180 resultados para Waxy maize starch
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Physicochemical properties of maize starch obtained under different steeping conditions by intermittent milling and dynamic steeping process (IMDS) were studied. Brazilian dent maize (hybrid XL 606) was milled using a 2x2x3 factorial experimental design with two lactic acid levels (0.0 and 0.55%, v/v), two SO2 levels (0.05 and 0.1%, w/v), and three temperatures (52, 60, and 68degreesC). Properties of starch obtained by conventional wet-milling process (36 hr at 52degreesC, 0.55% lactic acid, and 0.2% SO2) were used for comparison. Starch protein content and solubility increased with presence of lactic acid, while swelling power decreased. Higher SO2 concentration (0.1%) had the same effect as lactic acid on some properties. Steeping temperatures of 60 and 68degreesC increased solubility and most of the thermal properties but reduced swelling power, suggesting stronger starch annealing during IMDS at these temperatures. Some thermal changes on starch granules were visualized by scanning electron microscopy (SEM) at 60 and 68degreesC. Amylose content as well as pasting properties were affected by steeping factors and interactions. Starches from IMDS and conventional wet-milling processes were similar in most properties, indicating that IMDS provides starch with quality similar to that from conventional milling.
Resumo:
The granules of waxy corn starch were isolated and various samples were separated by size and classified according to their average diameter in: non-separated granules (N), granules with diameter < 15 μm (S) and granules with diameter ≥ 15 μm (L). The samples were hydrolyzed by bacterial α-amylase and fungal amyloglucosidase. The starch granules remaining after enzymatic hydrolysis were analysed by X-ray diffraction and optical and scanning electron microscopy. Sephadex G-50 gel permeation chromatography of the dissolved residues from the hydrolysis of the N and S samples was performed directly and after successive enzymatic digestion with pullulanase and β-amylase. The results showed that the percentage of hydrolysis increased with a decrease in diameter. No apparent differences in waxy corn starch when observed under light and scanning electronic microscope were observed, regardless of diameter and enzyme action, although both large and small granules showed extensive surface corrosion after enzymatic attack. X-ray analysis suggested a decrease in the quantity of crystalline areas in the smaller granules, which would explain the high percentage of hydrolysis evidenced by these granules. The elution patterns of the α-glucans of both starches (N and S) were similar and reveled the presence of two fractions which were not susceptible to a-amylase and amyloglucosidase attack suggesting that these fractions were involved in the waxy corn starch crystalline regions. Debranching with pullulanase followed by gel-permeation chromatography showed that the amylopectins from the starch granules studied contained three groups of unit chains instead of the two reported in the literature.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This study aimed to the development of cassava mashed with added maltodextrin of waxy maize starch as an alternative to the semi-ready product. The experimental design was completely randomized using blocks in 4x7 factorial, with three replications. The treatments were the combination of maltodextrin concentrations added in the cassava mass (0, 5, 10 and 15% on dry weight) with storage time (0, 2, 4, 6, 8, 10 and 12 days after preparation) and two condition (environment and refrigerated temperature). The variety chosen to the processing was the IAC 576-70. The data were subjected to variance analysis. The means were compared by Tukey test at 5%. The content of maltodextrin from waxy maize starch to 15% was effective in controlling the increase of texture. The mass of cassava with the addition of maltodextrin showed to be product of easy preparation, showin IAC 576-70g viability to be produced in industrial scale.
Resumo:
Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE
Resumo:
Maize gluten feed (MGF) is a co-product of wet milling of maize, and is composed of structures that remain after most starch, gluten and germ has been extracted from the grain. Although currently used in dog foods, its digestibility and energy values have not been documented. Two techniques were used to determine nutrient digestibility of MGF for dog foods. Both techniques used extruded diets fed to Beagle dogs, with six replicates per diet. The first study used a difference method in which 300 g/kg of a reference diet was replaced by MGF. Based on the difference method, the coefficient of total tract apparent digestibility (CTTAD) of MGF was 0.53 for dry matter (DM), 0.69 for crude protein (CP), 0.74 for fat, 0.99 for starch, and 0.55 for gross energy (GE). The calculated metabolizable energy (ME) of MGF was 7.99 MJ/kg (as-fed). The second study used a regression method and included a basal diet and a basal diet with 70, 140 and 210 g MGF/kg of diet (as a substitute for maize starch). Maize gluten feed inclusion resulted in a linear reduction of CTTAD of DM (R(2)=0.99; P<0.001), CP (R(2)=0.95; P=0.002), fat (R(2)=0.87; P=0.009). starch (R(2)=0.81; P<0.001), and GE (R(2)=0.99; P<0.001). Faecal production increased linearly from 56 g to 107 g/dog/d (R(2)=0.99; P<0.001), with a linear reduction of faecal DM (R(2)=0.99: P<0.001) and a linear increase in faecal lactic acid concentration (P<0.02). Both urine (R(2)=0.77; P=0.029) and faeces (R(2)=0.92: P=0.019) showed a linear reduction in pH. Results of ingredient MAD obtained by the regression and difference methods were close (6% or less of variation) for CP, fat, and starch, and also for ME content (1.4% higher for the difference method), but the two methods disagreed on calculated CTTAD of DM and organic matter. The high dietary fiber content of MGF (382 g/kg) may explain the low digestibility of this ingredient. Maize gluten feed could be a useful ingredient for formulations designed to have low energy or reduce the urine pH of dogs. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Este trabalho avaliou a influência da concentração de amido de milho nas características físicas e na liberação in vitro de paracetamol a partir de comprimidos. Os granulados foram analisados quanto à granulometria e densidades aparentes bruta e compactada e os comprimidos quanto ao peso médio, espessura, dureza, friabilidade, tempo de desintegração. Os comprimidos foram preparados a partir de granulados obtidos por granulação a úmido, utilizando cozimento de amido a 10% como agente granulante, segundo três formulações. Embora os comprimidos obtidos tenham apresentado características dentro dos limites farmacopéicos, os resultados indicam que variações da concentração de amido provocam diferenças nos diversos parâmetros físicos estudados. Concentração mais alta de amido em pó dá origem, provavelmente, à interação entre os componentes da fórmula, interferindo na liberação in vitro do fármaco. Isto demonstra a importância de se otimizar a concentração dos adjuvantes numa formulação de comprimidos, pois, embora uma pequena variação nesta concentração não exerça efeito significativo no tempo de desintegração, a quantidade de fármaco liberado pode ser substancialmente alterada.
Resumo:
Visando obter informações a respeito da estrutura dos grânulos, amidos de milho normal e ceroso foram isolados e submetidos à ação da a-amilase e amiloglucosidase. Para elucidar a estrutura dos grânulos, os resíduos desta hidrólise foram submetidos à cromatografia de permeção em gel Sephadex G-50, diretamente e após sucessivas digestões enzimáticas com pululanase e b-amilase. Os resultados mostraram que existem diferenças nos resíduos dos amidos de milho ceroso e normal, tratados com a-amilase e amiloglucosidase. No resíduo do amido de milho ceroso, os perfis de eluição mostraram duas frações a 290 e 350 ml (picos I e II) respectivamente, que não eram suscetíveis ao ataque da a-amilase e amiloglucosidase, indicando que estas frações faziam parte das zonas cristalinas do amido. Estas frações também faziam parte das áreas cristalinas no amido normal. A presença do pico V à 390 ml na a-glucana do amido de milho normal sugeriu que além das duas frações não suscetíveis à hidrólise existia outra que também participava das zonas cristalinas deste amido como regiões não suscetíveis às enzimas formando, consequentemente, rede cristalina fortemente associada. A presença deste pico a 390 ml sugeriu arranjo cristalino distinto entre o amido de milho ceroso e o normal.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Cyclodextrins ( CDs) are cyclic oligasaccharides composed by D- glucose monomers joined by alpha- 1,4-D glicosidic linkages. The main types of CDs are alpha-,beta-and gamma-CDs consisting of cycles of six, seven, and eight glucose monomers, respectively. Their ability to form inclusion complexes is the most important characteristic, allowing their wide industrial application. The physical property of the CD-complexed compound can be altered to improve stability, volatility, solubility, or bio-availability. The cyclomaltodextrin glucanotransferase ( CGTase, EC 2.4.1.19) is an enzyme capable of converting starch into CD molecules. In this work, the CGTase produced by Bacillus clausii strain E16 was used to produce CD from maltodextrin and different starches ( commercial soluble starch, corn, cassava, sweet potato, and waxy corn starches) as substrates. It was observed that the substrate sources influence the kind of CD obtained and that this CGTase displays a beta- CGTase action, presenting a better conversion of soluble starch at 1.0%, of which 80% was converted in CDs. The ratio of total CD produced was 0: 0.89: 0.11 for alpha/beta/gamma. It was also observed that root and tuber starches were more accessible to CGTase action than seed starch under the studied conditions.
Resumo:
Em virtude da progressiva substituição dos adjuntos amiláceos pelos xaropes com alta concentração de maltose nas cervejarias brasileiras, o presente trabalho teve por objetivo comparar hidrolisados de milho e de mandioca, como adjunto de malte, na fabricação de cerveja tipo Pilsen, em escala de laboratório. Os hidrolisados foram produzidos a partir de amido de milho e fécula de mandioca, sendo que na liqüefação e sacarificação da fração amilácea destes produtos foram utilizadas, respectivamente, as enzimas comerciais Termamil (alfa amilase bacteriana) e Fungamil (alfa amilase fúngica). Na fabricação das cervejas, a proporção de malte e hidrolisado foi de 2 para 1, na base do extrato. O mosto foi produzido pelo processo de infusão e após resfriamento e clarificação foi inoculado com levedura cervejeira de baixa fermentação. A fermentação transcorreu a 10 °C até 90% de atenuação do extrato aparente fermentável. As cervejas foram engarrafadas e, em seguida, maturadas a 0 °C, por 14 dias. Terminado o processo de fabricação, as cervejas foram analisadas química e sensorialmente. A semelhança na composição química dos hidrolisados de milho e de mandioca refletiu na composição química dos mostos e das cervejas. Não houve diferença estatística entre os mostos e entre as cervejas testadas para todos os parâmetros químicos analisados. Também, não existiu diferença sensorial entre as cervejas produzidas com hidrolisado de milho e hidrolisado de mandioca. Concluiu-se que a fécula de mandioca apresenta potencial de uso como matéria prima para a fabricação de xarope de maltose de uso cervejeiro e que há elevada probabilidade de sucesso no uso desse xarope para a fabricação de cervejas.
Resumo:
The goal of this study was to evaluate the effect of edible coating pre-treatments on the retention of provitamin A during pumpkin drying. The coatings used were based on native and modified maize and cassava starch. To evaluate the effects of these coatings, slices of 'Dry Rajada' pumpkin were dried at 70 °C both with and without starch coatings applied at 30 and 80-90 °C. Carotenoid content was determined through HPLC using a C 30 column. Significant losses (12-15%) of trans-α-carotene and trans-β-carotene were observed when slices were dried without the coating. Significant improvement of carotenoid content was observed for dehydrated slices that were previously coated with a native maize starch solution at 90 °C, as well as with a modified maize starch solution at 30 °C and also with a modified cassava starch solution at 90 °C. The application of these starch solutions probably produced a more uniform film that adhered to the slices, minimizing carotenoid degradation during pumpkin drying and, as a consequence, resulting in a product that can be considered a good source of provitamin A. © 2012 Elsevier Ltd.