Estudos estruturais e cristalização de complexos formados entre toxinas botrópicas e inibidores vegetais

This research presents a study of structural complexes formed between the bothropstoxin BthTX-I and PrTX-I and phospholipase A2 (PLA2s) inhibitor 12- methoxy-4-methyl-voachalotine (MMV) of Tabernamontana catharinensis and rosmarinic acid (Cv-RA) of Rosmarinus officinalis. For both were used cocrystallization experiments with the toxins and inhibitors. In the future, the experimental three-dimensional structures of these complexes will be obtained through the technique of crystallography. Simultaneously, construction occurred in silico of inhibitors Cv-RA and MMV and attempts of docking between these binders and protein structures. These theoretical data provide important information regarding the nature of interactions between inhibitors, toxins and structural changes induced by the protein molecule inhibitors. Therefore, the acquisition of this information has great value to identification, characterization and development (drug design) of compounds with great potential for biotechnology and drug use. Considering further and more relevant aplications, these compounds could be used to control symptoms in many cases of ophidic poisoning and also in combating of pathological processes (degenerative inflammatory diseases and auto-immune diseases, Alzheimer's disease, schizophrenia, among others) whose causes are related to molecules belonging to the same groups of proteins which are classified bothropstoxin that were studied in this project

Análise morfológica de brânquias de peixes Oreochromis niloticus (tilápia) expostos ao níquel

Water is an essential factor in maintaining the vital functions of living beings. We have observed a growing commitment of quality, are due to pollution from many sources and even entire watersheds, whether for industrial waste, sewage, or for substances used in farming such as pesticides, herbicides and fertilizers. Nickel is the 24th most abundant element on earth, is a heavy metal that, in the form of chloride, is a proven genotoxic and mutagenic. Due to its industrial use, there was considerable increase of its concentration in surface sediments. Fish combine characteristics that make them excellent experimental models for aquatic toxicology studies, which are particularly usable as warn about the potential danger of chemicals or the possibility of environmental pollution. Due to impaired water quality and the few published studies relating the nickel with the tissue change, this study aimed at assessing the consequences of the presence of nickel in the aquatic environment. For this analysis, we used individuals of Oreochromis niloticus, exposed for 96 hours at three different concentrations of nickel dissolved in water compared to a control group. After exposure, the gills were removed and these were analyzed by ultramorphological, histological and histochemical analysis. The results indicate that all concentrations used in the experiment altered the histophysiology of exposed individuals. We observed the following changes: rupture of paviment cells, thus resulting in bleeding, loss of microridges surface of these cells and epithelial loss in the gills of all animals in all treatments with nickel chloride, the histochemical analysis showed non-proliferation of chloride cells. However, there was a dose-dependent increase of mucus cells in all animals. Therefore, nickel has toxic potential to fish, from the smallest concentration used up to twice as permitted by law, indicating... (Complete abstract click electronic access below)

Determinação de complexos de urânio em solo usando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

This paper proposes to assess the lability of complexes of uranium in soil using the technique of Diffusion in Thin Films by concentration gradients (DGT) in the vicinity the Osamu Utsumi mine, located in the municipality of Caldas - MG. The technique is based on the 1ª Fick Law, where metal complexes diffuse through a gel, which in turn is adsorbed on a resin. The metals adsorbed are recovered by an analytical technique and quantified by optical emission spectrometer with plasma inductively coupled (ICP-OES) or mass spectrometry with inductively coupled plasma (ICP-MS)

Usinagem da liga de níquel inconel 718 com pastilhas de cerâmica

The machining of super alloys resistant to high temperatures such as nickel alloys, inconel 718 specifically, is a very difficult job to obtain improvements in the process, due to the difficulty of machining at high cutting speeds, the use of these alloys in industries showed great developments in recent years, its application in aeronautical industry spread being used in vane turbo, compressor parts, props and set elements. The automotive, chemical, medical and others also took advantage of the great features of inconel 718 and has used the material. The high temperature resistant alloys have high machining difficulty, a fact that is associated with high cutting forces generated during machining which result in high temperatures. High levels of temperatures can cause deterioration of the cutting edge, with subsequent deformation or breakage, wear most common obtained in machining such materials are flank wear the formation of built-up edge for cutting and notch wear. The experimental part of the work consists in machining of nickel-based alloy Inconel 718 heat treated for hardness, using a tool based ceramic silicon nitride Sandvik (Si3N4) in order to compare the best results obtained in the master's thesis of SANTOS (2010) who used a tool ceramics also the basis of silicon nitride which was developed in the doctoral thesis of SOUZA (2005). Assays were performed on a CNC lathe and was noted for each cutting edge results obtained. Tests were made starting from an initial condition of the tool with cutting speed of 200 m/min, feed 0.5 mm and 0.5 mm depth of cut was reduced cutting speed for the subsequent tests with the same conditions of feed and depth of cut. The tool presented wear instant under two 200 m/min and 100 m/min, premature rupture of 50 m/min and finally cut provided with difficulty... (Complete abstract click electronic access below)

Uso de cascas de laranja como adsorvente de contaminantes no tratamento de água

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cádmio, chumbo, cromo, mercúrio e níquel nos rios do estado de São Paulo e em peixes do Rio Sorocaba (São Paulo, Brasil)

To verify the levels of concentration of some heavy metals in fishes from Sorocaba river (São Paulo, Brazil) and evaluate if this contamination offers health risks to the fishermen, 63 samples of fishes collected from four points along the river were studied for cadmium, lead, chromium, nickel and mercury, with emphasis in this last, since it is the most toxic and most probable as a fish contaminant. Analyzing muscle samples by cold vapor atomic absorption spectrometry it was shown that the fishes are not contaminated. None of the five metals studied were present in prohibitive level and the fishes could be judged secure for human consume. It was also analyzed data from four years of cadmium, lead, chromium, nickel and mercury monitoring made by CETESB, from 1997 to 2000, in water from the main rivers of the State of São Paulo. The study pointed out that the majority of the monitored rivers still present contamination by those metals in a level that requires an improvement of the pollution control actions.

Reconhecimento de contorno de edifício em imagens de alta resolução usando os momentos complexos de Zernike

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Teores elevados de cobre e níquel em dois solos cultivados com laranja no estado de São Paulo

O cultivo de citrus é uma das principais atividades agrícolas no Estado de São Paulo, sendo realizado em solos gerados a partir de diferentes materiais que conferem, naturalmente, variações na constituição química e mineralógica destes, além de poderem, ou não estar contaminados por metais tóxicos oriundos dos métodos defensivos. Com o objetivo de quantificar os atributos químicos e os teores de metais pesados do solo foi realizado um estudo comparativo entre solos assim cultivados, das regiões das cidades de Mogi Guaçu e São José do Rio Preto. Este estudo envolveu a determinação do pH do solo, análises volumétricas para quantificação dos teores de matéria orgânica, Ca+2, Mg+2 e Al+3 , espectrofotômetro de chama para o estabelecimento dos teores de Na+ e K+ e espectrofotômetro de absorção atômica para determinação dos teores de Cobre, Zinco, Cádmio, Cromo, Níquel e Chumbo. O solo da região de Mogi Guaçu apresentou-se mais ácido devido, provavelmente, a uma maior concentração de Al3+. Apresentou, também, teores mais elevados de matéria orgânica. Os solos de ambas as regiões apresentaramse deficientes em Na+ , K+ , Ca+2 e Mg+2 . A análise realizada para os metais pesados mostrou uma elevada quantidade de Níquel observada nas amostras de solo da região de São José do Rio Preto e, Níquel e Cobre, nas de Mogi Guaçu, com valores classificados como de prevenção, de acordo com os Parâmetros Orientadores da CETESB (2005). Estes teores de alerta devem-se, muito possivelmente, à adição exagerada de defensivos agrícolas.

Expressão gênica e potencial de desenvolvimento in vitro dos complexos cúmulos-oócitos ovinos tratados com roscovitina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação de nanofio via deposição eletroquímica utilizando modelo de membrana porosa

From the last decade of the twentieth century, the rapid growth of nanotechnology has resulted in the discovery of a number of forms of nanoparticles and nanoclusters. We can cite as an example: nanotubes, nanowires, nanobelts, and nanoconesnanoclusters which have a wide range of applications, particularly as catalysts magnetic material nanodevices, chemical sensors, degradation of toxic chemicals, or even as possible carriers for the isotope medical applications.. The first step is the production and characterization of nanowires multithreaded using different types of metals (nickel, silver, gold) and polymers (pyrrole), which are prepared by electrochemical deposition process. Will be held by the characterization of the same images of scanning electron microscopy (SEM) and transmission electron microscopy (TEM)

Catalisadores de cobre suportados em óxidos de zircônio hierarquicamente estruturados para a reação de desidrogenação de etanol

Pós-graduação em Química - IQ

Eletro-oxidação de metanol e etanol sobre catalisadores suportados de 'PD''AU'

Pós-graduação em Química - IQ

Desenvolvimento de catalisadores sem platina: estudos comparativos da oxidação de metanol em 'PD''RU'/'C' e 'PT''RU'/'C' em meio alcalino

Pós-graduação em Química - IQ

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ