Variação genética para caracteres silviculturais e anatômicos da madeira em progênies de Myracrodruon urundeuva (Engler) Fr. Allem

The aims of this study were to evaluate the variation and to estimate genetic parameters for silvicultural anatomic wood traits for genetic breeding of a Myracrodruon urundeuva (Engler) Fr. Allem, population from Selvíria-MS. For this, from samples of a progeny test established in the Fazenda de Ensino, Pesquisa e Extensão da Faculdade de Engenharia de Ilha Solteira/UNESP, macroscopic anatomic wood traits of M. urundeuva (tangential diameter and vases frequency per mm2) and growth traits were measured (height, DBH and stem form). Genetic parameters were estimated in 28 open-pollinated progenies, in three replications and 10 plants per plot, using a REML/BLUP approach. Between the analysed traits, the DBH is the most indicated for selection for timber production, because it presented the highest values of coefficient of genetic variation, heritabilities and selective accuracy. Between the anatomic traits, the vessels frequency in the pith showed the highest values for genetic parameters. For pulp yield, based on the multi-effect index, the strategy of selecting the best trees for vessels frequency in the pith, independent of the progeny, permitted to obtain substantial gains by mass selection, without progeny test.

Influência do cancro basal em Eucalyptus grandis nas propriedades da madeira e polpação kraft

The objective of this research is to assess the influences of basal canker on wood properties for the kraft pulp production. The material consisted of seeded E. grandis trees classified into 4 levels of basal canker severity (0, 1, 2 and 3) and installed in three soil types classified by texture (AQ1 and AQ2 - 10 to 15% clay, and LEm2 - 26 to 35 clay). The sampling consisted of randomly selecting five trees for each for each canker severity level and soil type, totaling 60 trees (4 canker levels x 3 soil types x 5 trees). These trees were fallen and cut into sections at 0, 25, 50, 75 and 100% of the commercial height for the collection of disk and logs of wood. The results showed that the soil texture influences in the Eucalyptus canker severity and this fact should be considered when assessing the wood properties and their final destination. The texture of the soil and the severe levels of basal canker influence the wood properties, and therefore the kraft pulping.

Utilização de resíduos e derivados de madeira para confecção de uma guitarra elétrica

The residues generation is a quite serious problem in several industrial areas and also in the lumbering area. The search for the elimination or reduction of the volume of generated residues is endless, however limited, resulting in the search for a proper destination or better use, instead of simply burning it. A lot of uses and services are commonly proposed, but with low aggregated value to the residue. This work shows the usage viability of different discarded residues and wood composites in the production of an electric guitar. Cupiúba, ipê and jatobá residues have been used besides wood composites of pinus. The residues and wood composites have shown appropriate resistance, surfacing quality and design terms, and could be used to substitute the traditionally wood used in the production of the instrument as well as in other products of similar characteristics and with larger aggregated value.

Influência da irrigação, da densidade de plantio e da adubação nitrogenada nas características morfogênicas, estruturais e de produção do capim-tanzânia

This experiment was carried out to evaluate canopy height of guinea grass with 95% of photosynthetic active radiation interception and quantify the nitrogen fertilization influence and plants' density on the morphogenesis and structural characteristics of Tanzania grass. Four doses of N (0, 80, 160 e 320 kg.ha -1), were arranged with three plant densities (9, 25 and 49 plants.m -2), according to 4 × 3 completely randomized design, with three repetitions. Total dry matter (DM) accumulation throughout the experimental period was influenced by nitrogen fertilization and plants' density. In the rainy period, the higher nitrogen fertilization decreased the harvesting intervals, and consequently, increased the number of harvests. The rate of leaf appearance and the phyllochron were influenced only under nitrogen fertilization in the transition period of rainy and dry weather. Tanzania grass canopy height under 95% of light interception was positively influenced because of the plant densities in rainy period and transition period between rainy/drought and drought. Tanzania grass height under 95% of light interception presented variations along the evaluations and the values were higher (near 70 cm) in the rainy period, followed by transition period rain/drought and drought. © 2011 Sociedade Brasileira de Zootecnia.

Efeito da densidade de semeadura e de reguladores vegetais sobre os caracteres morfofisiológicos da folha bandeira do trigo

The objective of this work was to study the morphological and physiological characteristics of the wheat flag leaf as affected by increasing sowing densities and plant growth regulators application. The experimental design was a split-plot with completely randomized blocks and four replications. Plots were consisted by four sowing densities (30, 50 70 and 90 plants m-1) and the split-plots by plant growth regulators: a product composed by auxin+gebberellin+cytokinin (Ax+GA+CK), Trinexapac-Ethyl e (Ax+GA+CK) + Trinexapac-Ethyl, and a control without application. Dry mass accumulation, plant height, morphological characteristics, SPAD index, nitrogen and photosynthetic pigments contents in the flag leaf were determined. The increase in the sowing density resulted in lower dry mass accumulation and SPAD index of the flag leaves. Trinexapac-Ethyl caused increase in the SPAD index, but the chlorophyll content of the flag leaf was reduced. The SPAD index values were more correlated with the nitrogen than the chlorophyll contents. Ax+GA+CK did not affect flag leaf characteristics in wheat plants.

Classificação Estrutural e Qualidade da Madeira do Clone GT 1 de Hevea brasiliensis Muell. Arg

Latex is the main product extracted from rubber trees (Hevea brasiliensis). In Brazil, at the end of the production cycle of latex, the wood of rubber tree is traditionally used for energy purposes, but several international studies have reported consolidated practices of adding value to it. The objective of this paper was to evaluate the quality of wood and classify it structurally based on its mechanical properties. Six 20-year-old trees of the clone GT 1 of rubber tree proceeding from Itajobi, State of Sao Paulo, Brazil were sampled. Reduced dimensions specimens in the radial direction of the wood were produced to evaluate the quality by compression parallel to the grain, static bending and Janka hardness tests. Two specimens, one from the lower log (since the ground up to breast height) and one from the higher log (from breast height up to 2.50 m) were produced for structural classification of the wood based on the characteristic strength in compression parallel to the grain (NBR 7190 norm, 1997). The wood was classified as C40 (fc0k ≥ 40 MPa) class. Results revealed that the strength was not statistically different in the radial direction (except for the Janka hardness), though tending to increase from pith to bark.

Determinação da densidade mineral e da elasticidade óssea após a aplicação de ondas de choque extracorpóreas no terceiro metacarpiano de equinos atletas

The porpoise of this study was to evaluate the effects of extracorporeal shock waves in third metacarpus bone from healthy horses by determination of bone elasticity. It were used 20 Thoroughbred horses, male and female, with two years old, on top of training and selected as the state healthy. At the beginning of the experiment (D0), all animals were submitted for evaluation of bone elasticity held in the third metacarpus bone. The animals were divided into two groups (Control Group - CG and Experimental Group - EG). The application of extracorporeal shock wave therapy (ESWT) was performed on the right forelimb of the animals in the experimental group in the same place evaluated for bone elasticity and was used apparatus for extracorporeal therapy of waves with 0.15 mJ/mm2 energy flux density and 2000 pulses with E6R20 probe, with focus feature of the shock wave of 20 mm. The ESWT were repeated every 21 days, a total of three sessions (D0, D21 and D42). The analysis of bone elasticity determination was realized at D21, D42 and D72. The average of speed ultrasound differed between groups at D21, D42 and D72, and the animals from EG had lower bone mineral density after applications of ESWT. There was also difference in the analysis of bone mass (Z-Score) between the groups at D21 and D42, which animals from EG showed a significant decrease in bone mass. The risk of fracture was higher in animals from experimental group at D21. It was concluded that ESWT is able to promote change in bone mineral density.

Densidade de Enterococcus sp em águas recreacionais e areias de praias do município de São Vicente-SP, Brasil e sua relação com parâmetros abióticos

Coastal cities attract a large number of tourists for their beautiful landscape and recreational activities, increasing the municipalities' income source. Thus, a need is clear for the establishment of beach quality monitoring programs to ensure bathers health. Although there is an effective monitoring program for recreational waters in Brazil there are no programs to certify the quality of beach sands. In this sense, the aim of this work was to analyze the density of bacteria from the genus Enterococcus in both sand and water from two beaches from São Vicente, São Paulo (Brazil) and correlate these densities to abiotic parameters such as: temperature, salinity, particle size, organic matter and tides). Water and sand samples were collected during February 2006 on the beaches of Gonzaguinha e Ilha Porchat and bacterial densities were determined by membrane filter technique. Temperature and salinity were measured in situ with a thermometer and a refractometer while particle size and organic matter were determined according to methods described by Suguio and Dean. There were significant differences between densities found in water and sand (p=0.004), being approximately 20 times higher in Gonzaguinha's beach sands. Similar results were found for Ilha Porchat beach samples, being the densities found in sand 3 times greater than those found in water. Both beaches showed a negative correlation between bacterial densities and salinity and temperature, suggesting a deleterious effect of these parameters on the bacterial community. On the other hand, no correlation was found between organic matter and particle size and bacterial densities. This work demonstrates that there is a great necessity for monitoring beach sand since the evaluation of beach quality is an important part of integrated coastal management programs.

Alterações da densidade mineral óssea em vértebras de ratos wistar submetidos à ausência de carga nos membros pélvicos

The suspension of rats by the tail model is used to investigate the behavior of bone in animals unable to move around. Bone is an adaptative tissue that develops in structure and function, among other factors, in response to mechanical forces applied to it and metabolic demands that it will suffer. The absence of mechanical forces and deformation of bone that occurs causes a decrease in calcium deposition in the absence of stimuli on osteoblasts and osteocytes, favoring the action of osteoclasts, making bones weak and brittle. Therefore, the mechanical action is necessary to stimulate local bone response and thus provide growth and remodeling. The aim of this study was to evaluable by radiographic densitometry, the tail suspension for 15 and 36 days alter the bone mineral density of cervical vertebrae (C3), thoracic (T6) and lumbar (L1 and L3) of Wistar rats. Thirty Rattus norvegicus albinus, adult, male, Wistar strain, average body mass ± 350g, were divided into 3 groups: control (n = 10) - not suspended; S15 (n = 10) - suspended for 15 days and S36 (n = 10) - suspended for 36 days. For densitometric analysis vertebrae were radiographed, scanned, digitized and analyzed by the computer program ImageJ®. There was a statistically significant increase in bone mineral density in group S15, probably by the restlessness of the animals to the suspension, with a decrease in group S36, and this hypothetically is linked to the accommodation of the rats, concluding that the tail suspension altered bone mineral density in first time with a decrease over time.

Densidade populacional de pratylenchus spp. em pastagens de brachiaria spp. e sua influência na disponibilidade e na qualidade da forragem

The aim of this work was to evaluate the population density of Pratylenchus brachyurus and Pratylenchus zeae associated with Brachiaria brizantha, B. decumbens and B. humidicola and their influence on forage availability and quality. The experiment was conducte in the Hisaeda Farm, Terenos, MS, Brazil. Soil, roots and plant aerial part were harvest with ten replications each, in one square meter randomized sets encompassing three treatments: Good, Intermediary and Bad, visually characterized, considering the percentage of green material. P. brachyurus and P. zeae density were evaluated in soil and plant roots. Dry matter of green, dead and re-growth materials, plant nutritional status and forage quality were assessed in the aerial plant part. Soil fertility was determined in all harvested samples. Both nematode species were identified from all samples, with a larger numbe in the roots (between 87-311 P. brachyurus and 1-61 P. zeae.10 g-1) than in the soil (0-8 P. brachyurus and 1-39 P. zeae.200 cm-3), however, no significant differences were found in the number of specimens between treatments. Considering that these forage species are perennial and host Pratylenchus spp, there is a tendency to increase the population of these pathogens over time, becoming a serious phytosanitary problem.

Painéis de partículas de madeira leucena e resina poliuretana derivada de óleo de mamona

This research aimed to test particleboard with leucena (Leucaena leucocephala) wood particles and polyurethane resin castor oil based. The response variables are: modulus of rupture (MOR), internal adhesion (AI), apparent density (dap) and wood moisture content (um). The experiments were developed based on the methodological procedures of the ABNT NBR 14810:2002 standard. The particleboards were manufactured by hot-pressing at 4MPa and 90°C, using timber particles with 5% of moisture content and 10% of monocomponent and bicomponent polyurethane resin. The higher moisture content was achieved when the monocomponent polyurethane resin was used. The bicomponent polyurethane resin provided a percent increase of 43.7% and 22.7% on the modulus of rupture and apparent density, respectively, when compared to the standard limit. The internal adhesion of the panels manufactured with monocomponent resin was 2.45 times higher than the standard limit. The confidence interval between means revealed that the internal adhesion and apparent density exhibited statistical equivalence. A good correlation between the internal adhesion and apparent density was found, for this reason it was possible to estimate the internal adhesion of the panels based on the apparent density data.

Densidade e época de semeadura de duas espécies de Brachiaria sobre a cultura da soja

The aim of this study was to evaluate the growth and yield of soybean cultivar M-8766 in consortium with Brachiaria brizantha. BRS Piata and Brachiaria ruziziensis at different densities and sowing dates. The experimental design was randomized blocks with treatments arranged in a factorial 2 × 2 × 3 with four replications. Used as factors grass species (Brachiaria brizantha Piata and Brachiaria ruziziensis BRS) intercropped with soybean M-8766, sowing dates (12 and 24 days after soybean emergence) and three seeding rates (0, 5, 10 kg ha-1 of seed). At 71 days after soybean emergence were evaluated plant height, stem diameter, dry mass of leaves, stems and shoots, and 4 months after sowing determined the weight of 100 grains and soybean yield. The results showed that when seeded at a density of 10 kg ha-1 at 12 and 24 DAE soy, Brachiaria brizantha. BRS Piata caused reduction in yield in the order of 6.71% and 3.03% respectively, while the Brachiaria ruziziensis was one that caused a greater reduction in productivity in the order of 13.42 and 16.23%, respectively, of these values expression when considering the price of soybean sack. B. ruziziensis expressed less competitive with soybean. However, the large biomass production of this grass provides deployment system till the next harvest.

Métodos não convencionais para avaliação da porosidade e da densidade do solo de um latossolo vermelho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comportamento produtivo do trigo em função da densidade de semeadura e da aplicação de reguladores vegetais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da alimentação e densidade de estocagem no desempenho zootécnico e perfil celular do hepatopâncreas do camarão-da-amazônia Macrobrachium amazonicum (Heller, 1862) (Crustacea, Palaemonidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)