As revoltas dos trabalhadores em Jirau (RO): degradação do trabalho represada na produção de energia elétrica na Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso do ATP para simulações de descargas atmosféricas em para-raios de 15 kV dos serviços auxiliares de subestações de energia elétrica

This paper addresses the topics required for the selection of surge arresters used, the output of autotransformers, which protect the system Auxiliary Services (SE) of an electrical substation. Surge arresters used are part of the Protection System Lightning (SPDA). Transmission lines mostly run through regions with orographic well diversified and have constant weather changes, which lead to many undesirable interactions with electromagnetic phenomena, such as giving rise to blackout on 10 November 2009, which left nine states without power, which led to unplanned shutdowns in the system that left millions of people without electricity. This work of completion is to determine whether the method used in the selection of surge arresters meet the protection needs faced by a substation auxiliary services, through the use of software use ATPDraw

Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Técnicas de energia elétrica sustentável aplicadas em edificações

One of the majors concerns in society today is to decrease the environmental impact caused by human activities and natural resource exploration. From this need to be more careful with the environment arose, in the field of civil construction, the term sustainable building. Projects that use natural resources rationally, without ceasing to bring comfort and functionality for customers, are becoming more a reality. This paper presents the share of electric energy in a sustainable building, with the analysis of the available renewable energies used in a project, presentation of new constructive techniques and technologies that are constantly emerging to achieve greater energy efficiency, with an appropriate use of energy received, also a decrease of the energy consumed by some devices present in a residence or business

Estudo e análise do risco e da viabilidade econômica do mercado cativo e do mercado livre de energia elétrica no terceiro ciclo tarifário

In 2004 two trading environment for contracts of purchase and of electricity energy were established, the Regulated Contracting Environment (RGE) and the Free Contracting Environment (FCE). In the first one, consumers can only buy their energy directly from local electricity distribution, and in the second one, consumers can choose their delivery, amount and type of energy that they will burn through bilateral contracts. Thus, before deciding to migrate to the FCE, it is necessary understanding the rules of marketing, the risk involved and the economic viability of the two markets so can determine which environment has more benefits to the consumer. This paper aims to offer tools to support takeover decision of potentially free costumers, who have the option to migrate to market in order to evaluate the benefits and disadvantages of each market. This paper has also considered the new rules of the third rate cycle, where consumers can opt for green tax. The methodology presented is based on calculations of spending with energy and the risk of flag in captive market and free market in one year

Principais práticas e indicadores de sustentabilidade corporativa no setor de energia elétrica no Brasil

The questions involving environment and society have been increasingly considered into account when companies make business decisions. However many of them have not yet incorporated sustainability effectively in their business plan, sometimes performing only a few external actions and outside their area of expertise. The concept of corporate sustainability is within this context, and therefore the practice of companies consider, the environmental and social issues into their strategies, along with economic issues. This work has as main objective to identify what are the key indicators and related practices of the concept of corporate sustainability that has been introduced in companies on environmental reference of a certain sector of the Brazilian economy. The sector that was chosen is electric power, having enormous significance both in economy, society and environment. The results indicate that the main practice are in the areas of energy efficiency, security and good relationship with its key business stakeholders

Comercialização de energia elétrica no Brasil

How companies can sell their surplus production capacity of electric power in Brazil? This work was developed from the question presented and focusing on clarification of procedures to enter the Brazilian electricity market by providing basic guidelines based on resolutions by National Agency of Electric Energy, National System Operator procedures and rules of the Assembly of Electric Energy Commercialization. It features subsidy to companies that fit this profile to evaluate the possibility to sell their surplus electricity. The general aim was to analyze the procedures and the necessary steps to make this sale happen. Was developed through a literature review where an overview of the Brazilian electric sector and a case study of a company that has excess capacity of electricity, but doesn’t make its marketing. Resulted in the expected clarification as well as the incentive for companies through the information presented, the entry in this trade since power is still crucial to the country's economic growth and ensure its availability in quantity demanded is a challenge of the utmost importance for satisfactory results are achieved economic development contributing to the progress of our society

Geração de energia elétrica a partir da concentração solar

The current world's need for clean and renewable energy sources aligned with the strong Brazilian growth looking to diversify its electric power generation sources, highly dependent on hydropower and petroleum encourages the implementation of technologies that reach this growth with diversity and cleaning. The sun energy source is considered inexhaustible and can meet the demand for energy through thermo solar plants to generate electricity. Several technologies are being studied and developed in the world and they can be used to generate electricity from the solar concentration, but in Brazil its use is still not found commercially. It is therefore essential to understand these technologies and develop knowledge about them so they can be implemented in Brazil. This work brings an overview of the thermo solar generation in Brazil, showing the different technologies and a thermodynamic simulation of one of such technologies considering a hybrid plant with complementary generation biomass, aiming at the generation of 1 MW in the Brazilian Northeast

Análise comparativa entre Brasil e Alemanha sobre autoprodução de energia elétrica residencial

The energy crisis has affected many countries. With the growing warning with the emission in the atmosphere and the lack of resources, the seek for sustainable sources for energy genaration have become even bigger. Some Countries, as Germany, started first in this journey, creating an incentive program to self-generation with renewable sources (wind, photovoltaics, biomass, etc.), giving priority for smaller plants. In Germany the program called EEG started in 2004. In Brazil, since the beggining of 2012, the self-generators did not know how they could be beneficted for self-generation, and self-generation didn't become commun in the country. However, with NR 482, of April 17th, 2012, the parameters were defined, and the self-generator could have a guideline. Therewith, studyies can be redirected for a better knowlegde of the conditions the self-generator will be sujected, in addition to Germany's case as reference to compare with Brazil's case. In this paper these studies are made, focused in wind power (wind turbines) and photovoltaic panels

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Análise do consumo de energia elétrica e da eficiência energética em uma indústria de processamento de madeira

In the industries of wood processing (sawmills), where timber is sawn in equipment such as band saws, circular saws, trowel, thicknessers, among others, that mechanically transform this resource and use of electric motors, which are not unusually poorly scaled working or overloaded, often a factor that is not found in these industries and has fundamental importance in the production process is energy efficiency that is achieved by both technological innovation and through all the practices and policies that aim to lower energy consumption, lowering energy costs and increasing the amount of energy offered no change in generation. For both during the design of an electrical installation, both overall and in various sectors of the installation, investigations are necessary, considerations and uses of variables and factors that put into practice the theme of energy efficiency. Therefore, in this paper, these factors were calculated and analyzed for a wood processing industry (sawmill) in the municipality of Taquarivaí - SP, namely: active power, power factor, demand factor and load factor. Where they were small in relation to the literature, these events that occur when devices are connected at the same time and due to the conditions of processing the wood, where the engines have large variations in electricity consumption during the unfolding of the same, due to efforts with the load and idle moments between each machining operation in the equipment

O papel do gás de petróleo na matriz de energia elétrica brasileira - presente e futuro

This paper presents a study based on literature and examples found on literature of the potential of petroleum gas to be used as a primary source to generate electricity. The steady increase electricity demand in Brazil makes desirable an effective use of all available primary sources, combined with this need the momentum of the country with the discovery of the presalt reserves becomes interesting the use of this gas, often wasted, for generating electricity. The electricity generation in this work is illustrated by the cogeneration in oil refining plants that have the combined cycle thermal operation. The ultimate goal is to provide a text to identify the advantages, disadvantages and trends of this type of generation

Recuperação da palha da cana-de-açúcar para a produção de energia elétrica e etanol celulósico

Pós-graduação em Engenharia Mecânica - FEIS

Algoritmo híbrido neural-imuno aplicado ao diagnóstico de distúrbios de tensão em sistemas de distribuição de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Alocação ótima de equipamentos SVC e TCSC na rede de transmissão de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS