Otimização multiobjetivo no controle da dengue

Pós-graduação em Biometria - IBB

Análise dos processos e instrumentos de ordenação do território: comparação entre Brasil e Portugal

Pós-graduação em Geografia - IGCE

Avaliação de oponentes en confrontos de tilápia-do-Nilo: interação entre sinais químicos e visuais

Pós-graduação em Aquicultura - FCAV

Novos derivados piperidínicos, composições farmacêuticas contendo os mesmos e processos para sua preparação

A presente invenção proporciona composições farmacêuticas compreendendo novas moléculas capazes de atuar na inibição da acetilcolinesterase, sendo úteis no tratamento de patologias associadas transmissão colinérgica, como quadros de deficiência de memória, doenças neurodegenerativas como o Mal de Alzheimer, Miastenia Gravis ou no tratamento intoxicações motivadas por agentes químicos de ação central.

Processo eletrolítico em desinfecção e controle de contaminação de substrato de fermentação de indústria alcooleira

Descrito como o presente Privilégio de Invenção, refere-se a um processo que possibilita a desinfecção do substrato de fermentação, sem adição de agentes tóxicos, de modo a garantir a compatibilidade ambiental da atividade alcooleira, para tanto, a presente invenção garante a desinfecção do substrato de fermentação eliminando as bactérias, que são nocivas ao processo e, preservando as leveduras, além do mesmo ser ambientalmente compatível, pois não deixa resíduos nem necessita a adição de substâncias químicas e, os agentes biocidas, comumente utilizados no controle de contaminações dos processos de fermentação, são dispensados nesse tratamento, sendo usados eletrodos de carbono para tal tarefa.

Controle de doenças fúngicas e de danos por frio em pós-colheita de lima ácida Tahiti

The Tahiti lime appears very susceptible to attack by post-harvest diseases, primarily by the fungi Penicillium and Phomopsis, and also because of its high sensitivity to storage at low temperatures. In order to reduce such damage, the present study aimed to verify the efficiency of heat treatment and disinfection of pathogens in the prevention of post-harvest chilling injury of this cultivar and to compare this treatment with other products using the conventional fungicides. The heat treatments were studied with hot-water temperatures ranging between 48 and 56° C. Water at room temperature was used as a control treatment. After treatment, the fruits were kept under cold temperature at 10° C and RH 90% for about 45 days. For comparison, three other treatments were carried out simultaneously, one using imazalil, one with baking soda, and a third with sodium carbonate, these three products being applied by baths in cold water. Two groups of fruit were evaluated, one treated by immersion considering pathogens coming from the field and another by inoculation with spores of the previously isolated pathogens. For the evaluation of physical and chemical parameters of fruits, determinations were made of the skin color, texture, weight loss, size, juice yield, soluble solids, total acidity and vitamin C content. The determination of the sensitivity of the fruit to cold was made by their exposure at temperatures inducing cold damage. The design was a randomized block design with nine treatments, analyzed by the Statgraphics statistical package. Heat treatments, especially at 52° C, were shown to be more promising in the control of pathogenic fungi and cold damage, surpassing the conventional fungicides. No changes were found in the intrinsic and extrinsic parameters in relation to the application of the different treatments.

Alternativas para o controle de nematoides gastrintestinais de pequenos ruminantes

Sheep and goat farming requires an efficient management program, due to losses caused by parasites in susceptible animals. Many factors may collaborate to improve infection tolerance in the herd, such as: genetics, nutrition, physiological status, and age. The problem caused by resistance to antihelmintic agents has led to the spread of alternative techniques for parasite controls. The latest strategies include selective treatment with the FAMACHA method, phytotherapy, biological control with predatory fungi, and strategies that still await scientific confirmation, such as homeopathy, the dilution of resistance with the introduction of susceptible parasites, and the combination of drugs without antihelmintic effect. The main objective of these methods is to reduce the usage of antiparasitic agents, thus slowing the development of resistance and promoting the better use of effective products and newly released products. The objective of this article is to describe techniques for controlling nematodes in small ruminants, and it is aimed at technicians interested in increasing their knowledge about the mechanisms of resistance to antihelmintic agents as well as alternatives to the use of these products.

Eficiência do silicato de potássio no controle do oídio e no desenvolvimento de abobrinha de moita

The most widely standard used for powdery mildew control on cucurbitaceas is the use of resistant cultivars and systemic fungicides, even though nutrition has been an option. The supply of silicon is benefic to many vegetable species, stimulating growth, yield, photosynthesis and regulation of transpiration; besides, its deposition in the epidermis avoids the invasion of fungus, bacteria and sucking insects. The aim of this experiment was to evaluate the influence of potassium silicate on powdery mildew control, development and yield of zucchini squash, cultivar Caserta. The experiment was conducted at Universidade Estadual Paulista, in greenhouse conditions and with a randomized design, divided in four replications, 11 plants per plot and five treatments: control (water), chemical treatment with fenarimol (2.4 g a.i. 100 L-1) and potassium silicate, in doses 1.5 L ha-1; 2.0 L ha-1 and 2.5 L ha-1. We evaluated the disease severity; gas exchange (net CO2 assimilation rates, transpiration, stomatal conductance and water use efficiency); growth (leaf area ratio, relative growth rate, absolute growth rate, net assimilation rate and specific leaf mass) and yield. The results showed that the foliar application of potassium silicate and fenarimol controlled powdery mildew and had no influence on plant growth. Therefore, the potassium silicate may be used as alternative for control of fungal pathogens and reduced application of chemical products, which provides a greater environmental sustainability. However, it is necessary to be careful with high doses because it was observed that 2.5 L h-1 was harmful to fruit production and gas exchange, despite being effective in controlling powdery mildew. According to this study it is recommended using 2.0 L ha-1 for control of powdery mildew to zucchini squash, and can replace the use of fenarimol, without affecting productivity and development of plants.

Avaliação de fungicidas, óleos essenciais e agentes biológicos no controle de Amphobotrys ricini em mamoneira (Ricinus communis L.)

The castor bean (Ricinus communis L.) is a tropical oilseed species, and the oil extracted from its seeds is one of the most versatile oils in the nature, showing various industrial uses. Even though it is a rustic species, the castor bean is subjected to several diseases such as the gray mold, caused by the fungus Amphobotrys ricini. Genetic breeding would be the best alternative for the disease control, but a long time is required to obtain resistant cultivars. Thus, the use of control strategies based on chemical, alternative or biological methods shows viable in the short term. The aim of this study was to investigate gray mold control efficiency, in castor bean crop, using chemical, alternative and biological methods. The pathogen control efficiency was evaluated both in vitro and in vivo using fungicides, essential oils and biological control agents. As regards the in vitro inhibition of the pathogen mycelial growth, the best treatments with essential oils were those based on C. martini and C. zeylanicum at all five tested concentrations. For both oils, the average diameter of colonies was 0.7 cm against 4.79 cm for the control treatment. For the fungicides, at all four tested levels, the most efficient active ingredients were methyl tiophanate, carbendazim, tebuconazole and iprodione. The ED50 of these fungicides was <1uL/L, yielding 100% mycelial growth inhibition at all concentrations. As to the inhibition of A. ricini conidium germination, the fungicides tebuconazole and chlorotanolyl were the best at all tested concentrations, and the average of germinated conidia with these fungicides was 0.0 and 0.15%, respectively, against 100% for the control treatment. In the field, treatment with the fungicide iprodione was the best for the disease control when compared to biological and alternative treatments. Under field conditions, the average disease severity for the treatment with iprodione was 15.76% against 95.81% for the inoculated control.

Padronização e melhoria de processos produtivos em empresas de panificação: estudo de múltiplos casos

An important tool for organizational change is the standardization of procedures for developing standards so that companies have greater control, thus providing a broad view of their processes and needs. This paper presents and analyzes a model of standard processes developed by the bakeries in PROPAN (Support Programme Bakery), detailing each stage of deployment to evaluate both its benefits for companies and employees and its shortcomings, to make proposals for improvements. Five bakeries were selected for this multi-case study, whose methodology consists of qualitative research using semi-structured interviews, on-site observations and document analysis. The main positive points of the model are the possibility of standardized recipes and procedures, a large decrease in wasted raw material and a significant increase in worker productivity. The main challenges are the lack of employee and owner commitment to the project, the lack of materials needed for deployment and the resistance of employees to change.

Estudo de aspectos químicos, biológicos e biossintéticos em Piper fuligineum Kunth(Piperaceae)

Pós-graduação em Química - IQ

Tall oil e seus subprodutos: alternativas como preservantes para madeira

Pós-graduação em Engenharia Mecânica - FEG

Análise da robustez e aplicações de controle com modos deslizantes em sistemas incertos com atraso no controle

Pós-graduação em Engenharia Elétrica - FEIS

Conversor para pulsos elétricos de alta tensão, de curta duração, para processos de geração de ozônio

Pós-graduação em Engenharia Elétrica - FEIS

Controle estatístico de processo aplicado ao monitoramento de perdas na colheita mecanizada de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV