433 resultados para Caracterização química
Resumo:
The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.
Resumo:
The aim of this work was to evaluate the effect of the addition of different surfactants in physical and chemical properties of spray solutions, droplets spectra and drift potential on agricultural spraying. The surfactants and concentrations (v v-1) were: Haiten (0.1%), Antideriva and Intec (0.05% and 0.1%). The following characteristics were analyzed: surface tension, viscosity, density and electric conductivity. The droplet size spectrum was determined by a laser particle analyzer (Mastersizer S®, version 2.15) including measurements of volume medium diameter (VMD), the percent of droplets below 50 and 100 μm (V50 e V100) and index span. In order to estimate the drift potential, a series of wind tunnel tests were performed with a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) used to apply the spray solutions containing water, the adjuvants and a food color dye (Brilliant blue FD & C no 1) at 0,6% m v-1. The drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The results showed that the addition of adjuvants changed physical and chemical properties of spray solutions in different magnitudes according to the surfactant. Surfactants changed the droplet spectrum and drift potential, indicating that higher VMD and smaller V100 induced higher percentage of drift.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Mulberry (Morus nigra L.) is a fruit with a great potential for technological uses, which could be employed to manufacture of syrups, ice cream, candies, yoghurts, beverages, jam, etc. Only the leaf from mulberry trees is commercially used for silkworm feeding. This tree is cultivated on many agricultural environments such as small rural proprieties and settlements. Small farmers waste a great amount of their production for not knowing about mulberry technology. Thus, the objective of this work was to access extraction yield and physical-chemical properties of mulberry whole juice from ripe, green and a mixture of both by using press and depulper. Statistical analysis of results was carried by media and standard deviation calculations. 173 kg of mulberry were picked being 49.31% ripe and 50.68% green. Press delivered greater extraction yield of whole juice (80.50% to 81.60%) when compared to press (71.43% to 77.50%). Whole juice obtained from both equipments has shown the following values: soluble solids 7.45% - 12.11%, titrable acidity 0.45 – 1.23%, ratio 6.03 – 26.84, pH 3.69 – 4.35, total reducing sugar 4.05% – 9.96%, reducing sugar 3.95% - 9.15%, sucrose 0.00% - 0.04%, turbidity 221.25 NTU - >4,000 NTU. Whole juices obtained from both equipments has shown similar physical-chemical characteristics except turbidity. The authors concluded that press was the best extraction equipment due to its greater yield and whole juice quality regarding turbidity
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Purificação e caracterização de uma gentioexaose obtida de botriosferana por hidrólise ácida parcial
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
As alterações que envolvem as globinas devem-se a modificações em genes responsáveis pela seqüência e estrutura das cadeias polipeptídicas, bem como aos genes reguladores da síntese destas cadeias. Hemoglobinas variantes apresentam estrutura química diferente da hemoglobina normal correspondente, resultante de mutações em uma ou mais bases nitrogenadas, ocasionando a troca de aminoácidos nas globinas alfa, beta, delta ou gama. A hemoglobina N-Baltimore é uma variante de globina beta, com substituição da lisina, na posição 95, por ácido glutâmico, apresentando mobilidade eletroforética mais rápida que a hemoglobina A em pH alcalino. Nas análises eletroforéticas em pH alcalino realizadas em doadores de sangue do Hemocentro de São José do Rio Preto (SP) identificamos a presença de portador de hemoglobina rápida em heterozigose, posteriormente confirmada por focalização isoelétrica e cromatografia líquida de alta pressão (HPLC). Os estudos de hemoglobinas anormais em doadores de sangue permitem a identificação de variantes raras e possibilitam o aconselhamento genético adequado a cada caso com estudo familial.
Resumo:
Neste trabalho aplicamos um método óptico sensível e de baixo custo denominado Schlieren para visualização e caracterização de feixes ultra-sônicos em solução aquosa. Esta caracterização assume papel importante na Medicina para diagnóstico não invasivo via método ultra-sônico.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Glass ionomer cements (GICs) are products of the acid-base setting reaction between an finely fluoro-alumino silicate glass powder and poly(acrylic acid) in aqueous solution. The sol gel method is an adequate route of preparation of the glasses used to obtain the GICs. The objective of this paper was to compare two powders: a commercial and an experimental and to investigate the structural changes during hardening of the cements by FTIR and Al MAS NMR. These analyses showed that the experimental glass powder reacted with organic acid to form the GICs and it is a promising material to manufacture dental cements.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)