Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

Mume clonal rootstocks for 'Aurora-1' peach in São Paulo State, Brazil

In spite of significant results achieved with scion genetic improvement in stone fruits, the peach culture in Brazil still needs studies and new technologies regarding the use of rootstocks. A wide research project has being developed at the Faculdade de Ciências Agrárias e Veterinárias (FCAV/UNESP), Jaboticabal, Brazil, dealing with the use of mume clones (Prunus mume) as rootstocks for peach trees, which has produced promising results. In this research, two mume genotypes propagated by herbaceous cuttings were tested as rootstocks for peach cultivar Aurora-1. Three different tree spacing were used: 6 x 2 m, 6 x 3 m and 6 x 4 m. The experiment was carried out at Vista Alegre do Alto (21°10'14 S, 48°37'45 W, 700 m of altitude), São Paulo State, Brazil. Growing field conditions included Hapludalfs soil with medium sandy texture and using micro sprinkler irrigation. The region has an average chilling accumulation 17.9 hours per year. The evaluations were taken in 2005 and 2006 (2nd and 3rd year after planting, respectively). The trunk diameter was evaluated every three months, from the 24th to the 41st month after planting, totalizing seven evaluations. Plants on 'Rigitano' had higher trunk diameter on the 33rd, 39th and 41st month after planting (May/06, November/06 and February/07, respectively). No significant differences were observed in the other evaluations. The diameter at 5 cm above to the graft point was larger than below, but no incompatibility symptoms were observed between rootstocks and scion. Spacing tested did not influence trunk diameter, phenology and flower bud production in 'Aurora-1' scion. In conclusion, 'Rigitano' and 'Clone 15' are recommended for high density plantings of peach 'Aurora-1' in Brazil, and the 6 x 2 m spacing can be recommended, with productivity advantages for peach under low air relative humidity and mild winter conditions. © ISHS 2012.

Fertilizing lychee plants with phosphorus at time of planting in Brazil

The objective of this research was to study the effects of P fertilizers applied at time of planting on lychees' nutritional status and on plant growth. The treatments consisted of five doses of P: zero, 50, 100, 200, and 300 g of P2O5 per plant, furnished by triple superphosphate. Plant diameter was evaluated during two years and the plants' nutritional status on the second year. The second year foliar levels of macro and micronutrients (with the exception of Zn) were increased by the P fertilizer. The orchard's initial development, especially during the second year, was also influenced by the fertilizer. The P doses of 164 and 158 g of P2O5 per plant resulted in the largest plant diameter after the first and the second year, respectively. These doses were found to be associated with a foliar P level of <1.4 g kg-1. © 2012 Renato de Mello Prado et al.

Substitution of corn and soybean oil by cassava meal and African palm tree oil in diets of laying hens

Fourty-two White Leghorns laying hens, from the commercial Cuban hybrid L-33, were used for eight weeks during the laying peak (36 to 43 weeks of age), to assess the substitution of corn by cassava root meal (Manihot esculenta Crantz) and the crude soybean oil by crude oil of African palm tree (Elaeis guineensis J.) in the diets of laying hens. Analysis of variance was conducted, according to simple classification design, with three treatments and 14 repetitions (a cage with a hen). The treatments consisted of three diets (1- corn meal + soybean oil; 2- 25 % cassava meal + African palm tree oil; 3- 53 % cassava meal + African palm tree oil), with 15.71 % CP; 3.83 % Ca and 0.36 % P available. The viability was of 100 % in all treatments. No differences were found for laying (92.21, 92.09 and 91.59 %), which surpassed the potential of this hybrid during the laying peak (90 %), conversion (118g feedstuff/egg in the three treatments), egg mass produced (3066, 3114 and 3071 g/bird) and mass conversion (1.99, 1.95 y 1.98 feed consumed/egg mass). The pigmentation of the egg yolk was reduced as the level of cassava meal increased in the diets (6, 4 and 3 at Roche's scale), as well as the cost of the feed consumed in 56 d per hen (2.56, 2.15 and 1.83 USD/bird). The possibility of substituting, totally, corn meal by that of cassava and soybean oil by that of the African palm tree in the diets of laying hens during the laying peak was determined, with positive economic effect and without damaging the productive performance of birds.

Population Fluctuation and Damage Caused by Phytophagous Mites on Three Rubber Tree Clones

Our aim was to investigate the population fluctuation and the damage caused by the phytophagous mites Calacarus heveae Feres, Tenuipalpus heveae Baker, and Eutetranychus banksi (McGregor) on clones FX 2784, FX 3864, and MDF 180 in rubber tree crops from southeastern Bahia, Brazil. Moreover, we tested for the influence of climatic variables on occurrence patterns of these species throughout weekly samples performed from October to April. The infestation peaks was between mid-January and late February. The clones FX 2784 and FX 3864 had the highest infestations and more severe damage possibly caused by C. heveae, which was the most frequent and abundant species in all clones. We found that sunlight duration and rainfall were the most important factors for C. heveae while T. heveae was affected by rainfall and temperature. Eutetranychus banksi was only affected by sunlight duration. However, the best models had low goodness of fit. We concluded that the clones FX 2784 and FX 3864 had a higher susceptibility to mite attack, and the association between climatic variables and favorable physiological conditions were determinant for the population increase of the species from January to April. © 2012 Sociedade Entomológica do Brasil.

Sequential Sampling Plan for Tenuipalpus heveae Baker (Acari: Tenuipalpidae) on Rubber Tree

The objective of the present study was to develop a sequential sampling plan for the decision-making process to control Tenuipalpus heveae Baker (Acari: Tenuipalpidae), an important pest of the rubber tree crop. The experimental area was represented by 1,000 plants of the RRIM 600 clone divided in 100 plots with 10 plants each. Leaves were collected and the number of mites determined under laboratory conditions. The sequential sampling plan was developed in accordance with the Sequential Test Likelihood Ratio. The value 0.10 was pre-established for α and β representing type I and type II errors, respectively. The level of control adopted was six mites per 12 cm2. The operating characteristic curve and the curve of maximum expected sample were determined. Two lines were generated: the upper one, when the condition for chemical control is recommended (S1 = 23.3080 + 2.1972); and the lower, when chemical control is not recommended (S0 = -23.3080 + 2.1972). Sample size for the decision-making process to control T. heveae requires 6 to 18 plants. © 2013 Sociedade Entomológica do Brasil.

Mangrove habitat partitioning by Ucides cordatus (Ucididae): Effects of the degree of tidal flooding and tree-species composition during its life cycle

Environmental factors strongly affect mangrove crabs, and some factors modulate population structure and habitat partitioning during the crabs' life cycle. However, the effect of these environmental factors on habitat selection by mangrove crabs is still unknown. We evaluated habitat selection by the mangrove crab Ucides cordatus in mangrove forests with different degrees of predominance of Rhizophora mangle, Laguncularia racemosa or Avicennia schaueriana, two tidal flooding levels (less- and more-flooded), and two biological periods (breeding and non-breeding seasons). Sampling was conducted in four mangrove forests with different influences of these biotic and abiotic parameters. We used the data for sex ratio to explain environmental partitioning by this species. Females predominated in R. mangle mangroves, independently of the biological period (breeding or non-breeding seasons), and males predominated only in the less-flooded L. racemosa mangroves. The flooding level affected the sex ratio of U. cordatus, with a predominance of males in less-flooded mangroves, independently of the biological period; and a gender balance in the more-flooded mangroves only during the breeding season. Outside the breeding season, the largest specimens were recorded in the R. mangle mangroves, but in the breeding season, the largest crabs were recorded in the L. racemosa mangroves with a higher level of flooding. These results suggest that tree-species composition and tidal flooding level can have a significant effect on the habitat partitioning of sexes and sizes of the mangrove crab U. cordatus both during and outside the breeding season. © 2012 Springer-Verlag and AWI.

Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Variação genética em progênies de jacaranda cuspidifolia mart. Utilizando o delineamento sistemático tipo leque

Knowledge of genetic variation in native tree species has helped direct strategies of genetic ex situ conservation, based on provenances and progenies tests. These tests use fixed spacing, not allowing evaluating the behavior of different progenies under this management variable. One way to evaluate simultaneously the genetic variation and different spacing in a small planting area is to use a systematic design. The aim of this study was to estimate the genetic variation and to evaluate its performance in Jacaranda cuspidifolia under different spacing. We used a progeny test in a systematic fan design, arranged in a system of 30 concentric rays, with one progeny per ray, randomly, at angles of 12°. The plants were arranged in rays in geometric progression of ratio 1.21, corresponding to nine for plant spacing: 1,95 m2; 2,86 m2; 4,18 m2; 6,12 m2; 8,96 m2; 13,12 m2; 19,21 m2; 28,13 m2; e 41,19 m 2 installed in Selvíria/MS. The traits height, height diameter of 30 cm to soil (DA3) and survival were evaluated at 12 and 24 months of age. Estimates of genetic parameters and spacing were evaluated using the procedure REML/BLUP (restricted maximum likelihood / best linear unbiased prediction). The progenies showed genetic variation, showing that the sample strategy to ex situ conservation was efficient. The species showed good adaptability inthe field and the best performance in treating five, equivalent to a 3 × 3 m spacing, with 8,96 m2;/plant for all traits. The fan systematic design permitted to evaluate in a small area the silvicultural behavior of J. Cuspidifolia plants in spacing varying from 2 to 42 m2/plant (5.000 to 238 trees/ha); which could hardly be evaluat by the traditional designs.

Source-driven remobilizations of nutrients within stem wood in Eucalyptus grandis plantations

Nutrient remobilizations in tree ligneous components have been little studied in tropical forests. A complete randomized block design was installed in Brazilian eucalypt plantations to quantify the remobilizations of phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), and sodium (Na) within stem wood. Three treatments were studied: control with neither K nor Na addition (C), 3 kmol ha-1 K applied (+K), and 3 kmol ha-1 Na applied (+Na). Biomass and nutrient contents were measured in the stem wood of eight trees destructively sampled at 1, 2, 3 and 4 years after planting in each treatment and annual rings were localized on discs of wood sampled every 3 m in half of the trees. Chemical analyses and wood density measurements were performed individually for each ring per level and per tree sampled. Nutrient remobilizations in annual rings were calculated through mass balance between two successive ages. Our results show that nutrient remobilizations within stem wood were mainly source-driven. Potassium and Na additions largely increased their concentration in the outer rings as well as the amounts remobilized in the first 2 years after the wood formation. The amount of Na remobilized in annual rings was 15 % higher in +Na than in +K the fourth year after planting despite a 34 % higher production of stem wood in +K leading to a much higher nutrient sink. A partial substitution of K by Na in the remobilizations within stem wood might contribute to enhancing Eucalyptus grandis growth in K-depleted soils. © 2013 Springer-Verlag Berlin Heidelberg.

User-producer interaction in the Brazilian oil industry: The relationship between petrobras and its suppliers of wet Christmas tree

The objective of this work is to analyze the importance of the user-producer interaction for the innovative process of the Brazilian oil industry from the 2000s. To do so, we selected two of the three providers installed in Brazil that produce the set of valves used in the oil wellhead to control its production, set which is called wet Christmas tree (WCT), the Norway's Aker Solutions and the American FMC Technologies. The results of this analysis indicate not only the development of the oil industry in Brazil is marked by a strategy of cooperative innovation, but they also reveal the importance of geographical proximity and direct cooperation, especially between the centers of engineering and research and development of companies. Furthermore, these partnerships are not limited to the adaptation of products to new needs, but they also include the development of new systems. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Leaf anatomical traits are correlated with tree dominance in a Neotropical deciduous forest

Deciduous forests from the neotropics are one of the most endangered forest types in the world due to the exploitation of their natural resources by mankind. Many aspects of these ecosystems have been studied; however, there is a lack of information about leaf structure and the effects of tree dominance on their structural leaf patterns. In this article, we examine leaf anatomy and specific leaf areas (SLA) in 13 tree species differing in their dominance in a Dry Forest site in Central Brazil, relating leaf anatomical traits with phytosociological aspects. Leaf anatomical traits differed according to tree dominance: greater leaf thickness (achieved through greater thickness of the mesophyll), low values of SLA and bigger stomata were found for the most dominant species, whereas the less dominant species showed thinner leaves with high SLA, as well as numerous and small stomata. These responses suggest that tree dominance is an important indirect effect associated with vertical light availability in the forest. These strategies are probably related to the accomplishment of a high performance in carbon gain and water economy, given the distinction in irradiance that the leaves of different species are subject to in the dry forest. © 2013 Copyright The Royal Society of New Zealand.

Quality of performance of the operation of sugarcane mechanized planting in day and night shifts

The sugarcane mechanized planting is becoming increasingly widespread in Brazil due to a higher operability and better working conditions offered to workers compared to other types of planting. Studies related to this topic are insufficient or scarce in Brazil. In this context, the aim of this study was to evaluate the operation quality of sugarcane mechanized planting in two operation shifts, by means of statistical process control. The mechanized planting was held on March 2012 and statistical design was completely randomized with two treatments, totaling 40 replications for the day shift and 40 replications for the night shift. The variables evaluated were: speed, engine rotation, engine oil pressure, water temperature of the engine, effective field capacity and the time consumption hourly and effective fuel. The use of statistical control charts showed that random intrinsic do not cause this process. The tractor alignment error showed outliers in the day and night shifts operations, indicating a possible delay in receiving the signal. The water temperature of the engine and the effective fuel consumption showed lower variability in nighttime operation with average values of 81°C and 22.66 L ha-1, respectively. The hourly fuel consumption had greater variability and consequently lower quality during the night of the operation, with an average consumption of 25.46 L h-1 while the day shift showed 26.86 L h-1.

Prospects for the use of municipal tree pruning wastes in particleboard production

The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.

Avaliação de quatro métodos de restauração florestal de áreas úmidas degradadas no Município de Mineiros do Tietê - SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)