Modelagem de motor de combustão internae simulação do processo de queima de combustível

The internal combustion engine is a heat engine widely used in the automotive industry. In order to better understand its behavior many models in the literature have been proposed in the last years. The 0-D thermodynamic model is a fairly simple tool but it is very useful to understand the phenomenon of combustion inside the chamber of internal combustion engines. In the first phase of this work, an extensive literature review was made in order to get information about this kind of analysis and, after this, apply them in a model able to calculate the instantaneous temperature and pressure in one zone of the combustion chamber of a diesel engine. Therefore some considerations were made with the aim of increasing the accuracy of the model in predicting the correct behavior of the engine, adding the combined effects of heat transfer, leakage and injection. In the second phase, the goal was to study the internal flow of a three-dimensional model of an internal combustion engine. In order to achieve this goal the software Solidworks was used to create the geometries of an engine and the suite of softwares Ansys was used to create the moving mesh (ICEM CFD and CFX-Pre) and to solve the CFD problem (Ansys CFX code). The model was able to perform the air flow simulation during the four-stroke cycle of an engine: admission, compression, expansion and exhaust. The results obtained from both models were suitable and they open a new range of possibilities for future researches on the field

Efeitos da exposição gestacional ao Bisfenol-A, a Genisteína e ao Indol-3-Carbinol sobre morfogênese e carcinogênese de órgãos reprodutores de fêmeas Sprague-Dawley da geração F1

A exposição in utero a xenoestrógenos pode aumentar o risco de neoplasias de natureza endócrina na vida adulta. O Bisfenol A (BPA), componente de resinas e plástico, considerado xenoestrógeno e desregulador endócrino, tem sido investigado pelos seus potenciais efeitos adversos para a saúde humana. Como a Genisteína e o Indol-3-Carbinol possuem propriedades que podem inibir neoplasias de natureza endócrina, é possível que também atuem modulando/modificando os efeitos causados pela exposição gestacional ao BPA. O presente projeto teve como objetivos: (1) Avaliar os efeitos da exposição gestacional ao Bisfenol - A (BPA) sobre a morfogênese do útero e ovários na prole de fêmeas Sprague-Dawley (SD) da geração F1; (2) Avaliar se a exposição gestacional a genisteína e ao indol-3-carbinol altera os efeitos do BPA sobre sobre a morfogênese do útero e ovários na geração F1 e (3) avaliar os efeitos da exposição ao BPA, e às associações BPA e genisteína, BPA e indol-3-carbinol em relação à susceptibilidade a carcinogênese induzida pela N-Metil-N-Nitrosuréia (MNU). Portanto, fêmeas prenhas da linhagem SD foram divididas em 7 grupos experimentais e expostas ao Bisfenol A (BPA) (25 ou 250 ug/kg p.c.) DG 10 até o DG 21 (Moral et al. 2008), além de ração basal ou ração contendo genisteína (250 mg/kg) ou indol-3-carbinol (2000 mg/kg) durante toda a gestação. Parte da prole Fêmeas SD foi sacrificada parte no Dia Pós-Natal (DPN) 21 e parte ao final da 25ª semana após iniciação ou não com a MNU. Ao DPN 21 os ovários e útero foram removidos para contagem de folículos e morfometria, respectivamente. A prole restante de fêmeas recebeu uma única dose de MNU (50 mg/kg) ou solução de NaCl (1 ml/kg) no DPN 51 e foi sacrificada na 25ª semana após a aplicação de MNU ou de NaCl. Ovários e útero foi removidos para análises histológicas, incluindo a determinação de lesões proliferativas ...

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Auxílio do geoprocessamento para a geração do mapa de suscetibilidade à erosão: o caso do córrego Mandu, Rio Claro/SP

The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources

O Programa de Aquisição de Alimentos e os agricultores familiares do município de Rio Claro-SP: diversidade da produção, destinação e geração de renda

A Agricultura exerce papel fundamental na economia de um país, seja ela para emprego de mão de obra e geração de renda, seja para produção de alimentos destinados para a exportação e consumo interno. No Brasil a Agricultura familiar é responsável por produzir uma parcela importante de alimentos consumidos pela população nacional. Durante a década de 1990, políticas públicas foram sendo implantadas para auxiliar o desenvolvimento rural, tendo como público alvo a agricultura familiar e incidindo sobre entraves para o seu desenvolvimento, como a questão da comercialização dos produtos advindos desse segmento. Em 2003, O Programa de Aquisição de Alimentos (PAA), foi instituído pelo artigo 19 da lei federal 10.696, que tinha como objetivo promover a inclusão social e econômica no campo por meio do fortalecimento da agricultura familiar, através da aquisição de alimentos desses produtores. Tais alimentos adquiridos são destinados a ações de alimentação empreendidas por entidades das redes sócioassistenciais, Bancos de Alimentos e para famílias em situação de vulnerabilidade social. O presente trabalho consistiu em um estudo de caso, que teve como objetivo diagnosticar a influência do PAA no município de Rio Claro (SP), quantificando o número de agricultores que participavam do programa no município, e, identificando a diversidade e quantidade de alimentos produzidos destinados ao PAA. Foram também analisados os valores destinados ao programa desde sua implantação. Além disso, foram mapeadas as entidades sócio-assistenciais que receberam os alimentos destinados ao programa. Com base na leis de nº 10.696/2003 e nº 11.326/2006, e os Decretos de nº 6.447/2008 e nº 6.959/2009, que dão providências ao PAA, foram realizadas coletas de dados e informações junto às Secretarias de Ação Social e ao Banco de Alimentos do município de Rio Claro... (Resumo completo, clicar acesso eletrônico abaixo)

Geração de energia elétrica a partir da concentração solar

The current world's need for clean and renewable energy sources aligned with the strong Brazilian growth looking to diversify its electric power generation sources, highly dependent on hydropower and petroleum encourages the implementation of technologies that reach this growth with diversity and cleaning. The sun energy source is considered inexhaustible and can meet the demand for energy through thermo solar plants to generate electricity. Several technologies are being studied and developed in the world and they can be used to generate electricity from the solar concentration, but in Brazil its use is still not found commercially. It is therefore essential to understand these technologies and develop knowledge about them so they can be implemented in Brazil. This work brings an overview of the thermo solar generation in Brazil, showing the different technologies and a thermodynamic simulation of one of such technologies considering a hybrid plant with complementary generation biomass, aiming at the generation of 1 MW in the Brazilian Northeast

Calibração do Modelo de TBC para cálculos de espectros de raios-X

As normas nacionais e internacionais prevêem que a manutenção dos níveis de radiação deve estar abaixo do permitido. Sendo assim, a ICRP [1] (International Commission on Radiological Protection) exige métodos de otimização para garantir que o público esteja exposto aos menores níveis de radiação possíveis. Como método de otimização, aproximações teóricas e semi-empiricas podem realizar uma determinação do espectro de raios-X, sendo fundamental para o diagnóstico de energia, estimando a dose de radiações em pacientes e formulando modelos de blindagem. Métodos adequados de radioproteção foram desenvolvidos na física médica como a medicina nuclear, a radioterapia e a radiologia diagnóstica. Um dos métodos semi-empiricos utilizados é o modelo de TBC que é capaz de reproduzir e calcular os espectros gerados pelo anodo de tungstênio. Com o modelo de TBC modificado é possível também obedecer às exigências das barreiras protetoras presentes na radiologia, levando em conta a forma de onda arbitrária e a filtração adicional na geração do espectro não presente no modelo original. Além disso, realiza-se a calibração do espectro gerado para que o modelo de TBC represente a quantidade e comportamento de radiações típicas. Dessa forma, realiza-se uma revisão do modelo de TBC implementando-o ao programa matemático Matlab e comparando-o com os resultados adquiridos pelo Código MCNP-5 no Método de Monte Carlo. Os resultados encontrados são bastante satisfatórios, tanto em termos quantitativos quanto qualitativos dos feixes. Para a calibração, desenvolve-se uma análise dos espectros gerados pelo TBC Modificado aplicado ao programa Mathcad e Matlab sob as mesmas condições. Os espectros gerados apresentam o mesmo comportamento, diferindo em até 12% nos valores encontrados para camadas semi-redutoras, coeficiente de homogeneidade e energia efetiva

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Educação e trabalho: as políticas públicas e as articulações das ações de qualificação e geração de emprego para a juventude

This paper analyzes the transformations in Brazilian society, especially in relations between the fields of work, education and youth. The implementation of a new logic in the process of capital accumulation, changes meant to hit the job market, causing new social issues, especially for youth, which can be translated by rising unemployment and new job settings, thus, have sparked a broad debate around the requirements that the market imposes on that intend to engage in it, relations skills, knowledge and ability to enter the labor market of the population, reissuing the discussion on social inequalities that required the field of alternative public policies to address this situation of exclusion. Turning to the reflection on the process of qualification / training and placing young people in employment relationships, this study aims to address and reflect on educational policies aimed at the inclusion ofyouth in the labor market, as well as analyze the actions of generating jobs and skills for young people between 18 and 29 years to do so, we will examine the National Youth Inclusion Program- PROJOVEM - sponsored by the Federal Governrnent, which aims to expand the service to the youngsters excluded from school and vocational training, allowing young people to be reintegrated into the educational process, receiving social skills training

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making

Projeto e implantação de pequena central de geração hidrelétrica: análise de caso

The objective of this work is to study the implantation feasibility of a small hydropower system in a rural area in Guaratinguetá. Due to its location and accessibility, and the costs involved in extending the public distribution line to the property it could turn become viable the construction of an individual electric generation system. As alternatives, a solar photovoltaic system and combustion engine-electric generator systems were considered. However, the existence of a small river inside the property, the construction of a micro hydropower plant was taken into account. The choice of the micro power hydropower plant was determined by the owner and was based on the costs. The topographic and hydrological profiles as well as the geometrical characteristics of the system, including the civil infrastructure needed and the more adequate turbine, were determined. Finally, the cost spreadsheet was set and the results were compared with those calculated for the extension of the available public distribution system

Aplicação do conceito de geração distribuída a um sistema fotovoltaico residencial

This work presents a study about distributed generation using photovoltaic systems in the context of smart grids. The characteristics of a Smart Grid and the several aspects this concept involves - distributed generation among them - are discussed. There are also examples of equipment, like smart meters, and of national and international projects. The specificities of distributed generation and the rules and standards necessary in this sort of installation are talked through with focus in the solar energy generation method. Regarding photovoltaic systems, the working principles of the panels are presented, along with its main electrical characteristics and the technologies available. Finally there is a study concerning the sizing of a distributed generation system that involves photovoltaic panels in a residential plant. An analysis of the costs and return of investment period is made about the specific case in consideration.

Geração de indicadores de produção e citação científica em revistas de Ciência da Informação: estudo aplicado à base de dados BRAPCI

Pós-graduação em Ciência da Informação - FFC

Localização e preço de contrato ótimo da geração distribuída em sistemas de distribuição radiais de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Modelagem do equilíbrio térmico de frangos de corte: um estudo da geração e transferência de calor

Pós-graduação em Zootecnia - FCAV