Diversidade e evolução da microbiota lática autóctone em queijo Muçarela de búfala e aplicação tecnológica dos isolados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Behavior of Staphylococcus aureus and autochthone microbiota in fresh sausages added of sodium nitrite and stored under refrigeration

Fresh sausages are cured meat products that may be contaminated with Staphylococcus aureus during the manufacturing procedure, which is frequently related with inadequate handling practices. The use of nitrite in meat products has proven efficacy against Clostridium botulinum, and studies indicate that bactericidal action against S. aureus depends on factors that are intrinsic and extrinsic to the product. The objective of the present study was to evaluate the effect of nitrite concentration, and pH on S. aureus and psychrotrophic autochthone microbiota in fresh sausages stored at different times and temperatures. Fresh sausage were produced at nitrite concentrations 50, 150 and 200ppm and contaminated with S. aureus. The sausages were storage at refrigeration (7 and 12 degrees C) and the quantification of S. aureus and psychrotrophic microorganisms was carried out on days 0, 2, 4, 7, and 10. Results showed that nitrite concentrations and the temperatures used had minimal effect on the multiplication of S. amens and psychrotrophic autochthone microbiota. Final counts depended only on the length of storage: at the end of 10 days, counts were statistically similar in the different groups, showing that temperature and nitrite concentrations used did not control microbial growth effectively. It is suggested that the product should be stored below 7 degrees C or at freezing temperatures for greater microbiological stability.

Pasteurelose em juvenis de cobias (Rachycentron canadum) criados em tanques-redes no litoral norte do estado de São Paulo - Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Storage media for avulsed teeth: a literature review

Dental avulsion is the most severe type of traumatic tooth injuries because it causes damageto several structures and results in the complete displacement of the tooth from its socketin the alveolar bone. The ideal situation is to replant an exarticulated tooth immediatelyafter avulsion because the extraoral time is a determinant factor for treatment successand for a good prognosis. However, it is not always possible. The success of replantationdepends on a number of factors that may contribute to accelerate or minimize theoccurrence of root resorption or ankylosis, among which is the type and characteristicsof the medium used for temporary storage during the time elapsed between avulsionand replantation. Maintaining the tooth in an adequate wet medium that can preserve,as longer as possible, the vitality of the periodontal ligament cells that remain on rootsurface is the key to success of replantation. Recent research has led to the developmentof storage media that produce conditions that closely resemble the original socketenvironment, with adequate osmolality (cell pressure), pH, nutritional metabolites andglucose, and thus create the best possible conditions for storage. Although these storagemedia can now be purchased in the form of retail products, the most common scenariois that such a product will not be readily available at the moment of the accident Thispaper reviews the literature on the different storage media that have been investigatedfor avulsed teeth based on full-length papers retrieved from PubMed/Medline, Lilacs, BBOand SciELO electronic databases using the key words storage medium , transportationmedium , avulsion , tooth avulsion , replantation , tooth replantation , milk and propolis .After application of inclusion and exclusion criteria, 39 papers were selected and criticallyreviewed with respect to the characteristics, efficacy and ease of access of the storagemedium. The review of the lite

Efeito da desinfecção e do tempo de armazenagem na molhabilidade de moldes de alginato

The cares at the manipulation of the alginate (condensation, disinfection of the impression and the time elapsed until the leak of the plaster) deserve special attention considering the great amount of distortions occurring every time the impression is not fill of plaster in a brief space of time and appropriate storage conditions. Besides its adaptation to the plaster suffers influence of the events happened after the impression is removed of the mouth. The purpose of this research was to evaluate the wetting capacity of three brands of alginate (Jeltrate™,Hydrogum™ e Orthoprint™) by the plaster type III (Rio™) under the influence of disinfection by sodium hypochlorite 1% sprays and the time of storage of 15 minutes,30 minutes, 1 hour, 6, 12 and 24 hours. There were made 60 impressions of each brand of alginate divided in two groups (water and sodium hypochlorite 1%) rearranged after the application of the sodium hypochlorite spray according to the storage time (15 or 30 minutes and 1,6,12, or 24 hours). On the surface of the impressions 2ml of plaster were flowed, proportioned and condensed in agreement with manufacturer‘s instructions. After the final setting expansion the casts were sectioned vertically and medially, regularized at the cut surface (emery paper 400) and setted for reading the contact angle at the microscope Carl Zeiss. The obtained results, submitted to statistical treatment (ANOVA) revealed significant differences when compared the employed solutions (water and sodium hypochlorite 1%) and the time of storage. The sodium hypochlorite 1% exhibited the smallest contact angles and the times of storage of 15 minutes and 6 hours the smallest and larger angles, respectively. It can be concluded that the alginate impressions exhibited larger adaptation to the plaster when disinfected by hypochlorite of sodium 1% and stocked by 15 minutes.

Desenvolvimento de bebida láctea potencialmente probiótica carbonatada: características físico-químicas, microbiológicas e sensoriais

The goal of this work was to develop a strawberry fl avored dairy beverages carbonated and fermented with potential probiotic bacteria. Four formulations of dairy beverages were elaborated: Control (BL); Fermented (BLF); Carbonated (BLC) and Carbonated Fermented (BLFC). In samples submitted for carbonation, a carbonator was used for the carbon dioxide (CO2 ) gas injection dissolved in drinking water and the cultivation consisting of lactic bacteria Lactobacillus acidophilusLA-5®, Bifi dobacterium BB-12® and Streptococcus thermophilus (Biorich, Chr. Hansen) was employed on the fermented samples. The samples were characterized by physical and chemical, microbiological and sensory parameters. The BLC sample showed the presence of yeasts and coliform counts, but the counts indicated that it was suitable for consumption in 28 days time. The BL presented average coliform counts above the limit established by the law after 21 days of refrigerated storage. The presence of lactic bacteria and CO2 and their effects on lower proteolysis indexes, lower pH values and higher acidity values were correlated with signifi cant inhibitory effect of contaminated microorganisms in the BLF and BLFC. The carbonation was not stimulatory for the growth of lactic crops, mainly in the genus Bifi dobacterium spp. and Streptococcus spp. The BLF drink presented greater sensory acceptance and purchase intention test results, however the carbonated beverage presented positive results, with mean values greater than 50% in the acceptance tests with potential inclusion as sensory differential in dairy beverages. Just BLFC drink was considered potentially probiotic, by presenting minimum counts of Lactobacillus spp. during storage. Further studies should be conducted with the technology of carbonation, since it has been proven the correlation of the presence of CO2 with inhibitory effect of contaminated microorganisms and lower physical and chemical changes of dairy beverages.

Isoflavones supplementation of a probiotic soy product: effects on quality characteristics and isoflavones profile

The aim of the present study was to investigate the effect of isofl avones supplementation of a fermented soy product on its sensory acceptance, physicochemical properties and probiotic cell viable count. Additionally we also investigated the ability of the mixed starter cultures (Enterococcus faecium CRL 183 and Lactobacillus helveticus 416) to modify the isofl avones profi le of soy product during the fermentation process. Three products were analysed: soy product fermented with E. faecium CRL 183 and L. helveticus 416, isofl avonessupplemented soy product (fermented with E. faecium CRL 183 and L. helveticus 416; 50mg/100g, Isofl avin®, Galena, Brazil) and unfermented soy product. A panel of judges evaluated the acceptability of the samples on a nine point structured hedonic scale. The chemical composition namely fat, protein, ash and total carbohydrate contents, pH, enumeration of viable Lactobacillus spp. and Enterococcus spp. and quantifi cation of isofl avones using HPLC were investigated. All determinations were conducted after 7 days storage at 10°C. The sensorial acceptance was reduced in the isofl avones-supplemented soy product, but this effect was not signifi cant compared to the sample without isofl avones addition. Chemical composition did not differ (p<0.05) among the samples. Cell viable counts were reduced and total fermentation time was longer in the isofl avonessupplemented soy product, suggesting that the isofl avone addition could inhibit the starter cultures. However, all the products may be considered probiotic since they exhibited lactic acid bacterial populations varying from 2.3 x 109 up to 1.22 x 1010 CFU/mL. Fermentation of soymilk did not change the isofl avones profi le. In conclusion, it was possible to obtain a fermented soy product containing a high isofl avones concentration, adequate sensory and chemical characteristics and lactic acid bacterial viability suffi ciently high to characterize the product as a probiotic. The mixed starter culture was not able to convert the glycoside isofl avones into aglycone or produce equol during the fermented soy product processing.

Adição de plasma bovino em salmouras para injeção de coxão duro bovino (m. Biceps femoris) e seus efeitos no pH e na carga microbiana de bifes cozidos embalados à vácuo e mantidos sob refrigeração

The physical (pH) and microbiological (psychotrofi c microorganisms and lactic bacteria) characteristics of beef outside round (m. Biceps femoris) injected (15%) with brines free of polyphosphates containing and sodium lactate or sodium lactate and sodium diacetate and liquid bovine plasma (PLL and PLO) or dehydrated bovine plasma (PDL, PDO) were evaluated along with beef cuts injected with brines free from plasma, but containing polyphosphates and bacteriostatic agents (CL and CO) and non injected beef cuts (IN), comprising seven treatments of cooked and vacuum packaged beef steaks stored under refrigeration (6ºC) during 43 days. No differences in pH were detected among raw or cooked injected treatments, although IN showed lower pH value in raw beef cuts. The addition of liquid or dehydrated bovine plasma did not affect the microbial load after whole muscles pasteurization, but increased the bacterial counts in cooked beef steaks during refrigerated storage, comparing to treatments with no plasma addition (CL and CO). The storage temperature (6ºC), usually found during commercialization of meat increased the microorganisms growth rate affecting the microbiological quality, especially when plasma was added to the brine.

Caracterização de hambúrguer elaborado com farinha de folhas de Moringa (Moringa oleífera Lam.)

The aim of this study was to determine the antioxidant activity of Moringa (Moringa oleifera Lam.) leaves flour in beef burger during storage for 120 days. Six hamburger formulations were processed: one control (without the use of additives), four with addition of Moringa leaves flour (0.10, 0.15, 0.20, and 0.25 g/100 g aggregate), and one with addition of synthetic antioxidant Propyl Gallate (0.01 g/100 g aggregate). The products were analyzed for their chemical composition with determinations of moisture, protein, dietary fiber, lipids, ash, carbohydrate, and caloric value after preparation. Microbiological and acceptance testing were performed at the beginning and after 120 days of storage. Determination of pH, instrumental color and lipid oxidation (TBARS) were performed at 1, 30, 60, 90 and 120 days of storage. All samples showed physical-chemical and microbiological tests in accordance with the Brazilian legislation. pH measurements were between 5.48 and 5.90; however, the intensity of red has changed according to the treatments and storage periods. The addition of Moringa leaves flour had no antioxidant effect on burgers, but its inclusion not only contributed to the improvement of nutritional quality, but also did not harm product acceptance.

Eletro narcose como método de insensibilização para a tilápia do Nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Utilização do sistema de bioflocos na larvicultura de Tilápia-do-Nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do manejo pré-abate de bovinos no bem–estar e qualidade da carcaça

Pós-graduação em Zootecnia - FCAV

Obtenção de massa de mandioca com adição de maltodextrina de amido de milho waxy

This study aimed to the development of cassava mashed with added maltodextrin of waxy maize starch as an alternative to the semi-ready product. The experimental design was completely randomized using blocks in 4x7 factorial, with three replications. The treatments were the combination of maltodextrin concentrations added in the cassava mass (0, 5, 10 and 15% on dry weight) with storage time (0, 2, 4, 6, 8, 10 and 12 days after preparation) and two condition (environment and refrigerated temperature). The variety chosen to the processing was the IAC 576-70. The data were subjected to variance analysis. The means were compared by Tukey test at 5%. The content of maltodextrin from waxy maize starch to 15% was effective in controlling the increase of texture. The mass of cassava with the addition of maltodextrin showed to be product of easy preparation, showin IAC 576-70g viability to be produced in industrial scale.

Influence of storage period of pieces in stiffness of pinus elliottii Glulam Beams

This study aimed to investigate the influence of storage time (0, 48 hours) of Pinus elliottii pieces and the tests to obtaining modulus of elasticity (static bending and transversal vibration) in glued laminated timber beams, produced with resorcinol based adhesive and 0.8 MPa compaction pressure. After pieces were properly prepared, part of them was used in immediate three manufacturing glulam beams, tested after adhesive cure, and part stored for 48 hours under a roof with a temperature of 25°C and relative humidity of 60% for subsequent manufacturing and testing three other glulam beams. Results of analysis of variance (ANOVA) revealed that the storage period was significant influence in modulus of elasticity obtained in static bending test (8% reduction from 0 to 48 hours). This not occurred with modulus of elasticity obtained by transversal vibration test (no significant influence). ANOVA results showed equivalence of means in both test procedures. New researches ire needed to better understand the investigated phenomenon, using new wood species, other storage conditions and a great number of samples.

Duração da qualidade de ovos estocados de poedeiras criadas no sistema “cage-free”

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)