A Quality Assessment of Titanium Castings Produced in an Experimental Short-Heating-Cycle Investment

The aim of this study was to evaluate the quality of casting produced in an experimental short-term heating-cycle investment. Thus, reaction layer and castability of titanium casting using an experimental spinel-based investment (VR) with short heating cycle were compared with the commercial short-heating-cycle spinel-based investment Trinell (TR), the silica-phosphate-based investment Rematitan Plus ( RP), and the conventional spinel-based investment Rematitan Ultra (RU). VR has polymeric fibers added to inorganic particles. Reaction layer assessments were carried out using Vickers hardness and elemental analysis using dispersive X-ray microanalysis (EDX). Mesh patterns were used for castability test, and powder characterization was made by scanning electron microscopy (SEM). Hardness evaluation showed no difference among the investments between 100 and 200 mu m. The most important contaminant element for VR, TR, and RU was oxygen. Higher levels of mold filling were found for TR, VR, and RU compared with that obtained with RP. The quality of castings, characterized by means of the assessments of reaction layer and castability, made from the VR was similar to the commercial investments TR and RU but superior to the RP.

Bond strength of composite to dentin: effect of acid etching and laser irradiation through an uncured self-etch adhesive system

This study evaluated the effect on micro-tensile bond strength (mu-TBS) of laser irradiation of etched/unetched dentin through an uncured self-etching adhesive. Dentinal surfaces were treated with Clearfil SE Bond Adhesive (CSE) either according to the manufacturer's instructions (CSE) or without applying the primer (CSE/NP). The dentin was irradiated through the uncured adhesive, using an Nd: YAG laser at 0.75 or 1 W power settings. The adhesive was cured, composite crowns were built up, and the teeth were sectioned into beams (0.49 mm(2)) to be stressed under tension. Data were analyzed using one-way ANOVA and Tukey statistics (alpha = 5%). Dentin of the fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). The results showed that non-etched irradiated surfaces presented higher mu-TBS than etched and irradiated surfaces (p < 0.05). Laser irradiation alone did not lead to differences in mu-TBS (p > 0.05). SEM showed solidification globules on the surfaces of the specimens. The interfaces were similar on irradiated and non-irradiated surfaces. Laser irradiation of dentin through the uncured adhesive did not lead to higher mu-TBS when compared to the suggested manufacturer's technique. However, this treatment brought benefits when performed on unetched dentin, since bond strengths were higher when compared to etched dentin.

Implementação da educação inclusiva: análise do projeto político pedagógico das escolas

The Policy Pedagogical Project can be understand like a guide element of education actions, that links itself to a history social project, bringing an specific way to understand the school and its function in society. The actual brazilian legislation is based on inclusive educational policy defended since 1990 by Ministry of Education. Faced this situation the present research intends verify if the schools are organized to act into this new paradigm, using analisis of the Policy Pedagogical Projects. That's why were analized the projects of 6 public schools of basic study that attend impaired students in regular classes. Those projects were analized based on a inclusive school indicators purposed by the Ministry of Education, that is based on a specific theorical reference and on determined actions that favor the impaired student learning. The data pointed that the majority of schools shows in theorical camp assumptions vinculated to Inclusive Education Policy. However, the presented actions are still shy and limited, so there is no differentiated purpose that attend the educational needs of impaired students. It concludes that the speech about inclusive education have already been assimilated by the school, however the actions are still begginers. The Pedagogical Project colectively built, could constitute an effective instrument to think about an make a quality school, an emancipatory school for all.

Online Shopping Websites: An Evaluation of User Experience and Interface Ergonomic Criteria from the Perspective of Older Users

This paper presents a user experience evaluation of two online shopping websites from the perspective of older users (those aged 50 and older). Two online shopping websites were evaluated using methodological procedures established in prior research [1]. The methodology consists of four steps: (1) heuristic interface evaluation using an ergonomic criteria checklist, (2) online identification and experience questionnaire, (3) evaluation of user experience and interface interaction, and (4) satisfaction questionnaire. Results of the study revealed the analyzed websites are not suitable for older users, who find it difficult to interact with these interfaces.

Ecologia de cultivos: caracterização dos aspectos ecológicos dos diferentes cultivos no município de Cristais Paulistas-SP

Planning is an essential instrument for the agricultural occupation of the lands, because it supports the activities of food production and raw materials. It must be driven by techniques that provide the sustainability of these activities, so that also ensures the environmental balance of agroecosystems. Lands misuse can be considered as one of the causes of frustration of agricultural activities. Thus, the occurrence of discrepancies between the effective use (real use) of the land and its agricultural aptitude can compete, in many cases, to the decrease of productivity, as well as for soil degradation. In this way, this research intends to study the relationship between the temporary cultivations, halfperennial cultures, perennial and its developmental environment, determining the edaphoclimatic characteristics of landscapes. From then on, a letter shall be subject to the use and occupation of the soil for agriculture in the municipality of Cristais Paulista-SP, aiming to describe the spatial organization of land use and vegetation cover, and emphasizing management and conservative practices. For that, climatic factors were characterized, fundamentally humidity, temperature and luminosity; edaphics, including parental material, chemical and physical properties, fertility, soil temperature and climatic zoning; biotic, referring to the suitability of different cultures or to be implanted; physical, such as geomorphology, slope, geology, hypsometry and hydrology; socioeconomic, in particular production and marketing seasons; and the way they all, together, affect the adaptation, distribution and production of crops. Using this information, the zoning of the area of study was done based on the 21 nominated groups obtained, in addition to recommendations and suggestions for handling each type of cultivation... (Complete abstract click electronic access below)

Caracterização do desempenho de escolares com e sem dificuldades de aprendizagem em tarefas de consciência fonológica

Learning to read and write at an early stage is the process of transferring the sound form of the spoken language for the graphical form of writing, a process, a time that in our system of alphabetical called writing, the letters are graphical representations in the level of phoneme. So that this representation occurs, it is necessary that the individual already can of some form perceive and manipulate the different sonorous segments of the word. This capacity of perception directed to the segments of the word calls Phonological Awareness. Thus, it was established had for objective to verify the pertaining to school performance of 1ª to 4ª series with and without of learning in Tests of Phonological Awareness. Fourth children with age average of 9 years and 3 months without learning disabilities had been submitted to the Protocol of Phonological Awareness (CIELO, 2002) using of this instrument had participated of this study 80 pertaining to school of both only the phonological tasks. The data received from quantiqualitative approach whose results were extracted inferences. The statistically significant results occurred in the tasks of Realism Face Detection, Syllables, Detecting Phonemes, Phonemic Synthesis and Reversal Phonemic. Based on the results we observed that children without learning difficulties performed better on all tasks mentioned above

An evolutionary approach to improve connectivity prediction in mobile wireless sensor networks

Connectivity is the basic factor for the proper operation of any wireless network. In a mobile wireless sensor network it is a challenge for applications and protocols to deal with connectivity problems, as links might get up and down frequently. In these scenarios, having knowledge of the node remaining connectivity time could both improve the performance of the protocols (e.g. handoff mechanisms) and save possible scarce nodes resources (CPU, bandwidth, and energy) by preventing unfruitful transmissions. The current paper provides a solution called Genetic Machine Learning Algorithm (GMLA) to forecast the remainder connectivity time in mobile environments. It consists in combining Classifier Systems with a Markov chain model of the RF link quality. The main advantage of using an evolutionary approach is that the Markov model parameters can be discovered on-the-fly, making it possible to cope with unknown environments and mobility patterns. Simulation results show that the proposal is a very suitable solution, as it overcomes the performance obtained by similar approaches.

A visão do usuário sobre o serviço público odontológico e a autopercepção em saúde bucal

Pós-graduação em Odontologia Preventiva e Social - FOA

A method for retrieving endodontic or atypical non-endodontic separated instruments from the root canal: a report of two cases

Aim: This clinical report presents a new method for retrieving separated instruments from the root canal with minimally invasive procedures. Background: The presence of separated instrument in root canal may interfere in the endodontic treatment prognosis. There are several recommended methods to retrieve separated instruments, but some are difficult in clinically practice. Case report: This study describes two cases of separated instrument removal from the root canal using a stainless-steel prepared needle associated with a K-file. Case 1 presented a fractured gutta-percha condenser within the mandibular second premolar, it was separated during incorrect intracanal medication calcium hydroxide placement. Case 2 had a fractured sewing needle within the upper central incisor that the patient used to remove food debris from the root canal. After cervical preparation, the fractured instruments were fitted inside a prepared needle and then an endodontic instrument (#25 K-file) was adapted with clockwise turning motion between the needle inner wall and the fragment. Conclusion: The endodontic or atypical nonendodontic separated instrument may be easily pull on of the root canal using a single and low cost device. Clinical significance: The methods for retrieving separated instruments from root canal are difficult and destructive procedures. The present case describes a simple method to solve this problem.

Effectiveness of several solutions to prevent the formation of precipitate due to the interaction between sodium hypochlorite and chlorhexidine and its effect on bond strength of an epoxy-based sealer

To evaluate the effectiveness of isopropyl alcohol, saline or distilled water to prevent the precipitate formed between sodium hypochlorite (NaOCl) and chlorhexidine (CHX) and its effect on the bond strength of an epoxy-based sealer in radicular dentine. Methodology The root canals of 50 extracted human canines (n = 10) were instrumented. In G1, root canals were irrigated with 17% EDTA and 2.5% NaOCl; G2, as G1, except that 2% CHX was used as the final irrigant. In the other groups, intermediate flushes with isopropyl alcohol (G3), saline (G4) or distilled water (G5) were used between NaOCl and CHX. The specimens were submitted to SEM analysis to evaluate the presence of debris and smear layer, in the apical and cervical segments. In sequence, fifty extracted human canines were distributed into five groups (n = 10), similar to the SEM study. After root filling, the roots were sectioned transversally to obtain dentine slices, in the cervical, middle and apical thirds. The root filling was submitted to a push-out bond strength test using an electromechanical testing machine. Statistical analysis was performed using Kruskal–Wallis and Dunn's tests (α = 5%). Results All groups had similar amounts of residue precipitated on the canal walls (P > 0.05). The push-out bond strength values were similar for all groups, independently of the root third evaluated (P > 0.05). Conclusions Isopropyl alcohol, saline and distilled water failed to prevent the precipitation of residues on canal walls following the use of NaOCl and CHX. The residues did not interfere with the push-out bond strength of the root filling.

Influence of Sealer Placement Technique on the Quality of Root Canal Filling by Lateral Compaction or Single Cone

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optimal clearance of Sporothrix schenckii requires an intact Th17 response in a mouse model of systemic infection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Wave reflection at the end of a waveguide supported by a nonlinear spring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cleaning capacity promoted by motor-driven or manual instrumentation using ProTaper Universal system: Histological analysis

The aim of this study was to assess the cleaning capacity of the Protaper system using motor-driven or manual instrumentation. Materials and Methods: Ten mandibular molars were randomly separated into 2 groups (n = 5) according to the type of instrumentation performed, as follows: Group 1 - instrumentation with rotary nickel-titanium (Ni-Ti) files using ProTaper Universal System (Dentsply/Maillefer); and, Group 2 - instrumentation with Ni-Ti hand files using ProTaper Universal (Dentsply-Maillefer). Afterwards, the teeth were sectioned transversely and submitted to histotechnical processing to obtain histological sections for microscopic evaluation. The images were analyzed by the Corel Photo-Paint X5 program (Corel Corporation) using an integration grid superimposed on the image. Results: Statistical analysis (U-Mann-Whitney - P < 0.05) demonstrated that G1 presented higher cleaning capacity when compared to G2. Conclusions: The rotary technique presented better cleaning results in the apical third of the root canal system when compared to the manual technique.

Real-time Sampling of Particulate Matter Smaller than 2.5 µm from Amazon Forest Biomass Combustion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)