Cinética de degradação do sistema resina epóxi/fibra de carbono

With the increasing demand for electricity, the retraining of transmission lines is necessary despite environmental restrictions and crossings in densely populated areas to build new transmission and distribution lines. Solution is reuse the existent cables, replacing the old conductor cables for new cables with higher capacity power transmission, and control of sag installed. The increasing demand for electrical power has increased the electric current on the wires and therefore, it must bear out temperatures of 150°C or more, without the risk of the increasing sag beyond the established limits. In the case of long crossings or densely populated areas, sag is due to high weight of the cable on clearance. The cable type determines the weight, sag, height and the towers dimensions, which are the items that most influence the investment of the transmission line. Hence, to reduce both cost of investment and maintenance of the line, the use of a lighter cable can reduce both number and the height of the towers, with financial return on short and long term. Therefore, in order to increase the amount of transmitted energy and reduce the number of built towers and sag, is recommended in the current work substitute the current core material (steel or aluminium) for alternatives alloys or new materials, in this case a composite, which has low density, elevated stiffness (elasticity module), thus apply the pultruded carbon fiber with epoxy resin as matrix systems and perform the study of the kinetics of degradation by thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), according to their respective standards

O Sistema de Gestão Ambiental e sua contribuição socioambiental para a biblioteca central da UNESP, Campus Rio Claro/SP

The minimization and mitigation of environmental impacts caused by the activities of organizations is increasingly becoming a key concern due to factors such as market demand, including suppliers and consumer markets, quality standards and even marketing strategies. The implementation of an EMS - Environmental Management System - allows the organization to achieve the level of environmental performance for its determined and promotes continuous improvement over time. This system consists of a schedule of activities, so as to eliminate or minimize impacts to the environment through preventive actions. It also provides a structured approach to set and achieve goals and objectives, and to establish procedures, work instructions and control, ensuring that the implementation of the policy can become reality. The objective of this work consists in planning a system using environmental management based on the ISO 14001 - standard internationally more widespread and accepted in the requirements to establish and operate an EMS - the Central Library, UNESP, Rio Claro / SP to stimulate the quest for continuous improvement and sustainability in the educational institution. For making the diagnosis of this planning was used the PDCA methodology, suggested by the standard, as well as all requirements for compliance. The results show that the benefits that the organization will receive involve reducing expenses and cost of energy and water, and improve the organization's reputation before the whole university and other educational institutions, reaching about three thousand people on university

Aumento da precisão do controle de estoque: pesquisa ação em indústria de bens de consumo

This work is an action research conducted in an industry of consumer goods, presenting a new model of inventory management in the company's processors. This replacement of the inventory management of the company stemmed from the need to reduce the large number of deviations in the product write off in stock, thereby generating a low accuracy and reliability of data on inventories of processors shown by the company's ERP system. Spending on inventory adjustments could thus be reduced with the implementation of the new model, thus generating a cost savings for the company and thus increasing their competitive potential in the market. In the old system adopted by the company, write off raw material inventory was done automatically by the system for customized transactions by the company. However, since the implementation of ERP in the company, the automatic write off based on historical consumption of each product were made in many cases at random, generating a lot of mistakes. The new management system has replaced the automatic system by manual at the time of the return of the processed product in the company, thus creating a control which lots and quantities were consumed in the processing and making the stock shown by the ERP reliable and accurate

Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution

A prática de treinamento dos corpos dentro da empresa: um estudo sobre uma ferramenta de controle da qualidade

Befor the vast economical growth and wild scientific and technological development, the companies are demanding, more and more qualification and acting of the services rendered by their employees. Like this, tasks are restricted the they be done with excellence, because the companies are always controlling the worker's development. They are several the tools used by the companies, as acting indexes to control the course of the worker's activities or certain section, integrations for new employees with the objective to present the line of work of the company so that the new employee is framed in these patterns, trainings offered for the employees to carry out their services with quality and compromising, evaluations of year end in order to test the worker's knowledge and to demand better results, finally, the companies hope the employee integrates normativamente into the reality of the company, in way to contribute for the atingimento of the organizational strategies, always collecting for this to obtain the best results and contribute to the growth of the company. This way, that research will present a tool of control of the total quality applied in a company in Rio Clearing's city and that it is managed by an educador. They will be verified the objectives that the company has in relationship a this control, the worker's subjectivity as participant subject of the tool of control of the System of Administration of the Quality and the worker's different glances before these aspects throught an interview.

Controle de velocidade e tração de rodas independentes para veículos elétricos

This work presents a proposal to replace thetraditional system of traction electric car that usesone electric motor and a mechanical differential, by two electric motors of lower power, controlled byelectronic control low cost. The proposed control isopen loop and uses the technique of Pulse WidthModulation (PWM), discrete and synchronizedaiming to reduce the generation of harmonics. The implementation of two smaller motor one on each wheel-drive distributes the weight of the vehicle, improving the heat exchange of the windings,beyond enable the power components supporting a current of 50% predicted for only one motor . The solution adopted for being open-loop, has a similar behavior to the mechanical differential, where theeffort imposed by the trajectory makes the velocity distribution between the wheels be appropriate tovehicle trajectory

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making

Localização de descargas parciais em transformadores de potência imersos em óleo mineral por meio de cápsulas piezelétricas de baixo custo e sistemas inteligentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo sobre o funcionamento de sistema de controle de tração em veículos automotores

This study explores the subject of traction control systems through bibliografy review on the spot of Mechanical Engineering. This paper has the objetivo of high light the main components and tecnology involved since MaxTrac system in 1971. It describes systems controled by throttle valve and breaks. Additionally, it i also presented basic knowlodged regarding electronic control unit and wheel sensors

Controle fuzzy de um motor dc utilizando sistema de aquisição de dados e o matlab

The present work develops a fuzzy inference system to control the rotation speed of a DC motor available in Degem Kit. Therefore, it should use the fuzzy toolbox of Matlab in conjunction with the data acquisition board NI - USB - 6009, a National Instrument’s board. An introduction to fuzzy logic, the mathematical model of a DC motor and the operation of data acquisition board is presented first. Followed by the controller fuzzy model implemented using Simulink which is described in detail. Finally, the prototype is shown and the simulator results are presented

Sistema de gerenciamento de energia para controle de carga/descarga entre baterias de lítio e ultracapacitores, envolvendo sistema de tração elétrica com frenagem regenerativa

Pós-graduação em Engenharia Elétrica - FEIS

Gerenciamento na construção civil - planejamento e controle: estudo de caso no planejamento físico de um empreendimento imobiliário

Given the high competitiveness in the construction industry, businesses became necessary in a management which reduce costs and delivery times, and is fundamental to running a compatible planning with the magnitude of each work order is the same make feasible the executor. When it comes to planning, one is including both the physical planning of the work, time and duration of the events, as well as the preparation of the cost thereof. There are numerous ways to run the management of works, then it is necessary, in most cases, the planning experience, in previous works, the engineer in charge, because with it he should know what strategy to take the work skirt as planned and designed. For a complete and efficient management, an initial study hard to prepare the physical and financial planning it is necessary, in order to make it real and consistent throughout the execution of the work. It is necessary also a hard monitoring of both the physical and the financial schedule in order to what was initially planned to be completed as close as possible. This paper shows a case study which uses some ways to the management be held with the course of planning, medium and short term, as well as the preparation of the initial budget of the work. Will also be presented as is performed physical planning of a real estate work

Efeitos de pontos de contato corporal e orientação segmentar na sensibilidade háptica durante o uso do sistema âncora em tarefas de controle postural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Despacho ótimo de potências ativa e reativa de sistema elétricos multi-áreas considerando restrições físicas, econômicas e ambientais =: Envronmentally constrained active-reactive optimal power flow-a compromising strategy for economic-emission dispatch and a multi-area paradigm

Pós-graduação em Engenharia Elétrica - FEIS

O controle da exposição em câmeras digitais e o sistema de zonas

Neste trabalho será comprovado que esta técnica utilizada na fotografia impressa, pode ser utilizada na prática na filmagem. Se utilizando apenas de termos técnicos utilizados em Direção de Fotografia, no seu nível avançado, aqui serão explicadas as relações matemáticas que irão clarear o funcionamento, relacionados a exposição, das ferramentas que uma câmera possui, como íris, o shutter, o ISO e o Filtro ND exemplificando suas relações com a medida de luz denominada Stop. Posteriormente, serão apresentadas ferramentas que auxiliam a monitoração da captação da imagem, como Waveform, cartão cinza 18% e Fotômetro. Todas estas informações serão utilizadas para a construção do conhecimento do Sistema de Zonas, criado por Ansel Adams, que será comprovado por exemplos reais na última parte do terceiro capítulo