168 resultados para Agricultural production indicators
Resumo:
The multivariate analysis grouping was used to characterize the productive and climate profile of southeastern of Mato Grosso state. This technique allowed the junction of similar micro regions from characteristics of productivity and climatic, without the need for the assumption of the number or structure of the groups. Cluster analysis allowed the design of a mosaic of spatial heterogeneity regions. It established different profiles in the composition of groups, joining the more traditional in the culture of a species, or more productive, or those for the development of a particular culture. The results obtained by estimation of the climatic parameters and the multivariate procedures enabled the provision of systematic information that will allow farmers to better decision-making on the competitiveness and maintaining the flow of investment in agricultural sector southeastern Mato Grosso.
Resumo:
The landuse is usually an human phenomenon that occurs over the years, due to population increase. The territorial knowledge is needed, and is the first step for environmental planning to implement conservation practices on agricultural production system. This study aimed to develop thematic maps as: hydrography, soil, slope, land use, and subbasins to obtain the main geomorphic morphometric data (physical) of the Córrego Rico Watershed. The techniques of remote sensing and geographic information system were used to elaborate the maps and for calculating the geomorphological data, as area, altitude and length of the drainage net, which were submitted to multivariate statistics. The Córrego Rico Watershed has an area of 563 km2 . The predominant slopes were 3-8%, with 55.3% of the total area; and the main use was sugar cane. The soils that predominate in the area are Oxisols towards the Mogi-Guaçú river mouth and Ultisols at the upstream of the basin.
Resumo:
Biodiesel is a reality in Brazil, due to the National Program of Biodiesel Production and Use (PNPB), which became mandatory in 2008 in adding 2% biodiesel in all diesel sold in a blend known as B2. The agribusiness sector responded to the federal program, facing many difficulties in biodiesel production, which highlights the supply of raw material. Problems related to biodiesel production were mainly the shortage of vegetable oil, because of demand from domestic and foreign markets, and rising prices of raw materials available for production, making this biofuel production economically feasible, even in Brazil, where agricultural production costs are among the most competitive in the world. The crambe is a specie that has aroused the interest of Brazilian producers due to oil content, hardiness, and mechanized cultivation, mainly for being a winter crop, it becomes one more option for farmers in this period. In addition, you can compose systems of crop rotation as well as being used as ground cover in winter. The aim of this study was to evaluate the potential for productive and cost of production of crambe, conducted in no-tillage system, to compare these parameters with other oil crops such as sunflower, canola and soybean. The trial was conducted in the agricultural year 2008 at the Experimental Farm Lageado belonging to the Faculty of Agronomic Sciences - UNESP, located in Botucatu - SP. The estimated yield was 1.507,05 kg ha-1, resulting in a production of 561,94 liters of oil per hectare. The cost of installation and conduct of crambe per hectare was R$ 875,87, resulting in a cost of R$ 1,56 per liter of oil, the lowest cost among the oilseed crops analyzed.
Resumo:
The application of pesticides is one of the most important steps in the agricultural production process. The spray volume can directly affect application success, and this parameter is directly dependent on the displacement speed of the sprayer. In conventional systems, the operator has to maintain a constant speed to ensure uniform application along the tracks. In order to improve over application quality and preserve levels of precision for applied doses; the use of electronic flow control systems allows for automatic adjustment of volume applied over the area when there is a change in velocity during application. The objective of this research was to study the response times of a flow controller with DGPS for aerial application subjected to variations of velocity in laboratory simulated flight conditions. For this purpose, a bench test has been developed including software for simulating DGPS signals, which was used to simulate different flight speeds and conditions. The results showed the average response time from the flow controller to a change in velocity to be between 6 and 20 seconds. Variations in total flow and the controller setting had a significant influence on response time with situations where there was interaction between the factors being evaluated. There was a tendency for better response times using a constant setting for the control algorithm other than that specified by the manufacturer. The flow controller presented an average error rates below 2% in all evaluated operating conditions, providing satisfactory accuracy in determining the output of product in different test situations.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
After realizing two interviews, with distinct managers/businessmen working in the cotton industry, the objective is to put in evidence the political, economical and social factors that contributed to the formation and configuration of the Mato Grosso state, after the trade liberalization that occurred in the early 90's, it's effects and consequences in the eyes of the interviewed. The study of public policies is primordial to the discovery of the configuration of determined place, evaluating advances and possible errors in the social, economical and environmental areas. Through the analysis of the interviews it has been found that the urban centers have been developing with a direct link to the industrial activities related to agriculture and that the labor work force have also been attracted because of these changes, and as a consequence this labor force is now becoming more specialized to be able to accompany the jobs requirements in the industry. Analyzing the interviews, it is possible to highlight some information about the development of Mato Grosso, among those the following factors and public policies. The creation and expansion of the cities in the state are possible through public and private investment in infrastructure the socioeconomic development of the state is linked with the advances made in the private sector that grows because of advances made in crops technology in contrast to the occupation of the cerrado, in relation to the cotton crops. The problems that Mato Grosso is facing are mainly linked to the region infrastructure, that can count on investment plans to transportation and production flow that dates before the globalization era. The pattern that is seen today with top of the line agricultural production, big monoculture with high productivity and the arrival of multinational giants, was implanted because of two important events: the trade liberalization in the 1990's and the cambial depreciation in the 1999's...
Resumo:
This monograph is part of the works developed in the Scientific Initiation aimed at updating and improving the Atlas of Brazilian Agrarian Question - AQAB. For pioneering and scope of work-matrix, the objective this first part focused on the development of issues related to agricultural production, being drawn maps with data from the Municipal Agricultural Production-PAM 2012; Municipal Livestock Research-PPM 2012; Production of Vegetable Extraction and Forestry-2012, all analyzed from bibliographic review and joint interpretation of tables and graphs. Pari passu, this topic allowed the development of studies on peasant farms, because they are correlated subjects. Peasant farmers produce large portion of the food served to the population. Its features are its mode of production in the field, the way in which the activities take place within the family, the struggle for their social reproduction and by the earth, the practice of polyculture, preservation of the environment and the genetic diversity of species. The surplus production is sold on the market to meet other family demands unmet by production on their properties. We understand that both terms; Peasant or Farmer, refer to the same subject, but with different interpretations of their way of social reproduction and market relations...
Resumo:
Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)