Efeito de um gel de peróxido de carbamida a 10% sobre a resistência de união de restaurações adesivas à dentina

The present study aimed to analyze the effects of tooth bleaching with 10% carbamide peroxide (CP) gel on the bond strength of resin composite restorations to dentin. Material and Methods: Twenty cavities were prepared on the buccal surface of bovine teeth. After acid etching and application of bonding agent on dentin and enamel, the cavities were restored with composite resin. The specimens were divided into groups according to treatment on the surface of enamel / restoration: G1 - control (no treatment) and G2 (10% PC gel application for 8h/day during 14 days). After this period, the teeth were cut to produce beams with 0.81 mm2 cross-sectional area, which were subjected to microtensile test. The fractures were examined with a stereomicroscope and classified as cohesive in resin or dentin, adhesive, or mixed. Results: The statistical analysis (ANOVA / χ2) revealed that the factor treatment interfered with the bond strength, which was significantly higher for specimens of G2 (p <0.05). Adhesive fractures occurred in most of specimens of both groups with values ranging from 48.3% to 75%. Mixed fractures were the second more frequent in G1 and cohesive resin failure in G2. Conclusion: It was concluded that tooth bleaching with 10% of PC increased the bond strength of adhesive restorations to dentin.

Efeitos de diferentes sistemas de clareamento dental sobre a rugosidade e morfologia superficial do esmalte e de uma resina composta restauradora

The aim of this study was to evaluate and compare the roughness and superficial morphology of enamel and a composite restorative resin after different bleaching techniques application. Material and Methods: Bovine incisors were selected and standardized cavities were prepared on the buccal surface, which were restored with composite resin. The teeth were distributed according to the following treatments: G1- bleaching with 10% carbamide peroxide (CP); G2 - bleaching with 38% hydrogen peroxide (HP); and G3 - bleaching with 38% of HP associated to light irradiation. For G1, the bleaching gel was applied for 8 hours daily during 21 days. For G2 and G3, 3 sessions were performed, consisting of 3 applications of 15 minutes each, with 7 days of intervals between the sessions. For G3, the LED (470nm) light was used to activate the bleaching agent for 6 minutes. The surface of enamel and composite resin were evaluated before and after the bleaching procedures using a roughness tester and an atomic force microscope. Results: The results showed significant differences in surface roughness of enamel after bleaching only for G1 (Wilcoxon, p<0.05). For composite resin, neither group showed a statistical difference compared to control (Mann-Whitney, p>0.05). Conclusion: It was concluded that the increase in the roughness of enamel occurred only after bleaching therapy using a gel with 10% of CP. The bleaching procedures evaluated in this investigation did not increase the roughness or cause changes in the superficial morphology of the composite resin.

Análise comparativa da rugosidade superficial de resinas compostas de alta densidade

The success achieved by the use of composite resins in anterior teeth precipitately leads their use in posterior teeth. However, the indiscriminate application of these materials in cavities with several diverse sizes rapidly pointed out their lack of resistance to oclusal and proximal wear. OBJECTIVE: To evaluate the surface roughness of composite resin in relation to finishing and polishing technique. MATERIAL AND METHODS: Eight experimental groups (n = 15) were divided according to finishing and polishing technique: G1 – Z250TM composite resin without surface finishing and polishing; G2 – Z250TM composite resin plus surface finishing and polishing; G3 – P60TM composite resin without surface finishing and polishing; G4 – P60TM composite resin plus surface finishing and polishing; G5 – Prodigy CondensableTM composite resin without surface finishing and polishing; G6 – Prodigy CondensableTM composite resin plus surface finishing and polishing; G7 – SurefillTM composite resin without surface finishing and polishing; G8 – SurefillTM composite resin plus surface finishing and polishing. Three packable and one microhybrid (control group) composite resin was used. The surface roughness was measured using a profilometer at three points in each sample. The results were evaluated by ANOVA and Tukey test (p < 0.05). RESULTS: Prodigy CondensableTM composite resin showed the lowest surface roughness, while SurefillTM showed the highest surface roughness. Comparing the resins used, only between P60TM and SurefillTM there were no statistically significant differences (p > 0,05). CONCLUSION: Surface roughness was lower in all types of resin composites surfaces in contact with Mylar matrix strip than in areas submitted to finishing and polishing procedure.

Pimenta pseudocaryophyllus (Gomes) L. R. Landrum (Myrtaceae): stem and leaf anatomy of a medicinal plant

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

Energia eletrônica e polarizabilidade da mólecula de hidrogênio ionizada confinada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Confinamento das moléculas H2 e O2 como modelo para o estudo da ligação ligante-sítio ativo em macromoléculas biológicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aspectos da biologia reprodutiva da arara-azul Anodorhynchus hyacinthinus (Latham, 1790) no mosaico Carajás-PA

Pós-graduação em Ciências Biológicas (Zoologia) - IBB

Protese ocular individualizada em resina acrílica com esfera oca

The technique proposed aims at reducing the weight of individualized ample ocular prostheses using acrylic resins as well as simplifying laboratory procedure. For that, prefabricated hollow spheres made of plastic material, were inserted in the sclera. The average weights of the solid conventional sclera (5.30g) and those of the respective prefabricated plastic ones (3.91g) were compared. The weight reduction was significative with a confidence interval of 95% by the Student t test. ln addition, for illustration purpose, the technique was applied to patients in the ward of the Maxillofacial Prostheses Dicipline of the Dentistry School in the Campus of São José dos Campos - UNESP, having each patient received a solid prosthesis and a hollow prefabricated one made of plastic material. It has been concluded that the prostheses material spheres were inserted are lighter than the ones which received solid spheres; furthermore, thr technique is viable for ample anophtalmic cavities and requires few sessions

Análise da biocompatibilidade de cones de biovidro e biovitrocerâmico (Biosilicato®) em cavidade eviscerada de coelho

OBJETIVO: Avaliar experimentalmente a biocompatibilidade de cones de biovidro e biovitrocerâmico em cavidades evisceradas de coelhos. MÉTODOS: Foram utilizados 45 coelhos albinos submetidos à cirurgia de evisceração do olho direito, seguida da inclusão de cones de biovidro e dois tipos de biovitrocerâmicos (chamados de FI e FII) na cavidade escleral. Os animais foram sacrificados em três momentos (7, 90 e 180 dias). Os parâmetros avaliados foram: peso, exame clínico diário, exames bioquímicos, avaliação histológica, exame morfométrico. RESULTADOS: Os animais mantiveram-se saudáveis durante o experimento, não tendo ocorrido extrusão do implante em nenhum animal. O exame morfológico mostrou que houve a formação de pseudocápsula ao redor dos cones, com superioridade dos cones de biovidro e biovitrocerâmico FI, os quais apresentaram menor reação inflamatória e menor formação da pseudocápsula ao redor dos cones que os demais. A reação inflamatória foi mais intensa após 7 dias da colocação dos cones, diminuindo em direção aos 180 dias, sendo menos intensa nos coelhos que receberam cones de biovidro. CONCLUSÃO: Os cones de biovidro e biovitrocerâmico FI e FII podem ser úteis para a reparação da cavidade anoftálmica, com melhor resposta quando se usa cones de biovidro e de biovitrocerâmico FI.

Efeito da adição de açúcares e do processo de envelhecimento na qualidade sensorial de amostras de cachaça obtidas tradicionalmente e por redestilação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do estresse crônico e benzodiazepínicos no reparo ósseo: estudo histológico em ratos

Stress is an environmental factor that may predispose individuals to depression. Benzodiazepines have been prescribed as effective drugs in these situations. The purpose of this study was histological evaluate of the effect of chronic stress and benzodiazepine drugs on bone healing. Bone cavities were created in both tibias of 40 male rats were divided into two groups: Control and Treaty. In this, the stressor stimulus was applied 40 days pre-operative and all post-operative days until sacrifice in the morning for 2 hours, by immobilizing restraint. These animals also received diazepam benzodiazepine group, daily, at a concentration of 5mg/Kg/peso body within 15 days of preoperative. In groups of five animals were sacrificed at 7, 14, 30 and 60 days post-surgery. At 7 days postoperatively, while the control group exhibited tissue rich in fibroblasts, the treated group showed newly formed tissue with few fibroblasts and capillaries along with lymphocytes and macrophages. At 14 days postsurgery, the control group showed newly formed trabecular bone while the treated group progressed to thin trabecular bone with numerous osteoblasts on their borders. At 30 days post-operative bone healing is complete in both groups. At 60 days post-operative characteristics observed in the treated and control groups are similar to the previous period, but with more advanced osteogenesis.

Protocolo radiográfico para a instalação de mini-implantes: descrição da técnica

In the last decade mini-screws have gained popularity in orthodontics field and a correct placement of mini-screws is a critical point to the success of the skeletal anchorage. A careful clinical and radiographic diagnostic before insertion mini-screw is an essential requirement to achieve the central point of the radicular septum. The correct application of these pre-surgical procedures should avoid possible iatrogenic damages in periodontal ligament, dental roots, nasomaxillary cavities, or even important vascular tissues. As of today, periapical radiographs is a regular pre surgical procedure during mini-screw insertion technique. Nevertheless, accurate execution of the radiographic parallax technique can offer to us useful and precise radiographic images, to decide the right local insertion of mini-screws in to the septum bone. The purpose of this paper is to describe the ¬application of new positioning circular guides in conjunction with a ¬parallax radiographic protocol before placement of orthodontic mini-screws.

Influência da menopausa no tratamento endodôntico

A menopausa é uma das mudanças fisiológicas caracterizadas pelo encerramento dos ciclos menstrual e ovulatório, ocorrendo nas mulheres entre a quarta e a quinta década de vida. Com ela, ocorre uma diminuição na produção de estrógeno, um importante hormônio que atua em muitos processos fisiológicos do indivíduo, como a regulação do sistema esquelético. O declínio nos níveis de estrógeno resulta em perda de densidade mineral óssea, aumento do risco de fratura, bem como no aparecimento de doenças ósseas, como a osteoporose, um processo patológico onde há o aumento na reabsorção de cavidades que não são completamente preenchidas por osso neoformado. Além disso, a deficiência de estrógeno pode causar muitas mudanças na saúde bucal do indivíduo. Na presença de uma infecção bacteriana no tecido pulpar, essa deficiência pode agravar a periodontite apical. Vários medicamentos têm sido estudados como potenciais agentes terapêuticos para suprir a deficiência de estrógeno. Essas drogas têm como objetivo reduzir o risco de fraturas e prevenir a perda óssea e distúrbios cardiovasculares e mentais resultantes de deficiência hormonal pós-menopausa. O raloxifeno (RLX), é uma das drogas terapêuticas mais estudadas, demonstrando prevenir a perda óssea. Mesmo com a indicação e benefícios do raloxifeno no metabolismo ósseo e na manutenção da densidade óssea, estudos sobre o seu papel na infecção endodôntica em organismos osteopênicos precisam ser realizados.

Clinical evaluation of multiple-surface ART restorations: three-year follow-up

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bone defect repair on the alveolar wall of the maxillary sinus using collagen membranes and temporal fascia: an experimental study in monkeys

Few studies has been done using guided bone regeneration in maxillary sinus defects. AIM: To assess the bone repair process in surgical defects on the alveolar wall of the monkey maxillary sinus, which communicates with the sinus cavity, by using collagen membranes: Gen-derm - Genius Baumer, Pro-tape - Proline and autologous temporal fascia. MATERIALS AND METHODS: In this prospective and experimental study, orosinusal communications were performed in four tufted capuchin monkeys (Cebus apella) and histologic analysis was carried out 180 days after. RESULTS: In the defects without a cover (control), bone proliferation predominated in two animals and fibrous connective tissue predominated in the other two. In defects repaired with a temporal fascia flap, fibrous connective tissue predominated in three animals and bone proliferation predominated in one. In the defects repaired with Gen-derm or Pro-tape collagen membranes there was complete bone proliferation in three animals and fibrous connective tissue in one. CONCLUSIONS: Surgical defect can be repaired with both bone tissue and fibrous connective tissue in all study groups; collagen membranes was more beneficial in the bone repair process than temporal fascia or absence of a barrier.