Structural Evaluation of Mechanically Alloyed and Heat-Treated Ti-25at-%Si Powders

This work discusses on the structural evaluation of mechanically alloyed and heat-treated Ti-25at%Si powders. The milling process was conducted in a planetary ball mill using stainless steel balls/vials, 200 rpm and ball-to-powder weight ratio of 5:1, whereas the heat treatment was conducted under Ar atmosphere at 1100 C for 4 h. Samples were characterized by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and energy dispersive spectrometry. The Si peaks disappeared after milling for 30h, indicating that the Si atoms were dissolved into the Ti lattice in order to form an extended solid solution. The Ti peaks were broadened and their intensities reduced for longer milling times whereas a halo was formed in Ti-25Si powders milled for 200h suggesting that an amorphous structure was achieved. The crystallite size was decreased with increasing milling times. A large Ti3Si amount was found in mechanically alloyed Ti-25at%Si powders after heating at 1100 degrees C for 4h.

Structural Evaluation of Mechanically Alloyed (67-x)Ti-xZr-22Si-11B Powders

The present work reports on the structural evaluation of mechanically alloyed Ti-xZr-22Si-11B (x = 5, 7, 10, 15 and 20 at-%) powders. Milled powders and hot-pressed alloys were characterized by X-ray diffraction, electron scanning microscopy, and electron dispersive spectrometry. The Si and B atoms were preferentially dissolved into the Ti and Zr lattices during ball milling of Ti-xZr-22Si-11B (x = 7, 10, 15 and 20 at-%) powders, and extended solid solutions were achieved. The displacement of Ti peaks was more pronounced to the direction of lower diffraction angles with increasing Zr amounts in mechanically alloyed Ti-Zr-Si-B powders, indicating that the Zr atoms were also dissolved into the Ti lattice.

Structural evaluation of the effects of chronic ethanol ingestion on the testis of Calomys callosus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fluazuron-induced morphological changes in Rhipicephalus sanguineus Latreille, 1806 (Acari: Ixodidae) nymphs: An ultra-structural evaluation of the cuticle formation and digestive processes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and ultrastructural characterization of buffalo fetus (Bubalus bubalis) ovarian germinative cells

The objective of the present study was to characterize ovogones, primary oocytes and preantral follicles of buffalo fetus in different ages of gestation. For this, 29 fetuses were collected from a slaughterhouse (Frigol, Brazil) and crown-rump lengths were measured to estimate the fetal age (0-3, 4-6, 7-10 months of gestation). The ovaries were removed and ovarian tissue was processed for classic histology and transmission eletron microscopy examination. The structural evaluation demonstrated that in the first period of the gestation (0-3 months) the buffalo fetus showed ovogones (in mitotic division) and in some cases, the primary oocytes surrounded by somatic cells. In the second period (4-6 months), it was verified that the preantral follicles were completely formed. In the last period (70 month to the end of gestation) the ovaries contained a large amount of preantral follicles, and in some fetuses, antral follicles were observed. The ultrastructural analysis of the ovogones, primary oocytes and preantral follicles showed that these cells have few organelles and the quantity of mitochondria, endoplasmatic reticulum and apparatus Golgi complex is increased as the germinative cells passing from one stage to another.

Cellular and extracellular behavior in the gerbil (Meriones unguiculatus) ventral prostate following different types of castration and the consequences of testosterone replacement

Mongolian gerbils (Meriones unguiculatus) were grouped into two experimental groups: GEx.01 suffered orchiectomy and after 30 days received doses of testosterone cipionate (T), while GEx.02 received weekly and alternated doses of the anti-androgens cyproterone acetate and flutamide for 30 days, and the animals were then euthanized. Structural evaluation reveals a more intense reduction in epithelial height in GEx.02. Smooth muscle cells (SMC) presented a star-shaped aspect after 30 days of hormonal ablation and basal membrane was shown to be more intensely grooved in GEx.01. In both groups, after hormonal replacement, recovery in epithelial height could be noted and the SMC presented its phenotypes, but an increase in RER was seen, characterizing a modulation from its contractile to secreting phenotype. In conclusion, the prostate presented involution capacity after androgen ablation and the ability to reorganize after hormonal replacement, but events resulting from orchiectomy and subsequent T replacement were shown to be more aggressive to the prostate. (c) 2006 International Federation for Cell Biology. Published by Elsevier Ltd. All rights reserved.

Optical and transport properties of rare-earth trivalent ions located at different sites in sol-gel SnO2

Photoluminescence and photo-excited conductivity data as well as structural analysis are presented for sol-gel SnO2 thin films doped with rare earth ions Eu3+ and Er3+, deposited by sol-gel-dip-coating technique. Photoluminescence spectra are obtained under excitation with various types of monochromatic light sources, such as Kr+, Ar+ and Nd:YAG lasers, besides a Xe lamp plus a selective monochromator with UV grating. The luminescence fine structure is rather different depending on the location of the rare-earth doping, at lattice symmetric sites or segregated at the asymmetric grain boundary layer sites. The decay of photo-excited conductivity also shows different trapping rate depending on the rare-earth concentration. For Er-doped films, above the saturation limit, the evaluated capture energy is higher than for films with concentration below the limit, in good agreement with the different behaviour obtained from luminescence data. For Eu-doped films, the difference in the capture energy is not so evident in these materials with nanoscocopic crystallites, even though the luminescence spectra are rather distinct. It seems that grain boundary scattering plays a major role in Eu-doped SnO2 films. Structural evaluation helps to interpret the electro-optical data. © 2010 IOP Publishing Ltd.

High-pressure assisted sintering of Ti-20Si-10B and Ti-10Si-5B powders

This work presents the structural characterization of Ti-10Si-5B and Ti-20Si-10B (at-%) alloys produced by high-pressure assisted sintering. Sintering was performed in air at 1100 and 1200°C for 60 s using pressure levels of 5 GPa. Structural evaluation of sintered samples was conducted by means of scanning electron microscopy and energy dispersive spectrometry. Samples were successfully consolidated after sintering, which presented theoretical density values higher than 99%. The microstructures of the sintered Ti-10Si-5B and Ti-20Si-10B alloys revealed the presence of the TiSS, TiB, TiB2, Ti5Si3, Ti5Si4, TiSi, and TiSi2.phases. A small amount of Ti6Si2B was formed after high-pressure assisted sintering of the Ti-20Si-10B alloy (5GPa, 1100°C for 60 s) indicating that equilibrium structures were not achieved during short sintering times. No oxygen and carbon contamination was detected in structures of Ti-Si-B alloys after high-pressure sintering at 1100 and 1200°C without controlled atmosphere. © (2012) Trans Tech Publications, Switzerland.

Efeito das ondas de choque extracorpóreas na desmite experimentalmente induzida em eqüinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural characterization and in vivo evaluation of retinyl palmitate in non-ionic lamellar liquid crystalline system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-destructive evaluation tool for monitoring and detection of structural damage by using neural network.

This work studies the capability of generalization of Neural Network using vibration based measurement data aiming at operating condition and health monitoring of mechanical systems. The procedure uses the backpropagation algorithm to classify the input patters of a system with different stiffness ratios. It has been investigated a large set of input data, containing various stiffness ratios as well as a reduced set containing only the extreme ones in order to study generalizing capability of the network. This allows to definition of Neural Networks capable to use a reduced set of data during the training phase. Once it is successfully trained, it could identify intermediate failure condition. Several conditions and intensities of damages have been studied by using numerical data. The Neural Network demonstrated a good capacity of generalization for all case. Finally, the proposal was tested with experimental data.

HPLC-ESIMSn Profiling, Isolation, Structural Elucidation, and Evaluation of the Antioxidant Potential of Phenolics from Paepalanthus geniculatus

The methanol extract of the flowers of Paepalanthus geniculatus Kunth. showed radical-scavenging activity in the TEAC assay. An analytical approach based on HPLC:ESIMSn was applied to obtain the metabolite profile of this extract and led to the rapid identification of 19 polyphenolic compounds comprising flavonoids and naphthopyranones. The new naphthopyranone (10, 16), quercetagetin (1, 5, 7, 13), and galetine derivatives (9, 11, 17, 19), and a flavonol glucoside cyclodimer in the truxillate form (12), were identified. Compounds 2, 6, and 7 showed the highest antioxidant capacity and ability to affect the levels of intracellular ROS in human prostate cancer cells (PC3).

Structural health evaluation by optimization techinique and artificial neural network

This paper presents two different approaches to detect, locate, and characterize structural damage. Both techniques utilize electrical impedance in a first stage to locate the damaged area. In the second stage, to quantify the damage severity, one can use neural network, or optimization technique. The electrical impedance-based, which utilizes the electromechanical coupling property of piezoelectric materials, has shown engineering feasibility in a variety of practical field applications. Relying on high frequency structural excitations, this technique is very sensitive to minor structural changes in the near field of the piezoelectric sensors, and therefore, it is able to detect the damage in its early stage. Optimization approaches must be used for the case where a good condensed model is known, while neural network can be also used to estimate the nature of damage without prior knowledge of the model of the structure. The paper concludes with an experimental example in a welded cubic aluminum structure, in order to verify the performance of these two proposed methodologies.