometer, and (3) pain intensity by the visual analog scale (VAS). Measurements of MP and PPT were obtained at three time points: baseline, at the end of treatment with low-level laser and 30 days after (follow-up). VAS was measured at the same times as above and weekly throughout the laser therapy. The Friedman test was used at a significance level of 5 % for data analysis. The study was approved by the Ethics Committee of the Federal University of Sergipe (CAAE: 0025.0.107.000-10). A reduction in the GMD of crushed particles (p < 0.01) and an increase in PPT (p < 0.05) were seen only in the laser group when comparing the baseline and end-of-treatment values. Both groups showed a decrease in pain intensity at the end of treatment. LLLT promoted an improvement in MP and PPT of the masticatory muscles. © 2012 Springer-Verlag London.

Dynamics of hypernuclear nonmesonic weak decay

Simple and coincidence spectra of the NM weak decay of light hypernuclei have been evaluated in a systematic way for the first time. We have only considered 1N induced processes, neglecting entirely the events induced by 2N emission, as well as the effects of the FSIt's. As the theoretical frameworkwe have used the IPSM with three different parametrizations for the transition potential. The comparison with data strongly suggests that the soft π + K exchange model could be a good starting point to describe the dynamics in the NM weak decays of s- and p-shell hypernuclei. © 2012 American Institute of Physics.

Classification of crucifer cultivars based on the life-history of diamondback moth (Plutella xylostella)

We compared different cultivars and hybrids of crucifers in relation to development and life-history of diamondback moth (Plutella xylostella) to classify the plants according to their resistance to the pest. The plants used were Manteiga da Geórgia kale, Bola de Neve cauliflower, Ramoso Piracicaba Precoce broccoli, Chato-de-quintal cabbage, and the hybrid cabbages Midori, TPC668, TPC308, and TPC681. We evaluated performance daily until the pupal stage. Pupae were assessed individually to determine the pupal weight, performance, and pupal period. We determined the sex ratio, fecundity, fertility, and longevity of the emerged adults and calculated their reproductive potential. Cabbage hybrids TPC668, TPC308, and TPC681 do not support the development and reproduction of the diamondback moth. These hybrids show a level of resistance that is similar to that found the commercially available hybrid Midori and cultivar Chato de Quintal, which are known to be resistant to the diamondback moth. This finding implies that the capitata (cabbage) cultivars are the most suitable for planting because they are more resistant to pest than the cultivar's moth, acephala (kale). © 2013 Copyright Taylor and Francis Group, LLC.

Comparison of eggs, larvae, and pupae of plutella xylostella (lepidoptera: Plutellidae) as prey for podisus nigrispinus (Hemiptera: Pentatomidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Paracoccidoides brasiliensis 30 kDa Adhesin: Identification as a 14-3-3 Protein, Cloning and Subcellular Localization in Infection Models

Paracoccidoides brasiliensis adhesion to lung epithelial cells is considered an essential event for the establishment of infection and different proteins participate in this process. One of these proteins is a 30 kDa adhesin, pI 4.9 that was described as a laminin ligand in previous studies, and it was more highly expressed in more virulent P. brasiliensis isolates. This protein may contribute to the virulence of this important fungal pathogen. Using Edman degradation and mass spectrometry analysis, this 30 kDa adhesin was identified as a 14-3-3 protein. These proteins are a conserved group of small acidic proteins involved in a variety of processes in eukaryotic organisms. However, the exact function of these proteins in some processes remains unknown. Thus, the goal of the present study was to characterize the role of this protein during the interaction between the fungus and its host. To achieve this goal, we cloned, expressed the 14-3-3 protein in a heterologous system and determined its subcellular localization in in vitro and in vivo infection models. Immunocytochemical analysis revealed the ubiquitous distribution of this protein in the yeast form of P. brasiliensis, with some concentration in the cytoplasm. Additionally, this 14-3-3 protein was also present in P. brasiliensis cells at the sites of infection in C57BL/6 mice intratracheally infected with P. brasiliensis yeast cells for 72 h (acute infections) and 30 days (chronic infection). An apparent increase in the levels of the 14-3-3 protein in the cell wall of the fungus was also noted during the interaction between P. brasiliensis and A549 cells, suggesting that this protein may be involved in host-parasite interactions, since inhibition assays with the protein and this antibody decreased P. brasiliensis adhesion to A549 epithelial cells. Our data may lead to a better understanding of P. brasiliensis interactions with host tissues and paracoccidioidomycosis pathogenesis. © 2013 Silva et al.

One-nucleon-induced nonmesonic hypernuclear decay in laboratory coordinates

We present a formalism for the computation of one-nucleon-induced nonmesonic weak hypernuclear decay rates in laboratory coordinates, within an independent-particle shell model framework, with a view to its generalization to the case of two-nucleon-induced transitions. © 2013 AIP Publishing LLC.

Quality control of Cotesia flavipes (Cameron) (Hymenoptera: Braconidae) from different Brazilian bio-factories

The goal of this study was to evaluate the quality of Cotesia flavipes from different bio-factories as biological control agents. We evaluated biological characteristics of the parasitoids throughout their lifespan, and measured the body length and width, abdomen width, thorax width and width and length of the right forewing of female and male parasitoids. Our results showed that the number of males and pupal viability were similar among the bio-factories; the number of emerged females was greater in bio-factories I and II; the egg-pupa period and the pupal period were shorter in bio-factory IV; and a greater longevity was found in bio-factories II and III. Sex ratio (at approximately 60% females) was satisfactory (in terms of suitability for release) across all bio-factories. For morphometric measurements, the body, abdomen and wing widths were similar in males; however, thorax width was greater in the males from bio-factory I; bio-factory III produced females with the highest body length; bio-factory I produced females with the greatest abdomen width; bio-factories III and IV produced females with the greatest wing length. Among the bio-factories studied, bio-factory IV produced the best quality C. flavipes, with respect to the greatest number of parasitoids per pupal mass (a mean of 57% more parasitoids) in a satisfactory sex ratio, and with the shortest developmental time, which facilitates faster rearing in the laboratory. Studies such as this, which assess the quality of a mass-produced C. flavipes, are crucial for the continued use of this parasitoid in controlling Diatraea saccharalis in the field. © 2013 Copyright Taylor and Francis Group, LLC.

Cinnamic acid is partially involved in propolis immunomodulatory action on human monocytes

Propolis is a beehive product used in traditional medicine due to its biological properties. It shows a complex chemical composition including phenolics, such as cinnamic acid (Ci). The mechanisms of action of propolis have been the subject of research recently; however, the involvement of Ci on propolis activity was not investigated on immune cells. Ci effects were evaluated on human monocytes, assessing the expression of Toll-like receptors (TLRs), HLA-DR, and CD80. Cytokine production (TNF-α and IL-10) and the fungicidal activity of monocytes were evaluated as well. Data showed that Ci downregulated TLR-2, HLA-DR, and CD80 and upregulated TLR-4 expression by human monocytes. High concentrations of Ci inhibited both TNF-α and IL-10 production, whereas the same concentrations induced a higher fungicidal activity against Candida albicans. TNF-α and IL-10 production was decreased by blocking TLR-4, while the fungicidal activity of monocytes was not affected by blocking TLRs. These results suggest that Ci modulated antigen receptors, cytokine production, and the fungicidal activity of human monocytes depending on concentration, and TLR-4 may be involved in its mechanism of action. Ci seemed to be partially involved in propolis activities. © 2013 Bruno José Conti et al.

Genome-wide association study for birth weight in Nellore cattle points to previously described orthologous genes affecting human and bovine height

Background: Birth weight (BW) is an economically important trait in beef cattle, and is associated with growth- and stature-related traits and calving difficulty. One region of the cattle genome, located on Bos primigenius taurus chromosome 14 (BTA14), has been previously shown to be associated with stature by multiple independent studies, and contains orthologous genes affecting human height. A genome-wide association study (GWAS) for BW in Brazilian Nellore cattle (Bos primigenius indicus) was performed using estimated breeding values (EBVs) of 654 progeny-tested bulls genotyped for over 777,000 single nucleotide polymorphisms (SNPs).Results: The most significant SNP (rs133012258, PGC = 1.34 × 10-9), located at BTA14:25376827, explained 4.62% of the variance in BW EBVs. The surrounding 1 Mb region presented high identity with human, pig and mouse autosomes 8, 4 and 4, respectively, and contains the orthologous height genes PLAG1, CHCHD7, MOS, RPS20, LYN, RDHE2 (SDR16C5) and PENK. The region also overlapped 28 quantitative trait loci (QTLs) previously reported in literature by linkage mapping studies in cattle, including QTLs for birth weight, mature height, carcass weight, stature, pre-weaning average daily gain, calving ease, and gestation length.Conclusions: This study presents the first GWAS applying a high-density SNP panel to identify putative chromosome regions affecting birth weight in Nellore cattle. These results suggest that the QTLs on BTA14 associated with body size in taurine cattle (Bos primigenius taurus) also affect birth weight and size in zebu cattle (Bos primigenius indicus). © 2013 Utsunomiya et al.; licensee BioMed Central Ltd.

Innovative winemaking: Consumer acceptance of red table wines

Purpose: This paper aims to evaluate the consumer acceptance of Bordô and Isabel wines from innovative winemaking in order to increase red wine consumption by consumers to obtain nutritional benefits. Design/methodology/approach: All wines were produced by a standard procedure of vinification. Pre-drying treatment aimed at drying the grapes up to 22°Brix and static pomace wines presented the constant contact between the must and pomace. Sensory acceptance was carried out by 80 consumers who evaluated eight samples (six experimental wines and two commercial wines) concerning the attributes: appearance, aroma, body, flavor and overall acceptance. Findings: Experimental wines presented higher acceptance when compared to commercial wines and cluster analysis shows the splitting of consumer preferences, highlighting the higher acceptance of traditional Bordô wine and static pomace samples in all sensory attributes. Pre-drying process enhances the concentration of coloured compounds, to highlight the appearance acceptance of these samples. Research limitations/implications: Although this paper has limited the consumer acceptance of red table wines, the innovative treatments will be applied in Vitis vinifera red wines. Practical implications: The wide acceptance of static pomace and pre-drying wines has promoted further information about innovative winemaking that can be applied in Brazilian and worldwide wineries. Social implications: The innovative treatments can change sensorial features of wines and therefore influence the choice of consumers as well as enhancing the nutritional benefits of red wines. Originality/value: The pre-drying and static pomace winemaking are the novelty of this study and the wide acceptance of the sensory attributes concerning these treatments indicates the potential for application in wineries. © Emerald Group Publishing Limited.

Determination of the force systems produced by different configurations of tear drop orthodontic loops

Objective: To determine the mechanical characteristics of teardrop loop with and without helix fabricated using different metal alloy compositions (stainless steel and beta-titanium), submitted to different intensities of bends preactivation (0° and 40°), and with different cross-sectional dimension of the wire used to build these loops (0.017 x 0.025-in and 0.019 x 0.025-in). Methods: Eighty loops used to close spaces were submitted to mechanical tests. The magnitudes of horizontal force, the moment/force ratio, and the load/deflection ratio produced by the specimens were quantified. Loops were submitted to a total activation of 5.0 mm and the values were registered for each 1.0 mm of activation. For statistic data analysis, a analysis of variance was performed and a Tukey's Multiple Comparison test was used as supplement, considering a 5% level of significance. Results: In general, teardrop loops with helix produced lower magnitudes of horizontal force and load/deflection ratio, and higher moment/force ratio than teardrop loops without helix. Among all analyzed variables, metal alloy composition presented greater influence in the horizontal force and in the load/deflection ratio. The moment/force ratio showed to be more influenced by the preactivation of loops for space closure. © 2013 Dental Press Journal of Orthodontics.

Influence of two different vinification procedures on the physicochemical and sensory properties of Brazilian non-Vitis vinifera red wines

The objective of this study was to evaluate the association between the physicochemical properties and sensory acceptance of Brazilian red wines by applying chemometric techniques. Therefore, three winemaking processes were carried out: a traditional winemaking process and two novel winemaking processes, pre-drying and static pomace. Significant differences could be identified amongst the physicochemical properties of the wines (P<0.001). The sensory results showed greater acceptance of the wines made after pre-drying of the grapes or from the static pomace, as compared to commercial brands. Cluster analysis and Multidimensional Scaling were successfully applied and their results demonstrated the influence of the total phenolic content and color indexes on acceptance of the appearance of the wines. The odor was associated with the alcohol content, acidity, dry extract, total and reducing sugars and the body of the wines. The flavor was associated with several physicochemical properties which influenced the overall acceptance of the samples. © 2013 Elsevier Ltd.

Extrusion of flavored corn grits: Structural characteristics, volatile compounds retention and sensory acceptability

The effects of the moisture content of the raw material, extrusion temperature and screw speed on flavor retention, sensory acceptability and structure of corn grits extrudates flavored with isovaleraldehyde, ethyl butyrate and butyric acid were investigated. Higher temperature resulted in more expanded extrudates with lower density and cutting force, while higher moisture content increased ethyl butyrate retention. The most acceptable extrudates were those obtained with low moisture content, under conditions of high extrusion temperature and high screw speed, or low screw speed and low extrusion temperature, whereas the aroma intensity closest to the ideal was observed under conditions of low extrusion temperature and low moisture content of the raw material. © 2013 Elsevier Ltd.

Texture profile and correlation between sensory and instrumental analyses on extruded snacks

Instrumental texture analysis on extruded snacks is widely applied, however there is no scientific consensus about the test and probe types that can be correlated with the sensory texture of snacks. Eleven commercial extruded snacks of different shapes were evaluated instrumentally using different probes and sensorially through descriptive analysis. The snack texture was described using the attributes of hardness, crispness, adhesiveness, fracturability and chewiness. Cylindrical snacks were described through crispness and fracturability, pelleted and shell-shaped snacks by chewiness and ring-shaped snacks by adhesiveness and hardness. Hardness and adhesiveness were correlated with a Warner-Bratzler test using a V shape probe (r = 0.718 and r = 0.763, respectively), while fracturability and chewiness were correlated with a Warner-Bratzler test using a guillotine (r = 0.776 and r = 0.662, respectively). The fairly strong good correlations enable application of these instrumental tests as an indication of the sensory texture of extruded snacks. © 2013 Elsevier Ltd. All rights reserved.

Controle de mofo-cinzento (amphobotrys ricini) da mamoneira (ricinus communis l.) por métodos químico, biológico e com óleos essenciais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)