45 resultados para Temperature Factors


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Effect of lactic acid, SO2, temperature, and their interactions were assessed on the dynamic steeping of a Brazilian dent corn (hybrid XL 606) to determine the ideal relationship among these variables to improve the wet-milling process for starch and corn by-products production. A 2x2x3 factorial experimental design was used with SO2 levels of 0.05 and 0.1% (w/v), lactic acid levels of 0 and 0.5% (v/v), and temperatures of 52, 60, and 68degreesC. Starch yield was used as deciding factor to choose the best treatment. Lactic acid added in the steep solution improved the starch yield by an average of 5.6 percentage points. SO2 was more available to break down the structural protein network at 0.1% than at the 0.05% level. Starch-gluten separation was difficult at 68degreesC. The lactic acid and SO2 concentrations and steeping temperatures for better starch recovery were 0.5, 0.1, and 52degreesC, respectively. The Intermittent Milling and Dynamic Steeping (IMDS) process produced, on average, 1.4% more starch than the conventional 36- hr steeping process. Protein in starch, oil content in germ, and germ damage were used as quality factors. Total steep time can be reduced from 36 hr for conventional wet-milling to 8 hr for the IMDS process.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This trial was conducted to evaluate the utilization of low-protein diets formulated based on the ideal protein concept for broiler chickens from 7 to 21 days of age reared at different environmental temperatures. Nine hundred male Cobb-500® chickens were used. At day seven chicks were distributed according to a completely randomized design in a 3 x 3 factorial with four replications of 25 birds each. It was used three crude protein levels in the diet (21.5; 20.0 and 18.5%) and three environmental temperatures (low, thermoneutral and high). The performance, carcass characteristics (yield and chemical composition), and nitrogen ingestion and excretion were assessed. There was no significant interaction among the factors for the evaluated variables. Environmental temperatures affected differently chicken performance. High environmental temperature resulted in lower weight gain and higher wing fat percentage, whereas cold temperature resulted in higher feed conversion. on the other hand, low-protein diets decreased weight gain, breast yield, nitrogen excretion and influenced breast and wings chemical composition. Birds reared at high environmental temperature showed lower nitrogen intake and excretion. The results showed that the decrease in protein levels from 7 to 21 days of age contributed to lower nitrogen excretion in broiler chickens, but impaired performance and carcass characteristics independent of rearing temperature.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The binding selectivity of the M(phen)(edda) (M = Cu, Co, Ni, Zn; phen = 1,10-phenanthroline, edda = ethylenediaminediacetic acid) complexes towards ds(CG)(6), ds(AT)(6) and ds(CGCGAATTCGCG) B-form oligonucleotide duplexes were studied by CD spectroscopy and molecular modeling. The binding mode is intercalation and there is selectivity towards AT-sequence and stacking preference for A/A parallel or diagonal adjacent base steps in their intercalation. The nucleolytic properties of these complexes were investigated and the factors affecting the extent of cleavage were determined to be: concentration of complex, the nature of metal(11) ion, type of buffer, pH of buffer, incubation time, incubation temperature, and the presence of hydrogen peroxide or ascorbic acid as exogenous reagents. The fluorescence property of these complexes and its origin were also investigated. The crystal structure of the Zn(phen)(edda) complex is reported in which the zinc atom displays a distorted trans-N4O2 octahedral geometry; the crystal packing features double layers of complex molecules held together by extensive hydrogen bonding that inter-digitate with adjacent double layers via pi...pi interactions between 1,10-phenanthroline residues. The structure is compared with that of the recently described copper(II) analogue and, with the latter, included in molecular modeling. (C) 2008 Elsevier B.V. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objectives of this study were to evaluate factors that could affect pregnancy rate after embryo transfer (ET) in lactating dairy cow recipients. The trial was conducted at a dairy farm located in Descalvado, SP, Brazil from October 2003 to September 2004. From 1037 cows with CL that were treated with an injection of PGF(2 alpha), 43.3% were detected in heat; 263 were previously assigned at day of PGF(2 alpha) injection for AI and 186 for ET. Ovulation rate was 85.7% (385/449). Pregnancy rate for cows with CL for AI and embryo transfer recipients were 36.5% (84/230) and 58.7% (91/155) at day 25 and 33.0% (76/230) and 45.8% (71/155) at day 46, respectively. Embryonic loss were 9.5% (8/84) for the AI group and 21.9% (20/91) for the ET group. Average milk production was 31.4 L/day/cow. Average daily milk production from 7 days before PGFZ injection to 7 days after ET tended (P < 0.10) to influence pregnancy rate on days 25 and 46. Average daily milk production from the day of embryo transfer to 7 days after influenced embryonic loss (P < 0.05). Cows with higher milk production had lower probability of pregnancy and higher probability of embryonic loss. Cows with higher days in milk had higher probability of pregnancy. Cows with higher rectal body temperature had lower probability of pregnancy and higher probability of embryonic loss. The influence of high milk yield and body temperature on fertility in lactating dairy cow recipients suggests that these effects can occur also after embryo reaches the blastocyst stage. (c) 2005 Elsevier B.V. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objective of this study was to evaluate the factors that may affect conception rates (CR) following artificial insemination (AI) or embryo transfer (ET) in lactating Holstein cows. Estrous cycling cows producing 33.1 +/- 7.2 kg of milk/d received PGF(2 alpha) injections and were assigned randomly to 1 of 2 groups (AI or ET). Cows detected in estrus (n = 387) between 48 and 96 h after the PGF2a injection received AI (n = 227) 12 h after detection of estrus or ET (n = 160) 6 to 8 d later (1 fresh embryo, grade 1 or 2, produced from nonlactating cows). Pregnancy was diagnosed at 28 and 42 d after estrus, and embryonic loss occurred when a cow was pregnant on d 28 but not pregnant on d 42. Ovulation, conception, and embryonic loss were analyzed by a logistic model to evaluate the effects of covariates [days in milk (DIM), milk yield, body temperature (BT) at d 7 and 14 post-AI, and serum concentration of progesterone (P4) at d 7 and 14 post-AI] on the probability of success. The first analysis included all cows that were detected in estrus. The CR of AI and ET were different on d 28 (AI, 32.6% vs. ET, 49.4%) and 42 (AI, 29.1% vs. ET, 38.8%) and were negatively influenced by high BT (d 7) and DIM. The second analysis included only cows with a corpus luteum on d 7. Ovulation rate was 84.8% and was only negatively affected by DIM. Conception rates of AI and ET were different on d 28 (AI, 37.9% vs. ET, 59.4%) and 42 (AI, 33.8% vs. ET, 46.6%) and were negatively influenced by high BT (d 7). The third analysis included only ovulating cows that were 7 d postestrus. Conception rates of AI and ET were different on d 28 (AI, 37.5% vs. ET, 63.2%) and 42 (AI, 31.7% vs. ET, 51.7%) and were negatively influenced by high BT (d 7). There was a positive effect of serum concentration of P4 and a negative effect of milk production on the probability of conception for the AI group but not for the ET group. The fourth analysis was embryonic loss (AI, 10.8% vs. ET, 21.5%). The transfer of fresh embryos is an important tool to increase the probability of conception of lactating Holstein cows because it can bypass the negative effects of milk production and low P4 on the early embryo. The superiority of ET vs. AI is more evident in high-producing cows. High BT measured on d 7 had a negative effect on CR and embryonic retention.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The effects of ambient temperature and humidity, month, age and genotype on sperm production and semen quality in AI bulls in Brazil were evaluated. Data from two consecutive years were analyzed separately. Seven Bos indicus and 11 Bos taurus bulls from one artificial insemination (AI) center were evaluated in Year 1 and 24 B. indicus and 16 B. taurus bulls from three AI centers were evaluated in Year 2. Ambient temperature and humidity did not significantly affect sperm production and semen quality, probably because there was little variation in these variables. Month accounted for less than 2% of the variation in sperm production and semen quality. Increased bull age was associated with decreased sperm motility (P < 0.10) and increased minor sperm defects (P < 0.001) in Year 1. B. indicus bulls had greater (P < 0.005) sperm concentration than B. taurus bulls in both years (1.7 x 10(9)/ml versus 1.2 x 10(9)/ml in Year 1 and 1.6 x 10(9)/ml versus 1.2 x 10(9)/ml in Year 2, respectively). Ejaculate volume was not significantly affected by genotype in Year 1 (6.6 ml versus 6.9 ml in B. indicus and B. taurus bulls, respectively), but B. indicus bulls had greater (P < 0.05) total (11.4 x 10(9) versus 8.2 x 10(9)) and viable (6.7 x 10(9) versus 4.9 x 10(9)) numbers of spermatozoa in the ejaculate than B. taurus bulls. In Year 2, B. taurus bulls had greater (P < 0.05) ejaculate volume than B. indicus bulls (8.2 ml versus 6.7 ml, respectively) and total and viable number of spermatozoa in the ejaculate were not significantly different between genotypes (10.3 x 10(9) versus 9.1 x 10(9) and 6.1 x 10(9) versus 5.4 x 10(9) in B. indicus and B. taurus bulls, respectively). Sperm motility was not significantly affected by genotype (mean, 59%). In Year 1, B. indicus bulls tended (P < 0.10) to have more major sperm defects and had more (P < 0.05) total sperm defects than B. taurus bulls (11.8% versus 8.7% and 13.6% versus 10.0%, respectively). In Year 2, B. indicus bulls tended (P < 0.10) to have more total sperm defects than B. taurus bulls (16.2% versus 13.3%, respectively). In conclusion, neither ambient temperature and humidity nor month (season) significantly affected sperm production and semen quality. B. indicus bulls had significantly greater sperm concentration and B. taurus bulls had significantly fewer morphologically defective spermatozoa. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The demand for aesthetic restorations has increased during the last years. Dental ceramics are a successful alternative for some cases because of aesthetics and biocompatibility. Therefore, the aim of this literature review was to present the factors necessary to fabricate all-ceramic restorations with aesthetics similar to natural dentition. A search of English-language peer-review literature was completed using MEDLINE database from 1975 to 2009 including the keywords "aesthetic," "metal-free crown," "all-ceramic," and "color." It was observed that several factors influence aesthetics of all-ceramic restorations. Color scale, light source during color evaluation, characteristic of core material, color of supporting tooth, presence of root post, and type of cement are clinical factors that may influence color of the restorations. Laboratorial factors as technique for ceramic condensation, thickness, temperature, and number of firing cycles also influence the result of these crowns. Although several clinical and laboratorial factors influence aesthetics of all-ceramic restorations, the aesthetic success and longevity of these restorations depend on the integration with surrounding periodontal tissue.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The aim of the present study was to examine the benthic fauna in a marginal pond lateral to the Paranapanema River and to identify the main controlling factors of its distribution. Considering the small size of the lacustrine ecosystem, we expected that seasonal variations of the benthic community attributes are more important than spatial variations; Methods: Two samplings, one in March and another in August, were carried out at nine sites in the pond. Sediment samples were obtained through a Van Veen grab for invertebrate sorting, granulometric analysis, and for quantification of organic matter in sediment. Other abiotic factors were measured, such as water transparency, dissolved oxygen, pH, electric conductivity, temperature, and depth of sediment sampling sites. Regarding the comparative analysis at spatial scale, no significant variations in density of the benthic invertebrate community were found. Results: In relation to the studied abiotic factors, only depth presented significant differences among sampling sites; All the measured environmental parameters presented significant differences among sampling months, except depth and the physical and chemical characteristics of the sediment. The abundance of Chaoboridae and Chironomidae was the unique attribute with a significant difference in comparing the two months. A higher abundance of taxa occurred in August, especially for Oligochaeta, Nematoda, Chaoboridae, and Chironomidae; Conclusions: Because of the low structural complexity of the studied pond, we concluded that the changes in benthic macroinvertebrate community attributes were mainly due to seasonal effects.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Using bidimensional arenas, the construction and spatial dispersion of tunnels constructed by Coptotermes gestroi and Heterotermes tenuis (Rhinotermitidae) was determined under different laboratory conditions. Workers of both species showed an increase of the tunneled area with the rise in temperature. The activity of workers of C gestroi also increased with the rise in soil moisture. Primary tunnels showed a high degree of dispersion in the arenas for all treatments. The presence of food did not influence the tunneling pattern of C. gestroi; but for H. tenuis there was a significant decrease in the number of tunnels. In addition, the type of substrate affected the tunneling pattern in both species. The understanding of food searching strategies of subterranean termites could contribute in the improvement of pest management programs based on the use of toxic baits. (c) 2005 Elsevier B.V. All rights reserved.