Componentes agronômicos e índices fisiológicos da mandioca correlacionados ao preparo do solo

Pós-graduação em Agronomia (Agricultura) - FCA

Análise experimental e desenvolvimento de um modelo numérico simplificado para um trocador de calor compacto para resfriamento de componentes eletrônicos

Pós-graduação em Engenharia Mecânica - FEIS

Estudo comparativo de dois programas de computador (Dolphin Imaging e Nemotec) versus o método manual utilizados para análises cefalométricas de pacientes com deformidade dento-facial padrão II

A-Nperp, Pg-Nperp e mandibular plane). Thirty patients (male or female), with age varying from 19 to 48 years old were analyzed. All patients were diagnosted with mandibular retrognathism and submitted to bilateral sagital mandibular advancement. All tracings were performed in lateral cephalometric radiographs obtained one week before surgery. The intraclass correlation coefficient analysis (ICC), the t test adjusted for Tukey-Kramer test and Schuirmann test were applied. The results showed that the manual tracings and Nemotec® tracing had excellent reliabilities for all measures (ICC > 0.98). The Dolphin Imaging® showed low reliability in anterior facial height (value of ICC = 0.70), Co-A (value of ICC = 0.47) and Co-Gn (ICC value = 0.49). In A-Nperp, Pg-Nperp, Mandibular plan, SNA and SNB there were no differences between the 3 tracings (p > 0.05), for the anterior facial height measures differences were found between the Dolphin Imaging® and Nemotec® tracings, but no differences were observed as compared to the manual tracing (p > 0.05), in Co-A and Co-Gn measures t Dolphin Imaging® presented a significantly lower mean than the other methods (p > 0.05). The manual tracings were equivalent in 6 of 8 measures (A-Nperp, Pg-Nperp, md Plan, SNA, SNB and Co-A), there was no equivalence between the methods in the anterior facial height and Co-Gn measures (p < 0.01). The Dolphin Imaging® method was not equivalent in any of the 8 measures. It was concluded that in the manual tracing only the Co- Gn, Pg-Nperp and SNB measures confirmed the diagnosis of mandibular retrognathism, and the Nemotec® software showed better results than the Dolphin Imaging® software.

Efeito do nível e da época de desfolha artificial sobre os componentes de produtividade de cultivares de algodoeiro

The periodic substitution of cotton cultivars for the farms can modify the levels of economic damages and control of pests, compromising the success in pest control. The objective of this work was to evaluate the effect of simulated defoliation levels in cotton cultivars actually used. The assay was carried out in experimental area of the Polo Apta Centro Norte, in Pindorama, Sao Paulo state. There were evaluated four defoliations levels (0%, 36.8%, 62.1% e 100%), done at a unique operation, in tree times (30, 60 and 90 days after plant emergence) and four cotton cultivars (IAC-25, DeltaOpal, Fibermax 966 and Fibermax 993). The defoliation was done with a scissor simulating the caterpillar damage. Evaluations included the number of open bolls, weight of one boll and 100 seeds, fiber percentage and productivity (kg ha(-1)). The defoliation negatively affected all components of agronomic traits, with the exception of percentage of fiber. The most damaging levels were 62.1 and 100% removal of the leaf blade. The period of higher susceptibility to defoliation occurs from 30 to 60 days after plant emergence.

Componentes de produção e morfologia de raízes de mandioca sob diferentes preparos do solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Computador: um recurso para o incentivo da leitura nos anos iniciais do ensino fundamental

A presente reflexão motiva-se no seio da crescente discussão sobre a utilização das tecnologias de informação e comunicação na educação, assim como acerca do uso de computadores que permitem o acesso à pesquisa e a informações novas. Este trabalho é decorrência de estudos realizados para a disciplina de monografia de conclusão de curso, e tem como objetivos: verificar o posicionamento de professores sobre o uso do computador como um recurso que estimule a leitura para alunos dos Anos Iniciais do Ensino Fundamental; averiguar o que os professores pensam sobre a inclusão digital; descobrir para qual tipo de leitura o computador é utilizado. Os resultados apresentados são provenientes apenas dos estudos teóricos realizados, visto que fazem parte de um projeto de pesquisa ainda em andamento.

Deep learning architecture for gesture recognition

Pós-graduação em Engenharia Mecânica - FEG

Análise de corrosão, dureza e fratura de conjuntos implantes / componentes protético de Titânio c.p., após serem submetidos a ciclos de fadiga em um meio fluoretado com diferentes PH

Atualmente o titânio é empregado como biomaterial devido à sua biocompatibilidade e resistência à corrosão. Entretanto, íons fluoretos, freqüentemente empregados em dentifrícios bucais, podem interferir no processo de corrosão. O objetivo deste estudo foi analisar a influência de um meio fluoretado com diferentes pH nas propriedades mecânicas e na resistência à corrosão dos conjuntos implantes/componentes protéticos à base de Ti c.p., a partir dos testes de fadiga, microscopia eletrônica de varredura (MEV) e dureza. Foram simulados cinco anos de uso regular de meios de higiene oral com conteúdo de 1500 ppm de NaF, com dois diferentes pH, 7,4 e 5,3, mediante imersão das amostras nesses meios durante 184 horas e também em água destilada, grupo controle. As amostras foram testadas num durômetro Micromet 2001 (500gf/30s). Os dados dos testes de dureza foram analisados pelo teste de Wilcoxon, demonstrando que as amostras sofreram influência negativa na dureza após a ação dos íons fluoreto. Entretanto, essa influência não ocorreu nos testes de fadiga realizados em uma máquina de ensaios mecânicos MTS-810, fixada a 100.000 ciclos, 15Hz e programada com força de fadiga a 150 N. Pela análise de MEV foram constatadas evidências de corrosão na superfície das amostras após ação de íons fluoretos, entretanto pelo EDS não se verificou incorporação de íons fluoretos sobre a superfície dos conjuntos. Concluiu-se que a concentração de flúor e o pH das soluções não exerceram influência nas propriedades mecânicas.

Componentes produtivos do trigo afetados pela densidade de semeadura e aplicação de regulador vegetal

Improvement on yield potential of plants by crop management is the main research challenge due to the growing of food demand worldwide. The objective of this work was to study physiological and morphological traits and its relationship with yield components and yield of wheat as affected by sowing densities and plant growth regulators. The experimental design was a split-plot design with four replications. The plots were consisted by four sowing densities ( 30, 50 70 and 90 plants m(-1)) and the subplots were consisted by plant growth regulators [control, (IBA+GA+KT), Trinexapac-Ethyl e (IBA+GA+KT) + Trinexapac-Ethyl]. Dry matter accumulation, plant height, source-sink distance, gas exchange and yield were determined. Trinexapac-Ethyl application resulted in decreasing of plant height, source-sink distance and flag leaf length; however, the grain yield was not affected. The number of plants per unit area affected dry matter accumulation. Higher dry matter accumulation showed direct relationship with yield and yield components in lower plant densities.

Efeito da época e sistema de semeadura da Brachiaria brizantha em consórcio com o milho, sobre os componentes de produção e propriedades físicas do solo

The objective of this study was to evaluate the development of Brachiaria brizantha- MG-4; sown in two seasons and two seeding systems in space between two rows, and to evaluate the effect of intercropping on maize yield, as well as evaluating the physical properties of the soil after the consortium. The experiment was conducted in the agricultural year 2010, the Municipality of Quatro Pontes/PR. The experimental design was randomized blocks as a factorial 2x2, and an additional treatment that was corn cultivation single, with four replications. The treatments consisted two intercropping systems: corn intercropped with Brachiaria brizantha in the row, and corn intercropped with Brachiaria brizantha in space between two rows, and two times of sowing Brachiaria brizantha: simultaneously corn, and twenty-five days after sowing corn. The seed was planted mechanically in no-tillage system, with spacing between the lines of 0,70 m. The ears were harvested by hand and in the laboratory were evaluated: yield components and productivity. Brachiaria brizantha- MG-4 was sown and harvested manually. We evaluated the production of fresh and dry mass and yield components. For soil analyzes the soil was sampled at 0-0.10 and 0,10-0,20 m. Were determined the total porosity, macroporosity and microporosity. The results demonstrated that the production components of Brachiaria brizantha were lower when it was sown twenty-five days after sowing corn, and between sowing systems when Brachiaria brizantha was sown in line. There was no reduction in grain yield of maize intercropped with Brachiaria system independent and sowing date. The consortium of pasture with corn increased the total porosity, and reduced soil bulk density.

Análise de componentes principais para características de crescimento em bovinos de corte

The objetive of this research was to study the relation among body weight and average daily gain in different ages, using principal components analysis. Data on 1663 birth weight (BW), weaning weight adjusted to 230 days (WW), yearling weight adjusted to 365 days (YW), long yearling weight adjusted to 550 days (LYW), average daily gain from birth to weaning (AGW), average daily gain from weaning to 365 days (AGY) and average daily gain from 365 days weight to 550 day weight (AGL) from crossbred animals, and data on 320 observations of the same traits from straightbreed Nellore animals were analysed. The model included the fixed effects of breed (only crossbred data), contemporary group, and linear and quadratic effects of age at calving. For body weight in different ages, the first principal component contrasted heavier and light animals after birth and explained about 79,0% and 78,0% of the variation for data on crossbred and Nellore animals, respectively. The second principal component compared heavier animals at weaning and yearling weight those at long yearling weight. It explained around 13,5% and 15,5% of the total variation, respectively, for data on F1 and Nellore breed. The major source of variation among animals on the two data set for body weight was due to differences in weight followed by differences in the ages they got those weight. For the traits expressed as average daily gain, the variation among animals was due to differences in birth season, the first principal component explaining about 52,0% of the variation on crossbred animals. This component compared animal with higher AGY with those with higher AGW and AGL. For data on Nellore breed, the first component explain about 56,0% of the total variation and also compared animals with higher AGY with those with higher AGW and AGL.

Desempenho e digestibilidade de componentes nutritivos de dietas contendo subprodutos de leaginosas na alimentação de cordeiros

The aim of this work was evaluate introduction of byproducts of oleaginous in lambs feeding. Diets were composed for 30% of Tifton hay and 70% of concentrate based on corn grain, soybean meal, soybean cake, sunflower cake and peanut cake, limestone and mineral mixture, as dites: FS - control with soybean meal, TS - soybean cake as part of the concentrate, TG sunflower cake as part of the concentrate and TA - peanut cake as part of the concentrate. For performance evaluating 24 Santa Ines lambs with initial age and weight of 70 days and 19 +/- 2 kg, according to a completely randomized design. For digestive evaluate, weight Santa Ines sheep with initial age and weight of 70 days and 16 +/- 1.2 kg, adapted to the use of bag, for collect feces. Animals were distributed in a replicated 4 x 4 Latin Square and means were compared by Tukey's test with 5% significance level. By the performance trial, duration of confinement, weight gain, fed conversion and the dry matter intake were not affected (P>0,05), with averages of 54.29 days, 259 g/day, 4.29 kg of DM/kg and 1.32 kg/day, respectively. There were no difference P>0,05) for intake DM, OM, CP, CT and CE among diets, digestibility trial with averages of 76.23; 74.47; 76.44; 41.12; 73.00 and 93.00%, respectively. There were no differences for digestibility DM, OM, CP, ADF, CT and NCF. The partial substitution of the soybean meal for byproducts of oleaginous was a good proteic alternative in the feeding of lambs.

Desenvolvimento de um computador de bordo para veículo Baja-SAE

The objective of this paper is show the development of an Eletronic Control Unit (ECU) for Baja-SAE vehicles from its requirements to final implementation. An ECU for Baja-SAE vehicles is made of electric and electronic circuits (appropriated to the hostile situations of an off-road competition) able to make important measurements for the running or stand-by vehicle performance. For this development, some concepts were studied: embedded electronics concepts (mainly microcontrollers and data acquisition circuits) and sensoring. Both the studies were made considering the off-road environment. After these initial studies, the elaboration of the basics hardware and software (under simulations) has begun, and this elaboration objectives maximum performance and low implementation cost. After the theorical studies, basic definition of the hardware and software’s architectures and simulations, the printed circuit boards (PCB) were made, as exhaustive tests in these boards for debugging and verify if the boards work well. Once the system was tested in the university, it ran into a regional Southeast competition in 2010, that definitely proved the efficiency of the whole system

Estudo do Comportamento da Viscosidade de Sistemas de Carboximetilcelulose de Sódio e Diferentes Componentes nos produtos para industria alimentícia

Currently, the food market is a great competition. It is no longer unanimously in the CMC powder drinks, as in the past, xanthan gum, always seeking to develop more economic alternatives, such as guar gum. It is clear, therefore, it is of vital importance to understand thoroughly the operation of a particular product in different process conditions and with different materials so that we can develop and adapt both new processes and products to new market reality

Transportador de correia: componentes e cálculos básicos para seu dimensionamento

Increasingly, people searches for an efficient and economic way for transporting bulk materials. Transport through belts is now the most widely used mean for transporting bulk materials, used by companies from various sectors such as mining, quarrying, agribusiness, etc. There are many advantages of using a conveyor belt as compared to rail or by truck. Trucks needs a driver, have a high risk of accidents as well as a high cost for maintenance and as well as trains, after making the downloading of the material, return empty to the next load. The cost for the construction of a railway is very high, making it often impossible. The conveyor belt have a high cost of installation, but it works 24 hours a day, 365 days a year. The upper side of the belt is always loaded, the maintenance cost is average and the risk of accidents is low, causing it to be the ideal way to transport bulk materials. This monography aims to interest the reader about what is a conveyor belt, what are its main components and demonstrate the basic calculations for their sizing and selection of components. Throughout the work, scaled a belt conveyor for use in the mining sector, but the concepts demonstrated apply to the transport of any material