Nutrição mineral e escleromorfismo foliar de grupos funcionais e comunidades vegetais savânicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of UASB reactors in two stages followed by post-treatment with activated sludge in wastewater batch of wet-processed coffee

In this study it was evaluated the efficiency of the treatment of wet-processed coffee wastewater in upflow anaerobic sludge blanket (UASB) reactors in two stages, in bench scale, followed by post-treatment with activated sludge in batch. The first UASB reactor was submitted to an hydraulic retention time (HRT) of 6.2 d and organic loading rates (OLR) of 2.3 and 4.5g CODtotal (L d)-1, and the second UASB reactor to HRT of 3.1 d with OLR of 0.4 and 1.4g CODtotal (L d)-1. The average values of the affluent CODtotal increased from 13,891 to 27,926mg L-1 and the average efficiencies of removal of the CODtotal decreased from 95 to 91%, respectively, in the UASB reactors in two stages. The volumetric methane production increased from 0.274 to 0.323L CH4 (L reactor d)-1 with increment in the OLR. The average concentrations of total phenols in the affluent were of 48 and 163mg L-1, and the removal efficiencies in the UASB reactors in two stages of 92 and 90%, respectively, and increased to 97% with post-treatment. The average values of the removal efficiencies of total nitrogen and phosphorus were of 57 to 80% and 44 to 60%, respectively, in the UASB reactors in two stages and increased to 91 and 84% with the post-treatment.

Anaerobic-aerobic treatment of swine wastewater in uasb and batch reactors in series

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de parâmetros físicos e do processamento digital utilizado nos sinais oriundos do ensaio charpy instrumentado

Pós-graduação em Engenharia Civil - FEIS

Sintese e aplicação de filmes biocomponentes nanoestruturados de 'TI'/'TI''O IND.2'/'W''O IND.3' por template e 'SI'/'TI''O IND.2'/'PT' por heterojunção em conversão de energia solar e remediação ambiental

Pós-graduação em Química - IQ

Estudos teóricos e experimentais da operação conjunta de um supressor eletromagnético e de um filtro ativo de potência

Pós-graduação em Engenharia Elétrica - FEIS

Tratamento de efluente de curtume por biofiltro aerado Submerso pré-tratado com microfiltro de membrana

Pós-graduação em Engenharia Civil - FEIS

Representação e Persistência para acesso a Recursos Informacionais Digitais gerados dinamicamente em sítios oficiais do Governo Federal

The Information Access law, sanctioned in November 18, 2011, regulates the constitutional right of access to public information by Brazilian citizens. Although this law requires the provision of information of public interest, it does not define how such information should be made available. Ideally, information should be in an open format, allowing its use in an efficient and fast way. In the official sites of the federal government the way information is currently available does not allow its reuse as they are presented in dynamic pages from the selection parameters and filters. The objective aim of this paper is to present the system called MDDIR Tool, which proposes ways to persist, represent and retrieve digital information resources generated by the Federal Government official sites. Although this system had been designed for a specific purpose, it may be applied to other fields with similar characteristics. The purpose is to facilitate the access to open data, allowing such data to be consolidated and organized , generating new knowledge and information easy to be interpreted by the general population.

Ácidos orgânicos isolados ou associados em dietas de frangos de corte

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Teorias de potência conservativa e instantânea: análise comparativa

Pós-graduação em Engenharia Elétrica - FEB

Avaliação do desempenho de um reator anaeróbio compartimentado no tratamento de esgoto doméstico

Pós-graduação em Engenharia Civil - FEIS

As organizações e a ISO 26000: revisão dos conceitos, dos motivadores e das barreiras de implementação

ISO 26000, published in 2010, focuses on corporate social responsibility. This study presents a systematic review conducted in ISI Web of Knowledge (Web of Science) and Elsevier's Scopus databases to answer the following question: What are the barriers and motivators affecting the adoption of ISO 26000 by organizations? The articles were selected using filters that applied two inclusion criteria. The data were summarized in a table covering the concepts of ISO 26000, the motivators, and the barriers. The motivators were globalization or competition in international markets, congruence with management systems, reputation or image, relationship with employees and improvement of the organizational environment, improvement in the relationship with external stakeholders, competitive advantage and strategy, guide to corporate social responsibility (CSR), and reduction of business risks. The barriers were lack of alignment between CSR and organizational strategy; business (national and international); unfamiliarity with ISO 26000; lack of communication, tools and sensitivity to the subject; short-term focus; knowledge management; fear of not fulfilling the standard; and financial resources. Finally, an agenda for future studies was prepared.

Desenvolvimento e caracterização de formulação cosmética contendo nanopartículas de dióxido de titânio para proteção solar

O protetor solar é um produto extremamente importante para proteger a pele da radiação ultravioleta proveniente do sol e capaz de reduzir a incidência de câncer de pele. Os filtros solares são divididos em orgânicos e inorgânicos e, dentre os inorgânicos, se encontra o TiO2 que atua refletindo, espalhando e absorvendo as radiações UV, além de ser fotoestável e de baixo potencial de irritabilidade dérmica. Neste trabalho foram desenvolvidas formulações cosméticas em forma de gel contendo nanopartículas de dióxido de titânio capazes de agir como fotoprotetores físicos e que mantem a transparência ao serem aplicados sobre uma superfície, como a pele. Foram desenvolvidos xerogéis a base de nanopartículas de TiO2 com tamanho e superfície controlados. A partir dessas nanopartículas foi possível preparar formulações cosméticas contendo nanopartículas redispersas de xerogéis a base de TiO2. Esses sistemas foram avaliados por testes de citotoxicidade e foi obtido um resultado favorável para a continuidade da pesquisa, sugerindo o uso deste material em humanos sem causar danos. Foram feitas as caracterizações físico químicas e estruturais. A análise de FPS indicou amplo espectro da formulação, o potencial zeta mostrou que é possível evitar aglomerações das nanopartículas em pHs utilizados para formulações tópicas, a reologia demonstrou que as formulações apresentam comportamento de recuperação da consistência e organização do material inicial após seu desarranjo durante o cisalhamento. As caracterizações serviram para obter um conhecimento da estrutura química e física das amostras que contém as nanopartículas de dióxido de titânio, para que seja possível fazer uma análise crítica e melhor qualificar o protetor solar desenvolvido.

Vitrocerâmicas porosas via conformação e consolidação com amidos

The search for new methods of manufacture of glass-ceramics with controlled porosity and permeability is interesting of the industrial and commercial point of view, and a challenge of great complexity. Porous glass-ceramics produced by sintering and crystallization of glasses can find applications, for example, as filters, materials with bactericidal properties, bio-implants, as catalytic and enzymes supports, among others. An alternative and low cost method of ceramic manufacture reaching different levels of porosity, for diverse purposes, is the conformation assisted by addition of starch, known as consolidation with starch. The objective of this project is to study the process of conformation with starch for making porous glass-ceramics from a commercial glass in the system Na2O-CaO-SiO2, whose kinetics of sintering by viscous flow and surface crystallization are known. The method of conformation with starches is innovative for glass-ceramics and its development opens the way for obtaining a new class of materials. We found a possible route for the production of porous compacts of glass particles, from the powder preparation to the removal of starch. It was observed that a glass powder obtained by dry milling in a ball mill with alumina balls for 24 h, afterwards mixed with water in an eccentric ball mill for 2 h, without the addition of a deflocculant, and subsequently mixed with starch also in an eccentric ball mill for 5 min resulted in slurries stable against sedimentation

Estudo de dinâmicas populacionais aplicado a processos de tratamento biológico de efluentes

The purpose of this work is to perform studies of mathematical modeling of the relationship of interaction occurring between microrganisms participants from wastewater treatment processes aimed at understanding, through simulations, such as inter-relationships can affect the performance of such units. The methodology was the implementation in FORTRAN computer language of mathematical models of microbial interactions. The first model addresses the interaction of bacteria-forming flakes and filamentous bacteria in activated sludge systems, which seeks to strike a balance between these bacteria to improve efficiency of the process. Another model is studied the interaction between bacteria and protozoa in activated sludge systems and analyzing the efficiency of the process, observing the changes in daily load. Microbial interactions in anaerobic reactors were dealt a third model, in which there is the mutualistic interaction between acidogenic and methanogenic bacteria. In a fourth and final model was examined the relationship between the bacteria Acinetobacter sp. and Gordonia sp., which are present in activated sludge systems, showing the competitive capacity of Acinetobacter sp. can control the growth of unwanted bacteria.