Otimização de rotas tecnológicas de processamento e distribuição de resíduos municipais

Pós-graduação em Engenharia Mecânica - FEG

Características químicas do solo e produção de biomassa de alface adubada com compostos orgânicos

The objective of the present study was to evaluate changes in chemical characteristics of soil and yield response of lettuce fertilized with organic compounds from waste and/or raw materials. Treatments were arranged in a randomized block design in a 5 x 4 factorial scheme, with five types and four doses of organic compounds, with four replications, applied to plants grown in pots for 35 days under greenhouse conditions. In the soil, the evaluated variables were: organic matter content, nutrient content -P, K+, Na+, Ca2+ and Mg+2, potential acidity (H+ + Al3+), sum of bases (S value), cation exchange capacity (CEC), base saturation (V%) and pH. In plants, dry matter yield of shoot was assessed. The addition of organic compounds increased the dry matter yield of the lettuce and organic matter content in soil, favoring the increase of phosphorus and exchangeable sodium in soil, also, increase in calcium and potassium were observed, with use of some compounds. Compounds 3 (domestic, urban and industrial residues) and 4 (Commercial Composto - Greenworld), mainly, improve the chemical characteristics of soil and reduce potential acidity.

Cleaner Production initiatives and challenges for a sustainable world: an introduction to this special volume

This special volume of the Journal of Cleaner Production is comprised of articles presented at the 3rd International Workshop Advances in Cleaner Production held in Sao Paulo, Brazil, in 2011. The content underscores the recognition of the pressing and inescapable need for making changes from unsustainable to sustainable production and consumption patterns. The 48 articles from 15 countries provide different, but complimentary approaches to help industrial and societal sectors in advancing on their paths towards sustainability. Initiatives and challenges are included, which systematically address problems affecting raw material changes, technological modifications, product and policy changes. The findings range from proposals for alternative uses of wastes, substitution of raw materials for environmentally friendlier substances, optimization of industrial processes by source reductions of wastes and emissions and documented economic and environmental advantages of a wide array of initiatives. The roles of operational and managerial practices are also stressed, highlighting the role of diverse stakeholders as promoters of implementation and internalization of innovative cleaner technologies within companies. Systemic assessment tools are employed and experimented with in order to more effectively evaluate the environmental performance of systems on the biosphere scale. The methodological procedures and proposals presented can help in the design and management of production systems, for governmental and corporate policy development, for implementing and monitoring CP Programs, prevention and mitigation strategies, and evaluation of the outcomes of CP initiatives in the production and service sectors. (C) 2013 Elsevier Ltd. All rights reserved.

A colonização agroindustrial do cerrado em Mato Grosso (1970-2000)

Pós-graduação em História - FCLAS

Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Processing and characterization of ablative composites used in rocket motors

The main objective of this research work was to obtain two formulations of ablative composites. These composites are also known as ablative structural composites, for applications in atmospherically severe conditions according to the high-temperature, hot gaseous products flow generated from the burning of solid propellants. The formulations were manufactured with phenolic resin reinforced with chopped carbon fiber. The composites were obtained by the hot compression molding technique. Another purpose of this work was to conduct the physical and chemical characterization of the matrix, the reinforcements and the composites. After the characterization, a nozzle divergent of each formulation was manufactured and its performance was evaluated through the rocket motor static firing test. According to the results found in this work, it was possible to observe through the characterization of the raw materials that phenolic resins showed peculiarities in their properties that differentiate one from the other, but did not exhibit significant differences in performance as a composite material for use in ablation conditions. Both composites showed good performance for use in thermal protection, confirmed by firing static tests (rocket motor). Composites made with phenolic resin and chopped carbon fiber showed that it is a material with excellent resistance to ablation process. This composite can be used to produce nozzle parts with complex geometry or shapes and low manufacturing cost.

NUTRITIONAL STATUS AND LEVELS OF HEAVY METALS IN LETTUCE PLANTS FERTILIZED WITH ORGANIC COMPOUNDS

The use of organic compounds has been a good option to reduce spending on fertilizers, and gain increased productivity in the cultivation of lettuce. However, given the wide variety of raw materials used in the preparation of organic compounds, studies are needed to evaluate its effects on the release of essential nutrients to plants and on the release of contaminants such as heavy metals. The aim of this study was to evaluate the mineral nutrition and heavy metal contamination of lettuce in soils treated with doses and types of compost. The experiment was conducted in a greenhouse in randomized blocks in factorial scheme 5x4, with five types of organic compounds and four nitrogen levels (0, 35, 70 and 140 kg ha(-1) of N), with four replications. In general, the doses of the compounds were not enough to provide the necessary quantity of nutrients to the lettuce, with the exception of nitrogen. There was no increase in levels of heavy metals in the soil above that allowed by Brazilian legislation. Furthermore, compounds based on manure plus grass, and commercial compound caused increases in Zn concentration in plants at levels above the recommended for consumed.

Estudo das características térmicas e mecânicas de formulações de adesivos PSA HOT MELT contendo variações de borrachas SBC e resinas taquificantes

The properties of the hot melt adhesive pressure sensitive (HMPSA) using an elastomer as a base polymer a copolymer of styrene and butadiene (SBS) and variation of tackifiers resins such as hydrocarbon resins and hydrogenated hydrocarbon were investigated. The formulations were prepared by mixing process within shear. The adhesives prepared were evaluated in test Brookfield viscosity and softening point Ring and Ball to compare the formulations and the influence of variations in raw materials. Infrared analyzes were performed to detect the reactions between the inputs and investigate the chemical interactions of the same properties of the adhesive. In thermal analysis, the assay was performed thermogravimetry (TG) and diferencial exploratory calorimetry (DSC). Were investigated the parameters of the tensile test on each of the formulations. Finally, were analysed comparatively the basic formulations of adhesives with their respective raw materials

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Avaliação de qualidade de amidos de mandioca modificados utilizados na fabricação de pão de queijo

The food industry looks for new ways and strategies to standardize the marketing products in the customer market. The modification of the cornflour that are produced in the manufacturing of the cheese bread has been one of the these ways, since some raw materials that are used to make the cornflour present different features in each supplyed allotment. The present research had as a main purpose to analyse such features looking forward to improving the quality of the final product. Thus, some tests were done to verify the pH, humidity and acidity; it was checked the percentage of carbonyl and carboxylic groups and the power of expansion to five different allotments and to farina, for example: pre-gel, natural, expandex farina as the combination of the three cited kinds. After diversifying the allotments, different results were acquired, even to an unique kind of farina and it was not possible to correlate the results of acidity, the percentage of carbonyl and carboxylic groups and the power of expansion. The pH and humidity are proper for each kind of farina. This way, the raw materials that are used for each cheese bread manufacturing must be analysed in each allotment

O valor da elaboração de relatórios de sustentabilidade para as empresas de mineração

Sustainability has been moving up on the business agenda in recent decades, and many methods to assess corporate sustainability have already been created. One of the most used and reliable methods is the Sustainability Reporting Guidelines of the Global Reporting Initiative (GRI). Given the importance of sustainability for society and organizations, this study examined sustainability reports published by mining companies – Alcoa, Vale and Samarco – since 2006. The objective was to verify the indicators that contribute most to the minimization of environmental impacts and the improvement of environmental performance. The methodology consisted of collecting and analyzing data from the GRI sustainability reports. It was discovered that the sustainability reports helped the companies to identify improvement opportunities and it is essential companies provide in their reports an economic, environmental and social context of their activities. Furthermore, it was found out that the indicators related to atmospheric emissions, solid waste generation, environmental protection expenditure, and the consumption of raw materials, energy and water are the ones more attached to the production process, which means they are the main contributors for the environmental performance improvement

Ecologia de cultivos: caracterização dos aspectos ecológicos dos diferentes cultivos no município de Cristais Paulistas-SP

Planning is an essential instrument for the agricultural occupation of the lands, because it supports the activities of food production and raw materials. It must be driven by techniques that provide the sustainability of these activities, so that also ensures the environmental balance of agroecosystems. Lands misuse can be considered as one of the causes of frustration of agricultural activities. Thus, the occurrence of discrepancies between the effective use (real use) of the land and its agricultural aptitude can compete, in many cases, to the decrease of productivity, as well as for soil degradation. In this way, this research intends to study the relationship between the temporary cultivations, halfperennial cultures, perennial and its developmental environment, determining the edaphoclimatic characteristics of landscapes. From then on, a letter shall be subject to the use and occupation of the soil for agriculture in the municipality of Cristais Paulista-SP, aiming to describe the spatial organization of land use and vegetation cover, and emphasizing management and conservative practices. For that, climatic factors were characterized, fundamentally humidity, temperature and luminosity; edaphics, including parental material, chemical and physical properties, fertility, soil temperature and climatic zoning; biotic, referring to the suitability of different cultures or to be implanted; physical, such as geomorphology, slope, geology, hypsometry and hydrology; socioeconomic, in particular production and marketing seasons; and the way they all, together, affect the adaptation, distribution and production of crops. Using this information, the zoning of the area of study was done based on the 21 nominated groups obtained, in addition to recommendations and suggestions for handling each type of cultivation... (Complete abstract click electronic access below)

Recuperação de resíduos plásticos provenientes dos processos de injeção

The competitiveness among global markets, the constant need for reducing manufacturing costs and also the growing environmental commitments are fueling the development of techniques for recovery residual parts generated by industrial processes. Among the various areas of a company, we highlight those that involve the processing of raw materials derived from oil, such as polymers (resins), which may take centuries to decompose in the environment and also present as a economic and environmentally strategic point. Thus, this study would examine the recovery of waste polypropylene, from the injection process of a major multinational in the field of home appliances through the recycling by a process comprising the milling, extrusion and chipping of waste material. Easy to deploy, this proposal aims to reduce levels negligible disposal (scrap) of these residues as well as the reintegration of the production process into pieces no visual and no structural importance, aimed at cutting costs and reducing environmental impacts caused. After the survey data in kilograms of waste material generated in a given period of time, and the study of changes in material properties, it would enable the reuse steadily in the injection process

Uma revisão sobre a resina uréia-formadeído (RUF) empregada na produção de painéis de madeira reconstituída

According to ABIPA (2009), Brazil is currently among the major producers of reconstituted wood panels, with one of the main factors for this condition, its climate and its large land area, which allows the cultivation of forests, which provide raw materials for these industries. To establish that market as power, Brazil has invested about R$ 1.3 billion in the last 10 years, yet designed an investment of 0.8 billion dollars over the next three years (BNDES, 2008). With the new investments in this segment, we expect a growth of about 66% in the resin consumption of urea-formaldehyde (GPC, 2009) which should also result in major investments by the companies producing this polymer. Currently employees are mainly three types of resins in the production industry panels, as follows: Urea-Formaldehyde Resin (R-UF), melamine-formaldehyde resin (R-MF) and Phenol-Formaldehyde Resin (R-FF). Especially the cost factor, the urea-formaldehyde resin is the most used by companies producing reconstituted wood panels. The UF-R is a polymer obtained by condensation of urea and formaldehyde reactors (usually batch type), characterized by being a thermosetting polymer which makes it very efficient for bonding wood composites. The urea-formaldehyde polymer, to present a quite complex, it becomes very difficult to predict the exact chain resulting in the process of condensation of urea with formaldehyde, so that a greater knowledge of its characteristics and methods for their characterization can result in greater control in industrial processes and subsequent decrease cost and improve the quality of reconstituted wood panels produced in Brazil

Identificação e implementação de melhorias nas operações de transporte interno de matéria-prima de um aindústria de bens de consumo

The world is an environment in constant process of globalization, where physical boundaries are no longer limits. The competitiveness has also evolved, forcing companies to adopt efficient practices in order to increase productivity gains, reduce losses and improve quality. Nowadays, the supply chain management and its element, including the internal logistics, is regarded as a key element for gaining competitiveness. Thus, this study focused on identifying and implementing improvements in the internal raw materials transport operations of a consumer goods company, based on concepts and tools of the lean thinking. The results showed considerable gains in productivity with consequent cost reduction, proving the efficiency of the methodology lean even in support areas of an organization.