Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

RAPD analysis of the sexual state and sterile mycelium of the fungus cultivated by the leaf-cutting ant Acromyrmex hispidus fallax

That the symbiotic fungus of leaf-cutting ants only occasionally produces the sexual phase makes their identification confusing. This has occurred so rarely, either in laboratory nests, or in unbalanced field nests. that the possibility of contamination of the fungal garden by other fungi cannot be disregarded. In this paper we describe the formation of several basidiomata in a healthy and free-living nest of the leaf-cutting ant Acromyrmex hispidus fallax. The cultivation in vitro of the sterile mycelia (isolated from the fungal garden) with their typical inflated tips, and the similarity of both forms confirmed by RAPD analysis of their genomic DNA. The fungus was identified as Leucoagaricus gongylophorus.

Effect of the passive recovery period on the lactate minimum speed in sprinters and endurance runners

The objective of this study was to verify the effect of the passive recovery time following a supramaximal sprint exercise and the incremental exercise test on the lactate minimum speed (LMS). Thirteen sprinters and 12 endurance runners performed the following tests: 1) a maximal 500 m sprint followed by a passive recovery to determine the time to reach the peak blood lactate concentration; 2) after the maximal 500 m sprint, the athletes rested eight mins, and then performed 6 x 800 m incremental test, in order to determine the speed corresponding to the lower blood lactate concentration (LMS1) and; 3) identical procedures of the LMS1, differing only in the passive rest time, that was performed in accordance with the time to peak lactate (LMS2). The time (min) to reach the peak blood lactate concentration was significantly higher in the sprinters (12.76+/-2.83) than in the endurance runners (10.25+/-3.01). There was no significant difference between LMS1 and LMS2, for both endurance (285.7+/-19.9; 283.9+/-17.8 m/min; r= 0.96) and sprint runners (238.0+/-14.1; 239.4+/-13.9 m/min; r= 0.93), respectively. We can conclude that the LMS is not influenced by a passive recovery period longer than eight mins (adjusted according with the time to peak blood lactate), although blood lactate concentration may differ at this speed. The predominant type of training (aerobic or anaerobic) of the athletes does not seem to influence the phenomenon previously described.

Age polyethism in the leaf-cutting ant Acromyrmex subterraneus brunneus Forel, 1911 (Hym., Formicidae)

This study describes and quantifies the behavioural acts of two laboratory colonies of Acromyrmex subterraneus brunneus by investigating worker age polyethism. Twenty-nine behavioural acts were recorded during the 19-week observation period. Young individuals performed tasks inside the nest related to brood care and care for the fungus garden, whereas older individuals performed activities outside the nest such as foraging and activities in the waste chamber. The average longevity (+/- SD) was 108.21 +/- 3.30, 109.15 +/- 1.92 and 122.71 +/- 1.55 days for large, medium and small workers, respectively. The small-sized workers presented a higher probability of reaching older age than large- and medium-sized workers. This study describes task switching according to age polyethism and the relationship of physical and temporal subcastes.

Bond strength of resin modified glass ionomer cement to primary dentin after cutting with different bur types and dentin conditioning

The aim of this in vitro study was to evaluate the effect of different bur types and acid etching protocols on the shear bond strength (SBS) of a resin modified glass ionomer cement (RM-GIC) to primary dentin. Forty-eight clinically sound human primary molars were selected and randomly assigned to four groups (n=12). In G1, the lingual surface of the teeth was cut with a carbide bur until a 2.0-mm-diameter dentin area was exposed, followed by the application of RM-GIC (Vitremer - 3M/ESPE) prepared according to the manufacturer's instructions. The specimens of G2, received the same treatment of G1, however the dentin was conditioned with phosphoric acid. In groups G3 and G4 the same procedures of G1 and G2 were conducted respectively, nevertheless dentin cutting was made with a diamond bur. The specimens were stored in distilled water at 37 degrees C for 24h, and then tested in a universal testing machine. SBS. data were submitted to 2-way ANOVA (= 5%) and indicated that SBS values of RM-GIC bonded to primary dentin cut with different burs were not statistically different, but the specimens that were conditioned with phosphoric acid presented SBS values significantly higher that those without conditioning. To observe micromorphologic characteristics of the effects of dentin surface cut by diamond or carbide rotary instruments and conditioners treatment, some specimens were examined by scanning electron microscopy. Smear layer was present in all specimens regardless of the type of rotary instrument used for dentin cutting, and specimens etched with phosphoric acid presented more effective removal of smear layer. It was concluded that SBS of a RM-GIC to primary dentin was affected by the acid conditioning but the bur type had no influence.

THE POPULATION STATUS OF THE ENDANGERED BRAZILIAN ENDEMIC LEAF-CUTTING ANT ATTA-ROBUSTA (HYMENOPTERA, FORMICIDAE)

The population status of the endemic leaf-cutting ant Atta robusta was assessed using extensive field surveys. In the coastal plain of the state of Rio de Janeiro, we found localized populations of A. robusta, bur no evidence of population recruitment. In disturbed habitats, A. robusta is apparently being displaced by Atta sexdens rubropilosa.

Toxicity of lignans to symbiotic fungus of leaf-cutting ants

Lignans from Virola sebifera Aubl., Virola sp., and Otoba parvifolia (Mkfg.) A. Gentry (Myristicaceae) inhibited the in vitro growth of the fungus cultivated by leaf-cutting ants of the species Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae). A comparison of activity among the lignans was obtained.

Yeasts associated with nests of the leaf-cutting ant Atta sexdens rubropilosa Forel, 1908

A total of 137 yeasts associated with the leaf-cutting ant Atta sexdens rubropilosa Forel, 1908 were characterized, being selected 93 for analysis. Twenty four species belonging to seven genera(Candida, Cryptococcus, Rhodotorula, Sporobolomyces, Tremella, Trichosporon, Pichia) were isolated from the different analysed material. The genus Candida was widely distributed, with C. homilentoma, C. colliculosa-like, C. famata and C. colliculosa being the most prevalent. A few isolates did not fit the standard descriptions and probably some of them could be new biotypes or even new species. Three strains of black yeasts were also isolated, and four others were identified as being Candida spp. The effective number of yeast species was higher in newer sponge. The origin, distribution and relative importance of these microorganisms for the ants are discussed.

Refuse production in leaf-cutting ants (Hymenoptera: Formicidae) and its relationship with leaf harvest

We examined the relationship between fungal refuse production and vegetation input in a laboratory colony of the leaf-cutting ant Acromyrmex coronatus. We found only a strong 6-day time-delay in the production of refuse with variation in substrate intake.

GROWTH OF OOCYTE AND NURSE CHAMBER DURING OOGENESIS IN QUEENS OF THE LEAF-CUTTING ANT ATTA SEXDENS RUBROPILOSA FOREL, 1908 (HYM, FORMICIDAE)

Volume changes of the vitellarium components of the leaf-cutting ant Atta sexdens rubropilosa are reported. The oocyte grew to approximately 409 times of its initial volume and reached a maximum value of 1.2 x 10(7) mu m(3). The follicle increase in size at a more or less constant rate up to the 12(th), showing an elevated growth rate thereafter. The mean number of follicles per ovariole was 16.42 +/- 3.58.

Pulpal temperature increases with Er : YAG laser and high-speed handpieces

Statement of problem. During tooth preparation, both high-speed handpieces and lasers generate heat, which, if not controlled, can cause pulpal necrosis.Purpose. The aim of this study was to compare temperature increases produced by a high-speed dental handpiece with those produced by a relatively new instrument, the Er:YAG (erbium: yttrium-aluminum-garnet) laser.Material and methods. Thirty bovine mandibular incisors were reduced to an enamel/dentin thickness of 2.5 mm. Class V preparations were completed to a depth of 2.0 mm, measured with a caliper or by a mark oil the burs. A thermocouple was placed inside the pulp chamber to determine temperature increases (degreesC). Analysis was performed on the following groups (n = 10): Group 1, high-speed handpiece without water cooling, Group 11, high-speed handpiece with water cooling (30 mL/min), and Group III, the noncontact Er:YAG laser (2.94 mum at 350 mJ/10 Hz) with water cooling (4.5 mL/min). The temperature increases were recorded by a computer linked to the thermocouples. The data were analyzed using the Kruskal-Wallis test. The Dunn multiple comparison test was used as post hoc test (alpha = .05).Results. The average temperature rises were: 11.64degreesC (+/-4.35) for Group 1, 0.96degreesC (+/-0.71) for Group 11, and 2.69degreesC (+/-1.12) for Group III. There were no statistical differences between Groups 11 and III, both 11 and III differed from Group I significantly (P = .000 and P = .002, respectively).Conclusion. The preparations made with the high-speed and the laser instrument generated similar heat increases under water cooling. Water cooling was essential to avoid destructive temperature increases when using both the high-speed handpiece and laser.

The validity of critical speed determined from track cycling for identification of the maximal lactate steady state

The objective of this study was to determine the critical speed (CS) for track cycling and to assess whether a lactate steady state occurs at this speed. Fourteen competitive cyclists performed the following tests on an official cycling track (333.3 m): 1) incremental test for determination of the intensity corresponding to 4 mM of blood lactate (onset of blood lactate accumulation, OBLA) and maximal oxygen uptake (VO(2)max); 2) CS: 3 maximal bouts for distances of 2, 4 and 6 km executed in random order and with a period of recovery of 40 to 50 min between bouts. CS was determined for each subject from the linear regression between the distance and the time taking to cycle it; 3) Endurance test in which subjects were instructed to pedal at 100% of their individually determined CS for 30 min. At the 10(th) and 30(th) min (or upon exhaustion), 25 mul of blood were collected from ear lobe for later analysis of blood lactate [Lac]b. An increase less than or equal to1 mM between 10 and 30 min of exercise was considered as the criterion for the occurrence of the lactate steady state. CS (49.6 +/- 8.6 ml.kg(-1).min(-1); 36.9 +/- 2.7 km.h(-1)) was significantly higher than OBLA (43.7 8.0 ml.kg(-1).min(-1); 35.24 +/- 2.6 km.h(-1)) although the two parameters were highly correlated (r=0.97). During the endurance test, only 8 of the 14 subjects completed the 30 min period at CS. of these 8 subjects, only 2 presented a lactate steady state. Time to exhaustion at CS was 20.3 +/- 1.6 min for the remaining 6 subjects. The 12 subjects who did not reach a lactate steady state presented mean [Lac]b values of 7.4 +/- 1.3 mM at 10 min and of 9.4 +/- 1.9 mM at the end of the test (exhaustion), characterizing an exercise intensity of high lactacidemia. on the basis of the present results, we can conclude that CS determined by a track cycling test seems to overestimate the intensity of the maximal lactate steady state for most subjects.

Sex allocation in the polydomous leaf-cutting ant Acromyrmex balzani

Logistic regression analysis was used to analyse sex allocation in a population of the leaf-cutting ant Acromyrmex balzani occurring in a pasture in southern Brazil. The field sample consisted of 151 fungus-garden chambers (18 queenright and 133 queenless), belonging to 50 nests with three vertically stacked chambers per nest on average. Taking nest chamber as the unit of analysis, seven predictor variables were considered: sampling date, chamber depth, chamber volume, weight of fungus garden, presence of a queen, number of large workers, and number of small to medium workers. The population-level numerical proportion of females was 0.548 and the inferred proportional energetic investment in females 0.672. The former was not significantly different from 0.5 (P=0.168), but the latter was (P=0.0003). The proportional investment in females per fungus garden increased with the number of large workers present (P=0.0002) and decreased with the dry weight of the fungus garden (P=0.012). This implies that resource acquisition through foraging is likely to be a major proximate determinant of sex allocation. The negative correlation between female bias and fungus garden weight might be due to developing adult females requiring more food than males, but this hypothesis could not be confirmed by direct statistical evidence.