Variação e gramaticalização no uso de preposições em contextos de verbos de movimento no português brasileiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Projeto e desenvolvimento de robô cartesiano de baixo custo para manipulação de produtos em linhas de média cadência

Pós-graduação em Engenharia Elétrica - FEB

Desregulação financeira e a crise de 2008

Não disponível

Aplicação da descarga por barreira dielétrica (DBD) em diferentes frequências no tratamento de polipropileno

In this work, air dielectric barrier discharge (DBD) operating at two different frequencies (60 Hz and 17 kHz) was used to improve surface properties of polypropylene (PP). The changes in surface hydrophilicity were investigated by contact angle measurements. The modifications in chemical composition of PP surface were studied by X-ray photoelectron spectroscopy (XPS) and Fourier-transformed infrared spectroscopy (FTIR). The PP roughness were analyzed before and after the DBD treatment using atomic force microscopy (AFM). In order to compare the results obtained at different frequencies, the analyses are presented as a function of the deposited energy density. The results show that both DBD treatments led to formation of low-molecular weight oxidized material (LMWOM). It tends to agglomerate into small mounts on the surface, as shown by AFM analyses. These structures are weakly bounded to the surface and can be easily removed by rinsing in polar solvents. After washing the DBD-treated samples, the PP partially recovers its original wetting characteristics. This suggests that oxidation also occurred at deeper and more permanent levels on the PP samples. Comparing both DBD treatments, the 17 kHz process was found to be more efficient in introducing oxygen groups to the PP surface

Estudo da dinâmica climática e sua influência na qualidade da água de reservatórios urbanos

The present study sought to develop a methodology to analyze the water quality based on concepts and methods of climate and climatology respectively. In this way, it was tried to relate techniques and methodologies hydro and limno-meteorological with a rhythmic analysis technique developed within the Brazilian geographical climatology to assess and analyze the blooms of cyanobacteria, the main index of water quality found in reservoirs of “Alto Tietê” Basin and consequently the Metropolitan Region of São Paulo, an area of high environmental complexity due to its high degree of development and high population density. The meteorological data used to develop the study were collected from the meteorological station of the IAG / USP and the limnological data were collected from the Hydrological Monitoring System implemented by SABESP in Billings and Guarapiranga reservoirs as well as data laboratory of the same entity. The results obtained by the rhythmic and integrated analyze showed that the process of blooms of cyanobacteria is dependent not only on one specific factor, but a combination of meteorological factors that may disrupt the stability of reservoir and which can, during the stabilization process, provides the necessary conditions to the development of cyanobacteria. It was also shown by the results that the pace of Atlantic Polar Front Entrance during the winter in São Paulo, is a limiting factor to the growth of cyanobacteria due to their high frequency, keeping the reservoir balance throughout the period. Furthermore, another importance of this study is the possibility of prevention and forecasting periods which are inappropriate for the use of these reservoirs mainly for recreational activities

Potencial biotecnológico de rizóbios como bioemulsificante e biossorvente de cobre e cromo

Pós-graduação em Microbiologia Agropecuária - FCAV

Avaliação da qualidade de óleos de fritura utilizados em restaurante universitário

Frying is a widely used method of preparing food, because it is a very fast and convenient process, and because it provides specific characteristics of color, flavor, odor, and texture, besides having great consumer acceptance. Therefore, the interest in the physiological effects that oils heated at high temperatures can cause to the human body arises. The aim of this work was to analyze the levels of frying used oil alteration in different kinds of foods served at the university restaurant at “Instituto de Biociências, Letras e Ciências Exatas” (IBILCE), in São José do Rio Preto-SP. In addition, it aims to make the restaurant aware of the good ways to fry and the commitment of providing good quality food to students and professionals of the Institute. With this purpose, determination of total polar compounds, conjugated dienoic acids, peroxide value, and fatty acid profile were analyzed. Two rapid tests were also used: 3M Fat Monitor and Oil Test kit. The results were compared with limits recommended for the disposal of oils and fats used in frying by the Brazilian Health Surveillance Agency (ANVISA), by other countries, and by other researches. Thus, it was concluded that the university restaurant provides the consumers with fried food of good quality, since none of the analyses showed results above recommended, although there is a need of improvement in the quality control of the oil used, in order to avoid unnecessary costs to the university restaurant.

Aspectos históricos sobre a cicloide: a curva que desafia a intuição

O objetivo deste trabalho é resgatar um pouco da rica história do estudo da cicloide. Para isso, ser˜ao mostrados inicialmente os passos da sua construção, as deduç˜oes de suas equaç˜oes polares e cartesianas que, a seguir, ser˜ao utilizadas nos cálculos da área sob um arco dessa curva, da reta tangente, bem como, do comprimento desse arco. Ser˜ao reconstituídas etapas das aplicações da cicloide nos casos do pêndulo de Huygens, em que ela se comporta como isócrona (mesmo tempo) e do problema da braquistócrona (tempo mínimo) que desafiaram os grandes matemáticos dos séculos XVII e XVIII, com destaque para Huygens e os irm˜aos Jakob e Johann Bernoulli.

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Phyllosticta citricarpa: diversidade genética temporal em pomares de citrus sinensis e sensibilidade a fungicidas

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Sistemática, evolução e biologia reprodutiva de Utricularia com ênfase para Utricularia amethystina Salzm. Ex A.St.-Hil. & Girard (Lentibulariaceae)

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Estudo da superfície do carbono vítreo reticulado após tratamento de implantação iônica por imersão em plasma (3IP) para a obtenção de eletrodos

In this work, RVC samples were treated by plasma immersion ion implantation (PIII) for electrodes production. High-voltage pulses with amplitudes of -3.0 kV or -10.0 kV were applied to the RVC samples while the treatment time was 10, 20 and 30 minutes. Nitrogen, atmospheric air and H2:N2 mixture were employed as plasma sources. The samples were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical measurements. The SEM images present an apparent enhancement of the surface roughness after the treatment probably due to the surface sputtering during the PIII process. This observation is in agreement with the specific electrochemical surface area (SESA) of RVC electrodes. An increase was observed of the SESA values for the PIII treated samples compared to the untreated specimen. Some oxygen and nitrogen containing groups were introduced on the RVC surface after the PIII treatment. Both plasma-induced process: the surface roughening and the introduction of the polar species on the RVC surface are beneficial for the RVC electrodes application

Multiplicação de Diaphorina citri e de Candidatus Liberibacter asiaticus em híbridos de citros indicados como porta-enxerto

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Entre a nostalgia e o dever de memória: a narrativa memorialística de Alfons Cervera

Tras la publicación de una serie de novelas caracterizadas por la experimentación formal y la innovación linguística, el valenciano Alfons Cervera (1947- ) inició un proyecto literario de rememoración de la posguerra española, centrado en una trilogía de novelas: El color del crepúsculo, (1995), Maquis (1997), La noche inmóvil (1999). La trilogía reconstruye la memoria del cotidiano de los habitantes de Los Yesares, nombre fictício atribuído al pueblo de Gestalgar, tierra natal del escritor, en Valencia. Las narrativas presentan semejanzas temáticas y estruturales, así como tienen personajes en común. En El color del crepúsculo, la protagonista Sunta, por medio de un relato rememorativo, intenta recuperar el tiempo perdido, el entorno seguro de la infancia y de la adolescencia. Maquis, segunda novela de la trilogía, por medio de una narrativa fragmentada, relata la historia del cotidiano de los habitantes del mismo pueblo, marcado por la represión y el miedo, y la vida de los guerrilleros, los maquis, que sobreviven en las montañas. Félix, el abuelo de Sunta, es el protagonista de La noche inmóvil que está a la espera de la muerte, atormentado por el recuerdo de su hijo muerto y por las voces de los amigos que ya se fueron. Memoria y ficción construyen un imaginario ambivalente en las novelas, borrando los límites entre la memoria personal, la memoria colectiva y la histórica.