Avaliação do desempenho ambiental da produção canavieira com colheita mecanizada: contribuição à implantação de um sistema simplificado de gestão ambiental da propriedade

The consuming of the natural resources in the agricultural sector does not represent only one external factor of the productive process, but also it implies in a bigger cost for the production, justified for this environmental degradation. In view of the necessity of evaluating the sustainment of the agricultural businesses, the use of performance indicators if makes of extreme importance. The measurement of the support through environmentalindicators is one of the most accepted forms of performing the evaluation of one given agricultural activity. In this context, the Base System for Eco-certification of Agricultural Businesses (Eco-cert Rural) developed by the Embrapa Environment at Jaguariúna/SP, has for purpose to present a method of evaluation of the agricultural businesses, not only of the point of view of the ecological performance, as well as considering the social, economic and organizational aspects. Through the analysis of the performance of the activity and the regularization of the disconformities found, it makes possible the eco-certification of the activities in the varied existing protocols, offering technologies designed to the sustainable development of the agricultural businesses. Using Eco-cert.Rural, this work evaluated the contribution of the use of mechanized harvest in sugar cane handling, front to the traditional system of manual harvest, using the fire. In the Sugar Cane Activity General Performance Index, Agrícola Rio Claro scored 2,08 of a maximum of 15. Amongst all the indicators, those wich reached performance worse had been related to the Use of Energy and the Income, by increasing fossil fuel consumptiom, and implying income concentration due to resignations of rural workers. However, the improvements on the environment quality by supressing manual harvest through fire are very significant. Beyond the great reduction in...(Complete abstract click electronic access below)

Implantação iônica por imersão em plasma e deposição de filmes finos poliméricos provenientes da mistura hexametildisilazano/argônio

Thin polymeric films deposited by plasma are very atractive for many industrial and scientific applications, in areas such as electronics, mechanics, coatings, biomaterials, among others, due to its favorable properties such as good adhesion to the substrate, high crosslinking, nanomectric thickness, homogeneity, etc. In this work, thin films were deposited by plasma immersion ion implantation and deposition technique from a hexamethyldisilazane/argon mixture at different proportions. These films were subjected to several characterizations, such as, contact angle, which presented values near to 100 degrees, surface energy, with values near to 31 mJ/m2, hardness with values between 0.7 and 2.6 GPa, thickness from 100 to 200 nm, refractive index from 1.56 to 1.64, molecular structure presenting the following functional groups in the infrared spectra region: CHx from 2960 to 2900 cm-1; Si-H around 2130 cm-1; CH3 in Si-(CH3)x around 1410 cm-1; CH3 in Si-(CH3)x in 1260 cm-1; N-H around 1180 cm-1; CH2 in Si-CH2-Si bonds around 1025 cm-1; Si-O in Si-O-Si from 1020 to 1100 cm-1; Si-N in Si-H-Si bonds around 940 cm-1; CH3 in Si-(CH3)3 in 850 cm-1; Si-C bonds in Si-(CH3)2 around 800 cm-1; and Si-H in 680 cm-1 . From these characterizations, it was possible to conclude that the concentration of argon or hexamethyldisilazane in the mixture changed the resulting polymer

Propriedades físicas de vidros Sb2O3-P2O5

This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting

UV laser photofabrication of waveguide couplers using self-patterning organic-inorganic hybrids

Planar waveguides with controlled refractive index were produced using thin films of sol-gel derived organic-inorganic hybrids, so called di-ureasils. Spectroscopic ellipsometry was used to characterize the films thickness and refractive index. UV-laser direct-writing method was used to produce Y-splitter structures with coupling ratio of 50% without the need of photoinitiators.

Composite Material Sensitive to Volatile Organic Compounds

This work evaluates fluorinated thin films and their composites for sensor development. Composites were produced using 5 µm starch particles and plasma films obtained from organic fluorinated and silicon compounds reactants. Silicon wafers and aluminum trenches were used as substrates. Film thickness, refractive index and chemical structure were also determined. Scanning electron microscopy shows conformal deposition on aluminum trenches. Films deposited on silicon were exposed to vapor of volatile organic compounds and CV curves were obtained. A qualitative model (FemLab 3.2® program) was proposed for the electronic behavior. These environmentally correct films can be used in electronic devices and preferentially reacted to polar compounds. Nonetheless, due to the difficulty in signal recovery, these films are more effective in one-way sensors, in sub-ppm range.

Elucidating the optical properties of novel heterolayered materials based on MoTe2-InN for photovoltaic applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Third-order nonlinearities and other properties of molybdenum lead-pyrophosphate glass

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lensometry by two-laser holography with photorefractive Bi12TiO20

Refractive and profilometric measurements of lenses were performed through holography with a photorefractive Bi12TiO20 crystal as the recording medium. Two properly aligned diode lasers emitting in the red region were employed as light sources. Both lasers were tuned in order to provide millimetric and sub-millimetric synthetic wavelengths. The surfaces of the test lens were covered by a 25-μm opaque plastic tape in order to allow the lens profilometry upon illuminating them with a collimated beam. The resulting holographic images appear covered by interference fringes corresponding to the wavefront geometry of the wave scattered by the lens. For refractive index measurement a diffusely scattering flat surface was positioned behind the uncovered lens which was also illuminated by a plane wave. The resulting contour interferogram describes the form of the wavefront after the beam traveled back and forth through the lens. The fringe quantitative evaluation was carried out through the four-stepping technique and the resulting phase map and the Branch-cut method was employed for phase unwrapping. The only non-optical procedure for lens characterization was the thickness measurement, made by a dial caliper. Exact ray tracing calculation was performed in order to establish a relation between the output wavefront geometry and the lens parameters like radii of curvature, thickness and refractive index. By quantitatively comparing the theoretical wavefront geometry with the experimental results relative uncertainties bellow 3% for refractive index and 1 % for focal length were obtained. © 2008 American Institute of Physics.

Influence of Mg on the structural and optical properties of LiNbO3 thin films grown by polymeric precursor method

A polymeric precursor solution was used to deposit pure and Mg doped LiNbO3 thin films on sapphire substrates by spin-coating. The effects of magnesium addition on crystallinity, morphology and optical properties of the annealed films were investigated. X-ray diffraction patterns indicate the oriented growth of the films. Phi-scan diffraction evidenced the epitaxial growth with two in-plane variants. AFM studies show that the films are very homogeneous, dense and present smooth surfaces. The refractive index and optical losses obtained by the prism coupling method were influenced by the magnesium addition.

Caracterização óptica e eletrônica de filmes semicondutores usando espectros de transmitância e refletância

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de Filmes a-C:H:Cl e a-C:H:Si:Cl produzidos por deposição à vapor químico assistido por plasma (PECVD) e deposição e implantação iônica por imersão em plasma (PIIID)

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Avian communities in woodlots in the Parque das Neblinas, Bertioga, São Paulo, Brazil

Parque das Neblinas (PN) is a 2,800 ha nature reserve contiguous with an Atlantic Forest fragment known as Parque Estadual da Serra do Mar located in the municipality of Bertioga, in the state of São Paulo, Brazil. The area originally contained Eucalyptus trees grown for paper pulp production. The aims of the study were the following: (1) to characterize the diversity of the bird community in PN; (2) to compare bird species observed in PN to species found in the Atlantic Forest; and (3) to list the percentages of species endemic to the Atlantic Forest and present in PN. Quantitative surveys used the point count method. The number of avian species recorded in PN totaled 222, of which 150 (66.4%) were associated with forest environments, 66 (29.3%) with open areas, and 10 (4.3%) with aquatic environments. The quantitative survey recorded 141 species and 2,527 contacts in 120 samples for an average of 21.05 contacts per sample. The general diversity index was H´=3.82. The study identified 15 bird species that actively participated in mixed flocks and 25 species endemic to Atlantic Forest, two of which present some kind of concern relating to conservation. Areas with Eucalyptus trees and a dense understory displayed the greatest bird species diversity, as opposed to areas with less developed or non-existent understories.

Filmes finos depositados pela técnica de implantação iônica por imersão em plasma e deposição (IIIPD), utilizando o monômero HMDSN e os gases argônio, hélio e nitrogênio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)