Influence of ideal and non-ideal excitation sources on the dynamics of a nonlinear vibro-impact system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A two-fluid model for refrigerant flow through adiabatic capillary tubes

This work presents a numerical model to simulate refrigerant flow through capillary tubes, commonly used as expansion devices in refrigeration systems. The flow is divided in a single-phase region, where the refrigerant is in the subcooled liquid state, and a region of two-phase flow. The capillary tube is considered straight and horizontal. The flow is taken as one-dimensional and adiabatic. Steady-state condition is also assumed and the metastable flow phenomena are neglected. The two-fluid model, considering the hydrodynamic and thermal non-equilibrium between the liquid and vapor phases, is applied to the two-phase flow region. Comparisons are made with experimental measurements of the mass flow rate and pressure distribution along two capillary tubes working with refrigerant R-134a in different operating conditions. The results indicate that the present model provides a better estimation than the commonly employed homogeneous model. Some computational results referring to the quality, void fraction, velocities, and temperatures of each phase are presented and discussed.

Transformações de Lorentz e seus invariantes

In this paper, we will show the types of Lorentz transformations, from the most described in books, special Lorentz transformation that relates two inertial systems whose relative velocities are directed along an axis of the respective bases systems. However, we will see a peculiarity that goes unnoticed in this transformation, although they have reported in many books a parallel between the transformation inertial systems, due to the fact that the speed is parallel to an axis, it is actually a semi-parallel processing. The next transformation that we will see is one in which a system moves with a relative speed that has arbitrary direction with respect to a given system, we will show that this transformation may be appointed as non-rotational Lorentz transformation. Before obtain, the later type of transformation, the rotational Lorentz transformation, which is the interface between Special Relativity and General Relativity, we will describe the systems to be rotated, not just inertial systems, show what the characteristics are that define the non-rotational and rotational transformations. The in last topic of this chapter we will also show how the idea of Thoma’s theorythat uses this transformation to create what he defines as the proper coordinate axes of the particleused to obtain the factor 1/2 electron spin. In the last chapter we show how the Lorentz invariants are obtained, quantities measures that are also in different Lorentz reference, with the focus on mass that has erroneously been described in many books, that varies according to the agreement reference system

Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Equilíbrio muscular e pico de torque após jogo de futsal

Indoor soccer is a modality of sport similar to football, which is accompanying an increasing of the number of participants. With the growth of this sport, increased as well the number of injuries, which has been requiring greater attention and care from the health professionals. AIMS: To investigate the functional balance before and after an indoor soccer game and analyze the maximum force before and after the game, in order to verify if there is a great loss of muscle strength of knee flexors and extensors during the game. METHODS: The study included seven amateur soccer players. The isokinetic evaluation was made using the Biodex 3 isokinetic dynamometer at velocities of 60°/s and 180°/s with five repetitions at each velocity for each leg. Further, the study analyzed the peak torque of each leg at each speed of the extensor muscles and flexor concentric and eccentric. RESULTS: Compared to the peak torque before and after the game, there were no significant differences. At 60°/s in the non-dominant leg, peak torque decreased after the game of the extensor concentric and eccentric. In the dominant leg there was a decrease of peak torque in eccentric flexion at 60°/s and concentric flexion to 180°/s. Comparing the peak torque between dominance, there was any significant differences in speed. However, in eccentric flexion at 60°/s before the match there was a significant difference. The peak torque of the dominant leg showed better results than the non-dominant leg. Regarding the functional balance there was no statistically significant differences between the muscles involved. CONCLUSION: From the results achieved, it is possible to conclude that the peak torque of flexor eccentric decreases depending on the length of the exercise. This muscle is stronger in the dominant leg, comparing to the non-dominant leg

Velocidade de semeadura e profundidade da haste em sistema plantio direto de milho e soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Qualidade da semeadura direta de milho com dois mecanismos de pressão no disco sulcador sob duas velocidades

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Emprego de técnica dedicada de análise de imagem na avaliação do produto GT no desempenho da floculação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inspeção de materiais compósitos utilizando ondas acústicas guiadas

Pós-graduação em Engenharia Elétrica - FEIS

Distance exercised during submaximal training on race winnings for Thoroughbred racehorses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Application of effective theory and Grassmann variables to model compact binaries with spin

Pós-graduação em Física - IFT

Does proprioceptive system stimulation improve sit-to-walk performance in healthy young adults?

[Purpose] Sit-to-walk performance is linked to proper proprioceptive information processing. Therefore, it is believed that an increase of proprioceptive inflow (using muscle vibration) might improve sit-to-walk performance. However, before testing muscle vibration effects on a frail population, assessment of its effects on healthy young people is necessary. Thus, the aim of this study was to investigate the effects of muscle vibration on sit-to-walk performance in healthy young adults. [Subjects and Methods] Fifteen young adults performed the sit-to-walk task under three conditions: without vibration, with vibration applied before movement onset, and with vibration applied during the movement. Vibration was applied bilaterally for 30 s to the tibialis anterior, rectus femoris, and upper trapezius muscles bellies. The vibration parameters were as follows: 120 Hz and 1.2 mm. Kinematics and kinetic data were assessed using a 3D motion capture system and two force plates. The coordinates of reflective markers were used to define the center-of-mass velocities and displacements. In addition, the first step spatiotemporal variables were assessed. [Results] No vibration effect was observed on any dependent variables. [Conclusion] The results show that stimulation of the proprioceptive system with local muscle vibration does not improve sit-towalk performance in healthy young adults.

On soft limits of large-scale structure correlation functions

We study soft limits of correlation functions for the density and velocity fields in the theory of structure formation. First, we re-derive the (resummed) consistency conditions at unequal times using the eikonal approximation. These are solely based on symmetry arguments and are therefore universal. Then, we explore the existence of equal-time relations in the soft limit which, on the other hand, depend on the interplay between soft and hard modes. We scrutinize two approaches in the literature: the time-flow formalism, and a background method where the soft mode is absorbed into a locally curved cosmology. The latter has been recently used to set up (angular averaged) 'equal-time consistency relations'. We explicitly demonstrate that the time-flow relations and 'equal-time consistency conditions'are only fulfilled at the linear level, and fail at next-to-leading order for an Einstein de-Sitter universe. While applied to the velocities both proposals break down beyond leading order, we find that the 'equal-time consistency conditions'quantitatively approximates the perturbative results for the density contrast. Thus, we generalize the background method to properly incorporate the effect of curvature in the density and velocity fluctuations on short scales, and discuss the reasons behind this discrepancy. We conclude with a few comments on practical implementations and future directions.

Acoustic radiation force impulse elastography of the spleen in healthy dogs of different ages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)